lkml.org 
[lkml]   [2012]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] arm/dts: Audio support for OMAP4 devices (SDP, PandaBoard)
Date
Hello,

The following series enable the audio functionality on OMAP4 based devices using
twl6040 as audio codec.

The series adds the needed bindings in the dts for the OMAP IPs, twl6040 MFD
device and for the audio connection on the board.

To be able to differentiate between PandaBoard and PandaBoardES (they have a bit
different audio configuration) a new dts file has been created which only
changes the audio properties different between the two boards.

Patches for the drivers involved and the documentation related to dts sections
has been either in 3.5 or heading for 3.6.

Regards,
Peter
---
Peter Ujfalusi (7):
arm/dts: omap4: Add entry for OMAP McPDM IP
arm/dts: omap4: Add entry for OMAP DMIC IP
arm/dts: omap4-sdp: Add fixed regulator to represent VBAT
arm/dts: omap4-sdp: Add support for twl6040
arm/dts: omap4-sdp: Enable audio support via device tree
arm/dts: omap4-panda: Audio support for PandaBoard 4430
arm/dts: New dts file for PandaBoardES (4460)

arch/arm/boot/dts/omap4-panda.dts | 37 +++++++++++++++++++
arch/arm/boot/dts/omap4-pandaES.dts | 24 ++++++++++++
arch/arm/boot/dts/omap4-sdp.dts | 68 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 18 +++++++++
4 files changed, 147 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/omap4-pandaES.dts

--
1.7.8.6



\
 
 \ /
  Last update: 2012-06-08 16:41    [W:0.082 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site