lkml.org 
[lkml]   [2013]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/6] usb: host: add has_tdi_phy_lpm capability bit
Hi,

Le Wed, 31 Jul 2013 18:41:57 +0100,
Tuomas Tynkkynen <ttynkkynen@nvidia.com> a écrit :

> The has_hostpc capability bit indicates that the host controller has
> the HOSTPC register extensions, but at the same time enables clock
> disabling power saving features with the PHY Low Power Clock Disable
> (PHCD) bit.
>
> However, some host controllers have the HOSTPC extensions but don't
> support the low-power feature, so the PHCD bit must not be set on
> those controllers. Add a separate capability bit for the low-power
> feature instead, and change all existing users of has_hostpc to use
> this new capability bit.
>
> The idea for this commit is taken from an old 2012 commit that never
> got merged ("disociate chipidea PHY low power suspend control from
> hostpc")
Note that because of the different register layout (see "add phy low
power suspend for older chipidea core" commit in the same series), we
should not set has_tdi_phy_lpm if has_hostpc == 0 with the current code.

May be you should have change the ehci->has_hostpc to (ehci->has_hostpc
&& ehci->has_tdi_phy_lpm).

BTW Alan make some comment on the commit :
http://marc.info/?l=linux-usb&m=133701342028213&w=2

They may apply to your commit.

>
> Inspired-by: Matthieu CASTET <matthieu.castet@parrot.com>
> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
> ---
> drivers/usb/chipidea/host.c | 1 +
> drivers/usb/host/ehci-hub.c | 14 +++++++-------
> drivers/usb/host/ehci.h | 1 +
> 3 files changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index 40d0fda..9b3aaf1 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -63,6 +63,7 @@ static int host_start(struct ci_hdrc *ci)
> ehci = hcd_to_ehci(hcd);
> ehci->caps = ci->hw_bank.cap;
> ehci->has_hostpc = ci->hw_bank.lpm;
> + ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
>
> ret = usb_add_hcd(hcd, 0, 0);
> if (ret)
> diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
> index 2b70277..8044a74 100644
> --- a/drivers/usb/host/ehci-hub.c
> +++ b/drivers/usb/host/ehci-hub.c
> @@ -183,7 +183,7 @@ static void ehci_adjust_port_wakeup_flags(struct
> ehci_hcd *ehci, spin_lock_irq(&ehci->lock);
>
> /* clear phy low-power mode before changing wakeup flags */
> - if (ehci->has_hostpc) {
> + if (ehci->has_tdi_phy_lpm) {
> port = HCS_N_PORTS(ehci->hcs_params);
> while (port--) {
> u32 __iomem *hostpc_reg =
> &ehci->regs->hostpc[port]; @@ -217,7 +217,7 @@ static void
> ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, }
>
> /* enter phy low-power mode again */
> - if (ehci->has_hostpc) {
> + if (ehci->has_tdi_phy_lpm) {
> port = HCS_N_PORTS(ehci->hcs_params);
> while (port--) {
> u32 __iomem *hostpc_reg =
> &ehci->regs->hostpc[port]; @@ -309,7 +309,7 @@ static int
> ehci_bus_suspend (struct usb_hcd *hcd) }
> }
>
> - if (changed && ehci->has_hostpc) {
> + if (changed && ehci->has_tdi_phy_lpm) {
> spin_unlock_irq(&ehci->lock);
> msleep(5); /* 5 ms for HCD to enter low-power
> mode */ spin_lock_irq(&ehci->lock);
> @@ -435,7 +435,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
> goto shutdown;
>
> /* clear phy low-power mode before resume */
> - if (ehci->bus_suspended && ehci->has_hostpc) {
> + if (ehci->bus_suspended && ehci->has_tdi_phy_lpm) {
> i = HCS_N_PORTS(ehci->hcs_params);
> while (i--) {
> if (test_bit(i, &ehci->bus_suspended)) {
> @@ -788,7 +788,7 @@ static int ehci_hub_control (
> goto error;
>
> /* clear phy low-power mode before resume */
> - if (ehci->has_hostpc) {
> + if (ehci->has_tdi_phy_lpm) {
> temp1 = ehci_readl(ehci, hostpc_reg);
> ehci_writel(ehci, temp1 &
> ~HOSTPC_PHCD, hostpc_reg);
> @@ -1031,12 +1031,12 @@ static int ehci_hub_control (
>
> /* After above check the port must be
> connected.
> * Set appropriate bit thus could put phy
> into low power
> - * mode if we have hostpc feature
> + * mode if we have tdi_phy_lpm feature
> */
> temp &= ~PORT_WKCONN_E;
> temp |= PORT_WKDISC_E | PORT_WKOC_E;
> ehci_writel(ehci, temp | PORT_SUSPEND,
> status_reg);
> - if (ehci->has_hostpc) {
> + if (ehci->has_tdi_phy_lpm) {
> spin_unlock_irqrestore(&ehci->lock,
> flags); msleep(5);/* 5ms for HCD enter low pwr mode */
> spin_lock_irqsave(&ehci->lock,
> flags); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
> index 64f9a08..d034d94 100644
> --- a/drivers/usb/host/ehci.h
> +++ b/drivers/usb/host/ehci.h
> @@ -210,6 +210,7 @@ struct ehci_hcd { /* one
> per controller */ #define OHCI_HCCTRL_LEN 0x4
> __hc32 *ohci_hcctrl_reg;
> unsigned has_hostpc:1;
> + unsigned has_tdi_phy_lpm:1;
> unsigned has_ppcd:1; /* support per-port
> change bits */ u8 sbrn; /*
> packed release number */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-08-01 11:21    [W:0.134 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site