lkml.org 
[lkml]   [2012]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RFT 1/2] regulator: rc5t583: Convert to regulator_list_voltage_linear()
From
Date
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/rc5t583-regulator.c | 28 +++++++++-------------------
1 files changed, 9 insertions(+), 19 deletions(-)

diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
index 7951260..f5d8537 100644
--- a/drivers/regulator/rc5t583-regulator.c
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -41,9 +41,7 @@ struct rc5t583_regulator_info {
uint8_t deepsleep_reg;

/* Chip constraints on regulator behavior */
- int min_uV;
int max_uV;
- int step_uV;

/* Regulator specific turn-on delay and voltage settling time*/
int enable_uv_per_us;
@@ -62,24 +60,16 @@ struct rc5t583_regulator {
struct regulator_dev *rdev;
};

-static int rc5t583_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
- return ri->min_uV + (ri->step_uV * selector);
-}
-
static int rc5t583_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
int sel, ret;

- if (min_uV < ri->min_uV)
- min_uV = ri->min_uV;
+ if (min_uV < rdev->desc->min_uV)
+ min_uV = rdev->desc->min_uV;

- sel = DIV_ROUND_UP(min_uV - ri->min_uV, ri->step_uV);
+ sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);

if (sel >= rdev->desc->n_voltages) {
dev_err(&rdev->dev, "Invalid selector 0x%02x\n", sel);
@@ -100,7 +90,7 @@ static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
int vsel = regulator_get_voltage_sel_regmap(rdev);
- int curr_uV = rc5t583_list_voltage(rdev, vsel);
+ int curr_uV = regulator_list_voltage_linear(rdev, vsel);

return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
}
@@ -110,12 +100,12 @@ static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
int old_uV, new_uV;
- old_uV = rc5t583_list_voltage(rdev, old_selector);
+ old_uV = regulator_list_voltage_linear(rdev, old_selector);

if (old_uV < 0)
return old_uV;

- new_uV = rc5t583_list_voltage(rdev, new_selector);
+ new_uV = regulator_list_voltage_linear(rdev, new_selector);
if (new_uV < 0)
return new_uV;

@@ -131,7 +121,7 @@ static struct regulator_ops rc5t583_ops = {
.enable_time = rc5t583_regulator_enable_time,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage = rc5t583_set_voltage,
- .list_voltage = rc5t583_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.set_voltage_time_sel = rc5t583_set_voltage_time_sel,
};

@@ -141,9 +131,7 @@ static struct regulator_ops rc5t583_ops = {
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
.disc_bit = _disc_bit, \
.deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
- .min_uV = _min_mv * 1000, \
.max_uV = _max_mv * 1000, \
- .step_uV = _step_uV, \
.enable_uv_per_us = _enable_mv * 1000, \
.change_uv_per_us = 40 * 1000, \
.deepsleep_id = RC5T583_DS_##_id, \
@@ -158,6 +146,8 @@ static struct regulator_ops rc5t583_ops = {
.vsel_mask = _vout_mask, \
.enable_reg = RC5T583_REG_##_en_reg, \
.enable_mask = BIT(_en_bit), \
+ .min_uV = _min_mv * 1000, \
+ .uV_step = _step_uV, \
}, \
}

--
1.7.5.4




\
 
 \ /
  Last update: 2012-05-14 05:41    [W:0.440 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site