lkml.org 
[lkml]   [2013]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc/host:rtsx: Don't execute power up sequence repeatedly
Date
From: Wei WANG <wei_wang@realsil.com.cn>

For some Realtek's card reader, power up sequence can only be executed
when power has been turned off fully.
So rtsx host should not start power up sequence again when set_ios been
called if the power has been turned on.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index f981f7d..ad13f42 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -57,6 +57,9 @@ struct realtek_pci_sdmmc {
bool eject;
bool initial_mode;
bool ddr_mode;
+ int power_state;
+#define SDMMC_POWER_ON 1
+#define SDMMC_POWER_OFF 0
};

static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host)
@@ -765,6 +768,9 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
struct rtsx_pcr *pcr = host->pcr;
int err;

+ if (host->power_state == SDMMC_POWER_ON)
+ return 0;
+
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,
@@ -787,6 +793,7 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
if (err < 0)
return err;

+ host->power_state = SDMMC_POWER_ON;
return 0;
}

@@ -795,6 +802,8 @@ static int sd_power_off(struct realtek_pci_sdmmc *host)
struct rtsx_pcr *pcr = host->pcr;
int err;

+ host->power_state = SDMMC_POWER_OFF;
+
rtsx_pci_init_cmd(pcr);

rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0);
@@ -1260,6 +1269,7 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
host->pcr = pcr;
host->mmc = mmc;
host->pdev = pdev;
+ host->power_state = SDMMC_POWER_OFF;
platform_set_drvdata(pdev, host);
pcr->slots[RTSX_SD_CARD].p_dev = pdev;
pcr->slots[RTSX_SD_CARD].card_event = rtsx_pci_sdmmc_card_event;
--
1.7.9.5


\
 
 \ /
  Last update: 2013-03-08 08:44    [W:0.052 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site