lkml.org 
[lkml]   [2014]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] trivial fixes for omap-serial

Trivial fixes for omap-serial.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

index 18c30ca..f43ed2c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -63,7 +63,7 @@
#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)

-#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
+#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz */

/* SCR register bitmasks */
#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
@@ -93,7 +93,7 @@
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
-#define OMAP_UART_WER_MOD_WKUP 0X7F
+#define OMAP_UART_WER_MOD_WKUP 0x7F

/* Enable XON/XOFF flow control on output */
#define OMAP_UART_SW_TX 0x08
@@ -114,7 +114,7 @@ struct uart_omap_dma {
dma_addr_t tx_buf_dma_phys;
unsigned int uart_base;
/*
- * Buffer for rx dma.It is not required for tx because the buffer
+ * Buffer for rx dma. It is not required for tx because the buffer
* comes from port structure.
*/
unsigned char *rx_buf;
@@ -151,7 +151,7 @@ struct uart_omap_port {
int use_dma;
/*
* Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
+ * be saved whenever the register is read, but the bits will not
* be immediately processed.
*/
unsigned int lsr_break_flag;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2014-12-11 23:21    [W:0.020 / U:26.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site