Messages in this thread | | | Date | Mon, 14 Apr 2014 14:06:55 +0100 | From | Ben Dooks <> | Subject | Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver |
| |
On 12/04/14 04:06, Iyappan Subramanian wrote: > This patch adds documentation for APM X-Gene SoC ethernet DTS binding. > > Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> > Signed-off-by: Ravi Patel <rapatel@apm.com> > Signed-off-by: Keyur Chudgar <kchudgar@apm.com> > --- > .../devicetree/bindings/net/apm-xgene-enet.txt | 46 ++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt > > diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > new file mode 100644 > index 0000000..0c983e8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > @@ -0,0 +1,46 @@ > +APM X-Gene SoC Ethernet nodes > + > +Ethernet nodes are defined to describe on-chip ethernet interfaces in > +APM X-Gene SoC. > + > +Required properties: > +- compatible : Should be "apm,xgene-enet" > +- reg : First resource is the ethernet base register set > + Second resource is the ring base register set > + Third resource is the ring command register set > +- interrupts : Ethernet main interrupt > +- clocks : Reference to the clock entry. > +- local-mac-address : Ethernet MAC address. > +- phy-addr : Ethernet MII phy address. > +- phy-mode : Ethernet MII mode. > + > +Optional properties: > +- status : Should be "ok" or "disabled" for enabled/disabled. > + Default is "ok". > + > +Example: > + menetclk: menetclk { > + compatible = "apm,xgene-device-clock"; > + clock-output-names = "menetclk"; > + status = "ok"; > + }; > + > + menet: ethernet@17020000 { > + compatible = "apm,xgene-enet"; > + status = "disabled"; > + reg = <0x0 0x17020000 0x0 0xd100>, > + <0x0 0X17030000 0x0 0X400>, > + <0x0 0X10000000 0x0 0X200>; > + interrupts = <0x0 0x3c 0x4>; > + clocks = <&menetclk 0>; > + local-mac-address = [00 01 73 00 00 01]; > + phy-addr = <3>; > + phy-mode = "rgmii"; > + };
That doesn't look correct for a phy binding.
-- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius
| |