lkml.org 
[lkml]   [2013]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] net/velocity: add poll controller function for velocity nic
Date
Add poll controller function for velocity nic.

Signed-off-by: Amit Uttamchandani <auttamchandani@logicube.com>
---
drivers/net/ethernet/via/via-velocity.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index 1d6dc41..ef77631 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -2376,6 +2376,23 @@ out_0:
return ret;
}

+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * velocity_poll_controller - Velocity Poll controller function
+ * @dev: network device
+ *
+ *
+ * Used by NETCONSOLE and other diagnostic tools to allow network I/P
+ * with interrupts disabled.
+ */
+static void velocity_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ velocity_intr(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
/**
* velocity_mii_ioctl - MII ioctl handler
* @dev: network device
@@ -2641,6 +2658,9 @@ static const struct net_device_ops velocity_netdev_ops = {
.ndo_do_ioctl = velocity_ioctl,
.ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = velocity_poll_controller,
+#endif
};

/**
--
1.8.0.rc0


\
 
 \ /
  Last update: 2013-07-19 03:42    [W:0.064 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site