Messages in this thread Patch in this message | | | From | Peter Rosin <> | Subject | [PATCH] ASoC: pcm512x: Trigger auto-increment of register addresses on i2c | Date | Mon, 8 Dec 2014 16:33:11 +0100 |
| |
From: Peter Rosin <peda@axentia.se>
When the codec is connected using i2c, it will only auto-increment register addresses if msb (0x80) of the register address byte is set.
Signed-off-by: Peter Rosin <peda@axentia.se> --- sound/soc/codecs/pcm512x-i2c.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/pcm512x-i2c.c b/sound/soc/codecs/pcm512x-i2c.c index 4d62230bd378..d0547fa275fc 100644 --- a/sound/soc/codecs/pcm512x-i2c.c +++ b/sound/soc/codecs/pcm512x-i2c.c @@ -24,8 +24,13 @@ static int pcm512x_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct regmap *regmap; + struct regmap_config config = pcm512x_regmap; - regmap = devm_regmap_init_i2c(i2c, &pcm512x_regmap); + /* msb needs to be set to enable auto-increment of addresses */ + config.read_flag_mask = 0x80; + config.write_flag_mask = 0x80; + + regmap = devm_regmap_init_i2c(i2c, &config); if (IS_ERR(regmap)) return PTR_ERR(regmap); -- 1.7.10.4
| |