lkml.org 
[lkml]   [2012]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
From
Hi,

On Tue, Jul 10, 2012 at 11:28 AM, Rajendra Nayak <rnayak@ti.com> wrote:
> On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
>>
>> Add device tree support for twl6030 usb driver.
>> Update the Documentation with device tree binding information.
>>
>> Signed-off-by: Kishon Vijay Abraham I<kishon@ti.com>
>> ---
>> .../devicetree/bindings/usb/twlxxxx-usb.txt | 18 ++++++++
>> drivers/usb/otg/twl6030-usb.c | 45
>> ++++++++++++++------
>> 2 files changed, 50 insertions(+), 13 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
>> b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
>> new file mode 100644
>> index 0000000..f293271
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
>> @@ -0,0 +1,18 @@
>> +USB COMPARATOR OF TWL CHIPS
>> +
>> +TWL6030 USB COMPARATOR
>> + - compatible : Should be "ti,twl6030-usb"
>> + - interrupts : Two interrupt numbers to the cpu should be specified.
>> First
>> + interrupt number is the otg interrupt number that raises ID interrupts
>> when
>> + the controller has to act as host and the second interrupt number is
>> the
>> + usb interrupt number that raises VBUS interrupts when the controller
>> has to
>> + act as device
>> + - regulator :<supply-name> can be "vusb" or "ldousb"
>> + -<supply-name>-supply : phandle to the regulator device tree node
>> +
>> +twl6030-usb {
>> + compatible = "ti,twl6030-usb";
>> + interrupts =< 4 10>;
>> + regulator = "vusb";
>> + vusb-supply =<&vusb>;
>
>
> This doesn't seem right. Why do you ned a 'regulator' string along
> with the phandle?

The original code was something like
if (twl->features & TWL6025_SUBCLASS)
regulator_name = "ldousb";
else
regulator_name = "vusb";

I wasn't sure how to handle this *TWL6025_SUBCLASS* stuff.

>
>> +};
>> diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
>> index 6a361d2..20b7abe 100644
>> --- a/drivers/usb/otg/twl6030-usb.c
>> +++ b/drivers/usb/otg/twl6030-usb.c
>> @@ -105,7 +105,7 @@ struct twl6030_usb {
>> u8 asleep;
>> bool irq_enabled;
>> bool vbus_enable;
>> - unsigned long features;
>> + const char *regulator;
>> };
>>
>> #define comparator_to_twl(x) container_of((x), struct twl6030_usb,
>> comparator)
>> @@ -153,13 +153,6 @@ static int twl6030_start_srp(struct phy_companion
>> *comparator)
>>
>> static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
>> {
>> - char *regulator_name;
>> -
>> - if (twl->features& TWL6025_SUBCLASS)
>>
>> - regulator_name = "ldousb";
>> - else
>> - regulator_name = "vusb";
>> -
>> /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
>> twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
>>
>> @@ -169,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb
>> *twl)
>> /* Program MISC2 register and set bit VUSB_IN_VBAT */
>> twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
>>
>> - twl->usb3v3 = regulator_get(twl->dev, regulator_name);
>> + twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
>> if (IS_ERR(twl->usb3v3))
>> return -ENODEV;
>>
>> @@ -324,9 +317,9 @@ static int __devinit twl6030_usb_probe(struct
>> platform_device *pdev)
>> {
>> struct twl6030_usb *twl;
>> int status, err;
>> - struct twl4030_usb_data *pdata;
>> - struct device *dev =&pdev->dev;
>>
>> - pdata = dev->platform_data;
>> + struct device_node *np = pdev->dev.of_node;
>> + struct device *dev =&pdev->dev;
>>
>> + struct twl4030_usb_data *pdata = dev->platform_data;
>>
>> twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
>> if (!twl)
>> @@ -335,13 +328,28 @@ static int __devinit twl6030_usb_probe(struct
>> platform_device *pdev)
>> twl->dev =&pdev->dev;
>>
>> twl->irq1 = platform_get_irq(pdev, 0);
>> twl->irq2 = platform_get_irq(pdev, 1);
>> - twl->features = pdata->features;
>> twl->linkstat = OMAP_MUSB_UNKNOWN;
>>
>> twl->comparator.set_vbus = twl6030_set_vbus;
>> twl->comparator.start_srp = twl6030_start_srp;
>> omap_usb2_set_comparator(&twl->comparator);
>>
>> + if (np) {
>> + err = of_property_read_string(np,
>> "regulator",&twl->regulator);
>>
>> + if (err< 0) {
>> + dev_err(&pdev->dev, "unable to get regulator\n");
>> + return err;
>> + }
>
>
> Isn't there a better way for the driver to know which supply to use instead
> of DT passing the supply name?

The problem I see is this same driver is used for twl6030 and twl6025
and the regulator used is different for these two chips (And I think
twl6025 will also use the same dt file as twl6030 as I don't see a
different file for 6025).

Thanks
Kishon


\
 
 \ /
  Last update: 2012-07-10 09:21    [W:0.927 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site