lkml.org 
[lkml]   [2012]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ 79/82] wl1251: fix oops on early interrupt
3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <notasas@gmail.com>

commit f380f2c4a12e913356bd49f8790ec1063c4fe9f8 upstream.

This driver disables interrupt just after requesting it and enables it
later, after interface is up. However currently there is a time window
between request_irq() and disable_irq() where if interrupt arrives, the
driver oopses because it's not yet ready to process it. This can be
reproduced by inserting the module, associating and removing the module
multiple times.

Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq().

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/wl1251/sdio.c | 2 +-
drivers/net/wireless/wl1251/spi.c | 3 +--
2 files changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/wl1251/sdio.c
+++ b/drivers/net/wireless/wl1251/sdio.c
@@ -260,6 +260,7 @@ static int wl1251_sdio_probe(struct sdio
}

if (wl->irq) {
+ irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
@@ -267,7 +268,6 @@ static int wl1251_sdio_probe(struct sdio
}

irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
- disable_irq(wl->irq);

wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
--- a/drivers/net/wireless/wl1251/spi.c
+++ b/drivers/net/wireless/wl1251/spi.c
@@ -281,6 +281,7 @@ static int __devinit wl1251_spi_probe(st

wl->use_eeprom = pdata->use_eeprom;

+ irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
@@ -289,8 +290,6 @@ static int __devinit wl1251_spi_probe(st

irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);

- disable_irq(wl->irq);
-
ret = wl1251_init_ieee80211(wl);
if (ret)
goto out_irq;



\
 
 \ /
  Last update: 2012-06-07 09:03    [W:0.858 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site