lkml.org 
[lkml]   [2013]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dma: pl330: Support per channel irq allocation
Date
Some pl330 have per channel irq and it is necessary
to allocate all of them. Loop over irq assigned for this
device to support these pl330 IPs.

For example this IP is available on Xilinx Zynq platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Hi Vinod,

this is the patch I told you about it. I have tested it
just on Zynq(8 dma channels) but it shouldn't break
any other pl330 clones.
One more change has to be done to support all 8 dma channels
which is to extend AMBA_NR_IRQS which is still 2.
But I will send separate patch for it directly to Russell.

Thanks,
Michal

---
drivers/dma/pl330.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 58623dc..96de393 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2922,11 +2922,18 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)

amba_set_drvdata(adev, pdmac);

- irq = adev->irq[0];
- ret = devm_request_irq(&adev->dev, irq, pl330_irq_handler, 0,
- dev_name(&adev->dev), pi);
- if (ret)
- return ret;
+ for (i = 0; i <= AMBA_NR_IRQS; i++) {
+ irq = adev->irq[i];
+ if (irq) {
+ ret = devm_request_irq(&adev->dev, irq,
+ pl330_irq_handler, 0,
+ dev_name(&adev->dev), pi);
+ if (ret)
+ return ret;
+ } else {
+ break;
+ }
+ }

pi->pcfg.periph_id = adev->periphid;
ret = pl330_add(pi);
--
1.8.2.3
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-09-30 09:01    [W:0.066 / U:2.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site