lkml.org 
[lkml]   [2012]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] serial:ifx6x60:Keep word size accordance with SPI controller
From
Date

As protocol driver, IFX SPI driver initiate to setup SPI master with default
SPI word size as 16 bit/word, however, SPI master may not adopt this default
value due to SPI controller's capability, it might choose an available value by
itself and set it to spi_device.bits_per_word. In order to keep align with
Controller, IFX driver should make use of this value during SPI transfer,
but the default one.

Signed-off-by: Chen Jun <jun.d.chen@intel.com>
Signed-off-by: channing <chao.bi@intel.com>
---
drivers/tty/serial/ifx6x60.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 675d94a..5919992 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -810,7 +810,8 @@ static void ifx_spi_io(unsigned long data)
ifx_dev->spi_xfer.cs_change = 0;
ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
/* ifx_dev->spi_xfer.speed_hz = 390625; */
- ifx_dev->spi_xfer.bits_per_word = spi_bpw;
+ ifx_dev->spi_xfer.bits_per_word =
+ ifx_dev->spi_dev->bits_per_word;

ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
--
1.7.1




\
 
 \ /
  Last update: 2012-12-12 06:41    [W:0.041 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site