lkml.org 
[lkml]   [2014]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree which improperly strapp-in during the reset period.
Date
Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work.

Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081,
But it outputs LOW during the reset period, which cause the NAND_Tree# enabled.

Add phy_fixup() to disable NAND_Tree by overriding the Operation
Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
arch/arm/mach-at91/board-dt-sama5.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 8fb9ef5..97f7367 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
+#include <linux/phy.h>

#include <asm/setup.h>
#include <asm/irq.h>
@@ -26,8 +27,25 @@

#include "generic.h"

+static int ksz8081_phy_fixup(struct phy_device *phy)
+{
+ int value;
+
+ value = phy_read(phy, 0x16);
+ value &= ~0x20;
+ phy_write(phy, 0x16, value);
+
+ return 0;
+}
+
static void __init sama5_dt_device_init(void)
{
+ if (of_machine_is_compatible("atmel,sama5d4ek") &&
+ IS_ENABLED(CONFIG_PHYLIB)) {
+ phy_register_fixup_for_id("fc028000.etherne:00",
+ ksz8081_phy_fixup);
+ }
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}

--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-11 09:21    [W:0.047 / U:1.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site