lkml.org 
[lkml]   [2012]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Add FDT support to Pandaboard initialization
Date
From: Constantine Shulyupin <const@MakeLinux.com>

Problem:
- FDT is supported only by generic OMAP board initialization in arch/arm/mach-omap2/board-generic.c and lacks some configurations, which are not yet configured in FDT (USB for example).
Solution:
- arch/arm/mach-omap2/board-omap4panda.c supports initialization with FDT and without it.

Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
---
arch/arm/mach-omap2/board-omap4panda.c | 33 ++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index bfcd397..fea7a83 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -31,6 +31,7 @@
#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
+#include <linux/of_platform.h>

#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
@@ -526,3 +527,35 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.timer = &omap4_timer,
.restart = omap_prcm_restart,
MACHINE_END
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,omap-infra", },
+ { }
+};
+
+static void __init panda_dt_init(void)
+{
+ of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+ omap4_panda_init();
+}
+
+static const char *omap4_panda_compat[] __initdata = {
+ "ti,omap4-panda",
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_PANDA_DT, "OMAP4 Pandaboard with FDT support")
+ .dt_compat = omap4_panda_compat,
+ .reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
+ .init_irq = omap_gic_of_init,
+ .handle_irq = gic_handle_irq,
+ .init_machine = panda_dt_init,
+ .init_late = omap4430_init_late,
+ .timer = &omap4_timer,
+ .restart = omap_prcm_restart,
+MACHINE_END
--
1.7.9.5


\
 
 \ /
  Last update: 2012-10-27 21:21    [W:2.245 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site