lkml.org 
[lkml]   [2013]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group
Date
The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by
Accel Sensor group one. For the device to probe without error, we'll
need to ensure it's registered with the correct WAI.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/iio/accel/st_accel_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index ea62291..03a2b6b 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -170,6 +170,7 @@ static const struct st_sensors st_accel_sensors[] = {
[2] = LSM330D_ACCEL_DEV_NAME,
[3] = LSM330DL_ACCEL_DEV_NAME,
[4] = LSM330DLC_ACCEL_DEV_NAME,
+ [5] = LSM303DLH_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
@@ -238,8 +239,7 @@ static const struct st_sensors st_accel_sensors[] = {
.sensors_supported = {
[0] = LIS331DLH_ACCEL_DEV_NAME,
[1] = LSM303DL_ACCEL_DEV_NAME,
- [2] = LSM303DLH_ACCEL_DEV_NAME,
- [3] = LSM303DLM_ACCEL_DEV_NAME,
+ [2] = LSM303DLM_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
--
1.8.1.2


\
 
 \ /
  Last update: 2013-09-10 22:01    [W:2.149 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site