lkml.org 
[lkml]   [2014]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4]
Date
Hello David, Ben, Florian, Chris and everybody,

this series improves ethoc behavior in gigabit environment:
- first patch introduces two phylib setters for 'advertising' and 'supported'
fields of struct phy_device;
- second patch disables gigabit advertisement in the attached PHY making
possible to use gigabit link without any additional setup;
- third patch adds support to set up MII management bus frequency, adding
new fields to platform data and to OF bindings;
- fourth patch adds basic ethtool support to ethoc driver.

These changes allow to use KC-705 board with 50MHz xtensa core and OpenCores
10/100 Mbps MAC connected to gigabit network without any additional setup.

Changes v1->v2:
- new patch "phy: provide accessors for 'advertising' and 'supported' fields";
- disable both gigabit advertisement and support;
- drop MDIO bus frequency configurability, always configure for standard
2.5MHz;
- allow using common clock framework to provide ethoc clock;
- new patch: "net: ethoc: implement ethtool operations";
- drop device tree bindings documentation patch until common bindings format
for network drivers is decided.

Max Filippov (4):
phy: provide accessors for 'advertising' and 'supported' fields
net: ethoc: don't advertise gigabit speed on attached PHY
net: ethoc: set up MII management bus clock
net: ethoc: implement ethtool operations

drivers/net/ethernet/ethoc.c | 130 ++++++++++++++++++++++++++++++++++++++++++-
include/linux/phy.h | 12 ++++
include/net/ethoc.h | 1 +
3 files changed, 141 insertions(+), 2 deletions(-)

--
1.8.1.4


\
 
 \ /
  Last update: 2014-01-29 07:21    [W:0.103 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site