lkml.org 
[lkml]   [2014]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] BCM59056 PMU regulator support
Date
The BCM59056 is a multi-function power management unit used with the
BCM281xx family of SoCs. This series adds an MFD and voltage regulator
driver to support the BCM59056. The bcm28155-ap DT support is updated
to enable use of regulators on the otg and sdhci peripherals.

Changes since v2:
- Move to mfd_add_devices() approach, eliminating representation
of the regulator block as a hardware subdevice. Regulators are
listed in the PMU binding and referenced via the parent device
of_node by the regulator driver.
- Allow mfd driver to build as module
- Remove regulator constraints from the .dtsi include only the
board-specific constraints in the board .dts.

Changes since v1:
- renamed to bcm590xx to accomodate future family parts
- remove use of subsys_initcall
- fix BCM590XX_MAX_REGISTER value
- remove unused chip id in mfd of/i2c matching
- switch to of_platform_populate() in mfd
- update binding to single document with regulators as optional
properties in the regulator subdevice IP description
- remove unused regulator get/set mode ops
- remove unneeded regulator NULL constraint check
- regulators property is optional, allow the driver to probe
when it is missing
- move of_node presence check into bcm590xx_parse_dt_reg_data()

Matt Porter (5):
mfd: add bcm590xx pmu DT binding
mfd: add bcm590xx pmu driver
regulator: add bcm590xx regulator driver
ARM: configs: bcm_defconfig: enable bcm590xx regulator support
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap

Documentation/devicetree/bindings/mfd/bcm590xx.txt | 41 ++
arch/arm/boot/dts/bcm28155-ap.dts | 47 ++-
arch/arm/boot/dts/bcm59056.dtsi | 77 ++++
arch/arm/configs/bcm_defconfig | 7 +
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 1 +
drivers/mfd/bcm590xx.c | 93 +++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bcm590xx-regulator.c | 413 +++++++++++++++++++++
include/linux/mfd/bcm590xx.h | 31 ++
11 files changed, 726 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/bcm590xx.txt
create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
create mode 100644 drivers/mfd/bcm590xx.c
create mode 100644 drivers/regulator/bcm590xx-regulator.c
create mode 100644 include/linux/mfd/bcm590xx.h

--
1.8.4



\
 
 \ /
  Last update: 2014-03-11 17:21    [W:0.070 / U:1.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site