Messages in this thread | | | From | Alexandre Belloni <> | Subject | [RFC 0/5] berlin: add support for clocks sharing registers | Date | Fri, 25 Apr 2014 22:00:18 +0200 |
| |
Some clock on the berlin are sharing registers, this is an attempt at supporting them.
I think there is a third set of regiters to enable/disable the clocks but I don't have any information on that.
I'm also not completely sure of the DT bindings and I know that this is not the way Sebastian was envisionning it.
Alexandre Belloni (5): clk: berlin: add support for clock groups clk: berlin: add berlin clock groups DT bindings documentation ARM: berlin/dt: add support for the clock group to BG2 ARM: berlin/dt: add support for the clock group to BG2D ARM: berlin/dt: add support for the clock group to BG2Q
.../devicetree/bindings/clock/berlin-clock.txt | 29 +++ arch/arm/boot/dts/berlin2.dtsi | 30 ++- arch/arm/boot/dts/berlin2cd.dtsi | 36 +++- arch/arm/boot/dts/berlin2q.dtsi | 24 ++- drivers/clk/berlin/Makefile | 2 +- drivers/clk/berlin/grp.c | 208 +++++++++++++++++++++ 6 files changed, 310 insertions(+), 19 deletions(-) create mode 100644 drivers/clk/berlin/grp.c
-- 1.9.1
| |