lkml.org 
[lkml]   [2012]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] cuse: do not register multiple devices with the same name
Date
We do not check whether we already registered a CUSE device with a given
name so we might end up with two devices with the same name. Sysfs will
then complain as it cannot create suitable directories.

This patch makes the init-command fail if there is already a device with
the given name. To avoid race-conditions, we protect the whole
registration with a mutex now.

Following the sysfs warnings when registering two devices with the same
name:

------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0xc8/0xf0()
Hardware name: N150P/N210P/N220P
sysfs: cannot create duplicate filename '/devices/virtual/cuse/ttyFseat0'
Modules linked in: btusb bluetooth
Pid: 14089, comm: lt-kmscon Tainted: G W 3.5.3+ #60
Call Trace:
[<ffffffff81136400>] ? sysfs_add_one+0x60/0xf0
[<ffffffff8102f99d>] warn_slowpath_common+0x7d/0xc0
[<ffffffff8102fa83>] warn_slowpath_fmt+0x43/0x50
[<ffffffff81136468>] sysfs_add_one+0xc8/0xf0
[<ffffffff81136686>] create_dir+0x76/0xd0
[<ffffffff81136a14>] sysfs_create_dir+0x84/0xe0
[<ffffffff811fe67b>] kobject_add_internal+0x9b/0x200
[<ffffffff811feb38>] kobject_add+0x68/0xc0
[<ffffffff81310c73>] device_add+0xe3/0x680
[<ffffffff8130f5ae>] ? dev_set_name+0x3e/0x40
[<ffffffff811c6834>] cuse_process_init_reply+0x204/0x410
[<ffffffff811c6630>] ? cuse_open+0xe0/0xe0
[<ffffffff811bb23c>] request_end+0xfc/0x1a0
[<ffffffff811bc6e2>] fuse_dev_do_write+0xa32/0xd10
[<ffffffff811ba435>] ? fuse_copy_one+0x45/0x60
[<ffffffff8109cf06>] ? find_get_page+0x66/0xb0
[<ffffffff811bccc0>] ? fuse_dev_splice_write+0x300/0x300
[<ffffffff811bcd29>] fuse_dev_write+0x69/0x80
[<ffffffff810d569c>] do_sync_readv_writev+0xdc/0x120
[<ffffffff810d57db>] ? rw_copy_check_uvector+0x6b/0x130
[<ffffffff810b9c5e>] ? handle_mm_fault+0x12e/0x1f0
[<ffffffff810d5973>] do_readv_writev+0xd3/0x1e0
[<ffffffff810d5ab0>] vfs_writev+0x30/0x60
[<ffffffff810d5c38>] sys_writev+0x48/0xb0
[<ffffffff815846a2>] system_call_fastpath+0x16/0x1b
---[ end trace 368eb04507b14c94 ]---

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
Hi again

I changed the spinlock to a mutex now. This should make it more readable as
Tejun suggested.

Thanks
David

fs/fuse/cuse.c | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index 1326051..3f392e9 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -45,7 +45,6 @@
#include <linux/miscdevice.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <linux/spinlock.h>
#include <linux/stat.h>
#include <linux/module.h>

@@ -63,7 +62,7 @@ struct cuse_conn {
bool unrestricted_ioctl;
};

-static DEFINE_SPINLOCK(cuse_lock); /* protects cuse_conntbl */
+static DEFINE_MUTEX(cuse_lock); /* protects registration */
static struct list_head cuse_conntbl[CUSE_CONNTBL_LEN];
static struct class *cuse_class;

@@ -117,14 +116,18 @@ static int cuse_open(struct inode *inode, struct file *file)
int rc;

/* look up and get the connection */
- spin_lock(&cuse_lock);
+ rc = mutex_lock_interruptible(&cuse_lock);
+ if (rc)
+ return rc;
+
list_for_each_entry(pos, cuse_conntbl_head(devt), list)
if (pos->dev->devt == devt) {
fuse_conn_get(&pos->fc);
cc = pos;
break;
}
- spin_unlock(&cuse_lock);
+
+ mutex_unlock(&cuse_lock);

/* dead? */
if (!cc)
@@ -308,7 +311,7 @@ static void cuse_gendev_release(struct device *dev)
*/
static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
{
- struct cuse_conn *cc = fc_to_cc(fc);
+ struct cuse_conn *cc = fc_to_cc(fc), *pos;
struct cuse_init_out *arg = req->out.args[0].value;
struct page *page = req->pages[0];
struct cuse_devinfo devinfo = { };
@@ -359,15 +362,23 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
dev_set_drvdata(dev, cc);
dev_set_name(dev, "%s", devinfo.name);

+ mutex_lock(&cuse_lock);
+
+ /* make sure the device-name is unique */
+ list_for_each_entry(pos, cuse_conntbl_head(devt), list) {
+ if (!strcmp(dev_name(pos->dev), dev_name(dev)))
+ goto err_unlock;
+ }
+
rc = device_add(dev);
if (rc)
- goto err_device;
+ goto err_unlock;

/* register cdev */
rc = -ENOMEM;
cdev = cdev_alloc();
if (!cdev)
- goto err_device;
+ goto err_unlock;

cdev->owner = THIS_MODULE;
cdev->ops = &cuse_frontend_fops;
@@ -380,9 +391,9 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
cc->cdev = cdev;

/* make the device available */
- spin_lock(&cuse_lock);
list_add(&cc->list, cuse_conntbl_head(devt));
- spin_unlock(&cuse_lock);
+
+ mutex_unlock(&cuse_lock);

/* announce device availability */
dev_set_uevent_suppress(dev, 0);
@@ -394,7 +405,8 @@ out:

err_cdev:
cdev_del(cdev);
-err_device:
+err_unlock:
+ mutex_unlock(&cuse_lock);
put_device(dev);
err_region:
unregister_chrdev_region(devt, 1);
@@ -524,9 +536,9 @@ static int cuse_channel_release(struct inode *inode, struct file *file)
int rc;

/* remove from the conntbl, no more access from this point on */
- spin_lock(&cuse_lock);
+ mutex_lock(&cuse_lock);
list_del_init(&cc->list);
- spin_unlock(&cuse_lock);
+ mutex_unlock(&cuse_lock);

/* remove device */
if (cc->dev)
--
1.8.0


\
 
 \ /
  Last update: 2012-11-15 14:01    [W:0.122 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site