lkml.org 
[lkml]   [2014]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] kconfig: consolidate arch-specific seccomp options
From
Date

There are some minor updates here from last time:
* added a def_bool instead of separate lines in config
* clarified that the /proc interface is *GONE*

cc'ing a bunch of folks directly now instead of depending
on linux-arch@ to awaken them. I think it's most appropriate
for this to go in via the security tree, but I guess it
could also go directly to Linus.

--

From: Dave Hansen <dave.hansen@linux.intel.com>

There are 7 architecures with "config SECCOMP". They all have
virtually the same help text except for those referencing the
/proc interface. The /proc interface was removed in 2007.

There is *NOTHING* architecture-specific about SECCOMP except
that the syscalls have per-architecture definitions, like every
other syscall. It is absurd to have the option in the
arch-specific menus.

Move it to the security menu, consolidate the 7 down to one, and
remove the embarassingly-ancient help text references and
dependencies on /proc.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-security-module@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: x86@kernel.org
Cc: James Morris <james.l.morris@oracle.com>

---

b/arch/arm/Kconfig | 15 +--------------
b/arch/microblaze/Kconfig | 18 +-----------------
b/arch/mips/Kconfig | 18 +-----------------
b/arch/powerpc/Kconfig | 18 +-----------------
b/arch/s390/Kconfig | 18 +-----------------
b/arch/sh/Kconfig | 17 +----------------
b/arch/sparc/Kconfig | 18 +-----------------
b/arch/x86/Kconfig | 17 +----------------
b/security/Kconfig | 21 ++++++++++++++++++++-
9 files changed, 28 insertions(+), 132 deletions(-)

diff -puN arch/arm/Kconfig~consolidate-seccomp-options arch/arm/Kconfig
--- a/arch/arm/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.576007335 -0800
+++ b/arch/arm/Kconfig 2014-01-29 11:02:31.611008920 -0800
@@ -27,6 +27,7 @@ config ARM
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
+ select HAVE_ARCH_SECCOMP
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
select HAVE_CONTEXT_TRACKING
@@ -1874,20 +1875,6 @@ config UACCESS_WITH_MEMCPY
However, if the CPU data cache is using a write-allocate mode,
this option is unlikely to provide any performance gain.

-config SECCOMP
- bool
- prompt "Enable seccomp to safely compute untrusted bytecode"
- ---help---
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
config SWIOTLB
def_bool y

diff -puN arch/microblaze/Kconfig~consolidate-seccomp-options arch/microblaze/Kconfig
--- a/arch/microblaze/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.578007425 -0800
+++ b/arch/microblaze/Kconfig 2014-01-29 11:02:31.612008965 -0800
@@ -11,6 +11,7 @@ config MICROBLAZE
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select TRACING_SUPPORT
@@ -109,23 +110,6 @@ config CMDLINE_FORCE
Set this to have arguments from the default kernel command string
override those passed by the boot loader.

-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
endmenu

menu "Advanced setup"
diff -puN arch/mips/Kconfig~consolidate-seccomp-options arch/mips/Kconfig
--- a/arch/mips/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.580007516 -0800
+++ b/arch/mips/Kconfig 2014-01-29 11:02:31.613009010 -0800
@@ -11,6 +11,7 @@ config MIPS
select PERF_USE_VMALLOC
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
+ select HAVE_ARCH_SECCOMP
select ARCH_HAVE_CUSTOM_GPIO_H
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -2307,23 +2308,6 @@ config PHYSICAL_START
specified in the "crashkernel=YM@XM" command line boot parameter
passed to the panic-ed kernel).

-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
config USE_OF
bool
select OF
diff -puN arch/powerpc/Kconfig~consolidate-seccomp-options arch/powerpc/Kconfig
--- a/arch/powerpc/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.599008376 -0800
+++ b/arch/powerpc/Kconfig 2014-01-29 11:02:31.613009010 -0800
@@ -102,6 +102,7 @@ config PPC
select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN
select HAVE_KPROBES
select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
select HAVE_MEMBLOCK
@@ -634,23 +635,6 @@ config ARCH_WANTS_FREEZER_CONTROL

source kernel/power/Kconfig

-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
endmenu

config ISA_DMA_API
diff -puN arch/s390/Kconfig~consolidate-seccomp-options arch/s390/Kconfig
--- a/arch/s390/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.601008466 -0800
+++ b/arch/s390/Kconfig 2014-01-29 11:02:31.614009055 -0800
@@ -105,6 +105,7 @@ config S390
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_SECCOMP
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT
select HAVE_BPF_JIT if 64BIT && PACK_STACK
@@ -607,23 +608,6 @@ menu "Executable file formats / Emulatio

source "fs/Kconfig.binfmt"

-config SECCOMP
- def_bool y
- prompt "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y.
-
endmenu

menu "Power Management"
diff -puN arch/sh/Kconfig~consolidate-seccomp-options arch/sh/Kconfig
--- a/arch/sh/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.602008512 -0800
+++ b/arch/sh/Kconfig 2014-01-29 11:02:31.614009055 -0800
@@ -10,6 +10,7 @@ config SUPERH
select HAVE_OPROFILE
select HAVE_GENERIC_DMA_COHERENT
select HAVE_ARCH_TRACEHOOK
+ select HAVE_ARCH_SECCOMP
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_PERF_EVENTS
@@ -680,22 +681,6 @@ config PHYSICAL_START
where the fail safe kernel needs to run at a different address
than the panic-ed kernel.

-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via prctl, it cannot be disabled and the task is only
- allowed to execute a few safe syscalls defined by each seccomp
- mode.
-
- If unsure, say N.
-
config SMP
bool "Symmetric multi-processing support"
depends on SYS_SUPPORTS_SMP
diff -puN arch/sparc/Kconfig~consolidate-seccomp-options arch/sparc/Kconfig
--- a/arch/sparc/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.604008603 -0800
+++ b/arch/sparc/Kconfig 2014-01-29 11:02:31.615009101 -0800
@@ -67,6 +67,7 @@ config SPARC64
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_CONTEXT_TRACKING
select HAVE_DEBUG_KMEMLEAK
+ select HAVE_ARCH_SECCOMP
select RTC_DRV_CMOS
select RTC_DRV_BQ4802
select RTC_DRV_SUN4V
@@ -223,23 +224,6 @@ config EARLYFB
help
Say Y here to enable a faster early framebuffer boot console.

-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on SPARC64 && PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SPARC64 && SMP
diff -puN arch/x86/Kconfig~consolidate-seccomp-options arch/x86/Kconfig
--- a/arch/x86/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.606008693 -0800
+++ b/arch/x86/Kconfig 2014-01-29 11:02:31.616009147 -0800
@@ -102,6 +102,7 @@ config X86
select GENERIC_SMP_IDLE_THREAD
select ARCH_WANT_IPC_PARSE_VERSION if X86_32
select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_SECCOMP
select BUILDTIME_EXTABLE_SORT
select GENERIC_CMOS_UPDATE
select HAVE_ARCH_SOFT_DIRTY
@@ -1584,22 +1585,6 @@ config EFI_STUB

See Documentation/efi-stub.txt for more information.

-config SECCOMP
- def_bool y
- prompt "Enable seccomp to safely compute untrusted bytecode"
- ---help---
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
source kernel/Kconfig.hz

config KEXEC
diff -puN security/Kconfig~consolidate-seccomp-options security/Kconfig
--- a/security/Kconfig~consolidate-seccomp-options 2014-01-29 11:02:31.607008738 -0800
+++ b/security/Kconfig 2014-01-29 11:02:31.616009147 -0800
@@ -167,5 +167,24 @@ config DEFAULT_SECURITY
default "yama" if DEFAULT_SECURITY_YAMA
default "" if DEFAULT_SECURITY_DAC

-endmenu
+config HAVE_ARCH_SECCOMP
+ bool
+
+config SECCOMP
+ def_bool y
+ depends on HAVE_ARCH_SECCOMP
+ prompt "Enable seccomp to safely compute untrusted bytecode"
+ ---help---
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.

+ If unsure, say Y. Only embedded should say N here.
+
+endmenu
_

\
 
 \ /
  Last update: 2014-01-29 20:41    [W:0.062 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site