lkml.org 
[lkml]   [2013]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 9/9] gpio-tz1090-pdc: add TZ1090 PDC gpio driver
From
On Fri, May 24, 2013 at 6:21 PM, James Hogan <james.hogan@imgtec.com> wrote:

> Add a GPIO driver for the low-power Powerdown Controller GPIOs in the
> TZ1090 SoC.
(...)
> + Values for gpio specifier:
> + - GPIO number: a value in the range 0 to 6.
> + - GPIO flags: bit field of flags:
> + 1: active low

Use #include <dt-bindings/gpio/gpio.h>
for flags and symbolic names.

> +Optional properties:
> +- gpio-ranges: Mapping to pin controller pins
> +
> +- interrupts: Individual syswake interrupts (other GPIOs cannot interrupt)
> +
> +
> +Example:
> +
> + pdc_gpios: gpio-controller@02006500 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + compatible = "img,tz1090-pdc-gpio";
> + reg = <0x02006500 0x100>;
> +
> + interrupt-parent = <&pdc>;
> + interrupts = <1 0 0>, /* Syswake 0 */
> + <1 1 0>, /* Syswake 1 */
> + <1 2 0>; /* Syswake 2 */
> + };

Interrupt flags seem to be undocumented here.

Apart from this it's looking nice.

Yours,
Linus Walleij


\
 
 \ /
  Last update: 2013-05-29 18:01    [W:0.150 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site