lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
From
Hi Ben,

Thanks for the review comments. Please find my responses inline.

Thanks,
Iyappan

On Mon, Apr 14, 2014 at 6:06 AM, Ben Dooks <ben.dooks@codethink.co.uk> wrote:
> On 12/04/14 04:06, Iyappan Subramanian wrote:
>>
>> This patch adds documentation for APM X-Gene SoC ethernet DTS binding.
>>
>> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
>> Signed-off-by: Ravi Patel <rapatel@apm.com>
>> Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
>> ---
>> .../devicetree/bindings/net/apm-xgene-enet.txt | 46
>> ++++++++++++++++++++
>> 1 file changed, 46 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>> b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>> new file mode 100644
>> index 0000000..0c983e8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>> @@ -0,0 +1,46 @@
>> +APM X-Gene SoC Ethernet nodes
>> +
>> +Ethernet nodes are defined to describe on-chip ethernet interfaces in
>> +APM X-Gene SoC.
>> +
>> +Required properties:
>> +- compatible : Should be "apm,xgene-enet"
>> +- reg : First resource is the ethernet base register set
>> + Second resource is the ring base register set
>> + Third resource is the ring command register set
>> +- interrupts : Ethernet main interrupt
>> +- clocks : Reference to the clock entry.
>> +- local-mac-address : Ethernet MAC address.
>> +- phy-addr : Ethernet MII phy address.
>> +- phy-mode : Ethernet MII mode.
>> +
>> +Optional properties:
>> +- status : Should be "ok" or "disabled" for
>> enabled/disabled.
>> + Default is "ok".
>> +
>> +Example:
>> + menetclk: menetclk {
>> + compatible = "apm,xgene-device-clock";
>> + clock-output-names = "menetclk";
>> + status = "ok";
>> + };
>> +
>> + menet: ethernet@17020000 {
>> + compatible = "apm,xgene-enet";
>> + status = "disabled";
>> + reg = <0x0 0x17020000 0x0 0xd100>,
>> + <0x0 0X17030000 0x0 0X400>,
>> + <0x0 0X10000000 0x0 0X200>;
>> + interrupts = <0x0 0x3c 0x4>;
>> + clocks = <&menetclk 0>;
>> + local-mac-address = [00 01 73 00 00 01];
>> + phy-addr = <3>;
>> + phy-mode = "rgmii";
>> + };
>
>
> That doesn't look correct for a phy binding.
>

Okay. I will change the dts to use phy-handle property and remove
phy-addr. I will also rename phy-mode to phy-connection-type as per
Documentation/devicetree/bindings/net/ethernet.txt

>
> --
> Ben Dooks http://www.codethink.co.uk/
> Senior Engineer Codethink - Providing Genius


\
 
 \ /
  Last update: 2014-04-18 08:01    [W:0.070 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site