lkml.org 
[lkml]   [2011]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 08/11] misc: Kconfig and Makefile changes for inv_mpu driver
On Thu, 30 Jun 2011 19:18:24 -0700 Nathan Royer wrote:

> Signed-off-by: Nathan Royer <nroyer@invensense.com>
> ---
> drivers/misc/Kconfig | 1 +
> drivers/misc/Makefile | 1 +
> drivers/misc/inv_mpu/Kconfig | 58 +++++++++++++++++++++++++++++++++++++++++
> drivers/misc/inv_mpu/Makefile | 17 ++++++++++++
> 4 files changed, 77 insertions(+), 0 deletions(-)
> create mode 100644 drivers/misc/inv_mpu/Kconfig
> create mode 100644 drivers/misc/inv_mpu/Makefile
>
> diff --git a/drivers/misc/inv_mpu/Kconfig b/drivers/misc/inv_mpu/Kconfig
> new file mode 100644
> index 0000000..fdfa7a6
> --- /dev/null
> +++ b/drivers/misc/inv_mpu/Kconfig
> @@ -0,0 +1,58 @@
> +
> +menuconfig: INV_SENSORS

hm, that ':' there happens to work, but the syntax description for
"menuconfig" does not show it as allowed, and no other Kconfig files use
a colon there, so please drop it.

Oh, also not "default y", please.

> + tristate "Motion Processing Unit"
> + depends on I2C
> + default y
> +
> +if INV_SENSORS
> +
> +choice
> + prompt "MPU Master"
> + depends on I2C && INV_SENSORS
> + default MPU_SENSORS_MPU3050
> +
> +config MPU_SENSORS_MPU3050
> + bool "MPU3050"
> + depends on I2C
> + select MPU_SENSORS_MPU3050_GYRO
> + help
> + If you say yes here you get support for the MPU3050 Gyroscope driver
> + This driver can also be built as a module. If so, the module
> + will be called mpu3050.
> +
> +config MPU_SENSORS_MPU6050A2
> + bool "MPU6050A2"
> + depends on I2C
> + select MPU_SENSORS_MPU6050_GYRO
> + help
> + If you say yes here you get support for the MPU6050A2 Gyroscope driver
> + This driver can also be built as a module. If so, the module
> + will be called mpu6050a2.
> +
> +config MPU_SENSORS_MPU6050B1
> + bool "MPU6050B1"
> + select MPU_SENSORS_MPU6050_GYRO
> + depends on I2C
> + help
> + If you say yes here you get support for the MPU6050 Gyroscope driver
> + This driver can also be built as a module. If so, the module
> + will be called mpu6050b1.
> +
> +endchoice
> +
> +choice
> + prompt "Gyroscope Type"
> + depends on I2C && INV_SENSORS
> + default MPU_SENSORS_MPU3050_GYRO
> +
> +config MPU_SENSORS_MPU3050_GYRO
> + bool "MPU3050 built in gyroscope"
> + depends on MPU_SENSORS_MPU3050
> +
> +config MPU_SENSORS_MPU6050_GYRO
> + bool "MPU6050 built in gyroscope"
> + depends on MPU_SENSORS_MPU6050B1 || MPU_SENSORS_MPU6050A2
> +
> +endchoice
> +
> +endif #INV_SENSORS



---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***


\
 
 \ /
  Last update: 2011-07-01 19:13    [W:0.190 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site