Messages in this thread | | | From | Oliver Schinagl <> | Subject | [PATCH 0/2] Driver for Allwinner sunxi Security ID | Date | Fri, 17 May 2013 15:35:42 +0200 |
| |
The Allwinner A-series of SoC's have efuses exposed via registers to read the factory programmed e-fuses. These should in theory be programmable but this is still to be confirmed. It does appear that these fuses are unique enough to be used as serial numbers, RSA keys, generate MAC addresses from etc. If it turns out to be user programmable, the use obviously increases. Allwinner did use the fuses initially to determine the chip-type.
This driver supports all currently known chips based on datasheets and 'dumped' drivers that we have so far, the dts is only implemented for known chips.
This is my very first driver so please try to be gentle ;)
Oliver Schinagl (2): Initial support for Allwinner's Security ID fuses Add sunxi-sid to dts for sun4i and sun5i
arch/arm/boot/dts/sun4i-a10.dtsi | 5 + arch/arm/boot/dts/sun5i-a13.dtsi | 5 + drivers/misc/eeprom/Kconfig | 19 ++++ drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/sunxi_sid.c | 218 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 248 insertions(+) create mode 100644 drivers/misc/eeprom/sunxi_sid.c
-- 1.8.1.5
| |