Messages in this thread Patch in this message | | | From | Markus Pargmann <> | Subject | [PATCH 1/5] regulator: Add ena_gpio_valid config | Date | Mon, 6 Oct 2014 22:17:11 +0200 |
| |
Most drivers do not set the ena_gpio field of struct regulator_config before passing it to the regulator core. This is fine as long as the gpio identifier that is passed is a positive integer. But the gpio identifier 0 is also valid. So we are not able to decide wether we got a real gpio identifier or not.
To be able to decide if it is a valid gpio that got passed, this patch adds a ena_gpio_valid field that should be set if ena_gpio is a valid gpio and should be used. It is a preperation patch for multiple patches that adapt the drivers and fix the regulator core checks for this field.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> --- include/linux/regulator/driver.h | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index bbe03a1924c0..c561f0faaf61 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -292,6 +292,8 @@ struct regulator_desc { * NULL). * @regmap: regmap to use for core regmap helpers if dev_get_regulator() is * insufficient. + * @ena_gpio_valid: GPIO controlling regulator enable is valid and should be + * used. * @ena_gpio: GPIO controlling regulator enable. * @ena_gpio_invert: Sense for GPIO enable control. * @ena_gpio_flags: Flags to use when calling gpio_request_one() @@ -303,6 +305,7 @@ struct regulator_config { struct device_node *of_node; struct regmap *regmap; + bool ena_gpio_valid; int ena_gpio; unsigned int ena_gpio_invert:1; unsigned int ena_gpio_flags; -- 2.1.0
| |