lkml.org 
[lkml]   [2013]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group
On 09/10/13 13:49, Lee Jones wrote:
> The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by
> Accel Sensor group one. For the device to probe without error, we'll
> need to ensure it's registered with the correct WAI.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
You clearly have a better datasheet than I have as for that part it doesn't even claim to
have the relevant register to read a who am I from.

Now that datasheet does list odr values as 50, 100, 400 1000 which would put it where it originally
was in these tables.

http://www.st.com/web/en/resource/technical/document/datasheet/CD00260288.pdf

I haven't checked other elements...

I'm confused but suspect we may need another type entry to deal with this one.

> ---
> drivers/iio/accel/st_accel_core.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index ea62291..03a2b6b 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -170,6 +170,7 @@ static const struct st_sensors st_accel_sensors[] = {
> [2] = LSM330D_ACCEL_DEV_NAME,
> [3] = LSM330DL_ACCEL_DEV_NAME,
> [4] = LSM330DLC_ACCEL_DEV_NAME,
> + [5] = LSM303DLH_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> @@ -238,8 +239,7 @@ static const struct st_sensors st_accel_sensors[] = {
> .sensors_supported = {
> [0] = LIS331DLH_ACCEL_DEV_NAME,
> [1] = LSM303DL_ACCEL_DEV_NAME,
> - [2] = LSM303DLH_ACCEL_DEV_NAME,
> - [3] = LSM303DLM_ACCEL_DEV_NAME,
> + [2] = LSM303DLM_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
>


\
 
 \ /
  Last update: 2013-09-14 19:21    [W:0.486 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site