lkml.org 
[lkml]   [2011]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectSamsung Backlight driver
please apply

---------- Forwarded message ----------
From: Tommaso Massimi <tmassimi@gmail.com>
Date: Sat, Apr 23, 2011 at 10:36 PM
Subject: Fwd: [PATCH] Platform: add Samsung Laptop platform driver
To: linux-kernel@vger.kernel.org, Greg Kroah-Hartman <gregkh@suse.de>


Hi,

my samsung laptop would be very happy if you add
these lines to the file drivers/platform/x86/samsung-laptop.c

Thanks
Tommaso Massimi

@@ -666,6 +666,15 @@
               },
               .callback = dmi_check_cb,
       },
+               {
+               .ident = "X520",
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS
CO., LTD."),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "X520"),
+                       DMI_MATCH(DMI_BOARD_NAME, "X520"),
+               },
+               .callback = dmi_check_cb,
+       },
       { },
 };
 MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);


---------- Forwarded message ----------
From: Tommaso Massimi <tmassimi@gmail.com>
Date: Fri, Mar 11, 2011 at 6:57 PM
Subject: Re: [PATCH] Platform: add Samsung Laptop platform driver
To: linux-kernel@vger.kernel.org


On 03/10/2011 08:09 PM, Greg KH wrote:
>On Thu, Mar 10, 2011 at 07:28:00PM +0200, Nikolai Kondrashov wrote:
> > On 03/10/2011 07:19 PM, Greg KH wrote:
> > >Can you provide me the output of:
> > > grep . /sys/class/dmi/id/*
> > >so I can try to add support for this machine to the driver?
> > Sure, here it is.
>
> Great, here's a new version of the samsung-laptop.c file, can you
> replace it whereever you were building the previous one, rebuild it and
> test it for this machine to see if it works?

Hi,
here the output you required from my laptop:
tom@localhost tom_samsung]$ grep . /sys/class/dmi/id/*
/sys/class/dmi/id/bios_date:09/21/2009
/sys/class/dmi/id/bios_vendor:Phoenix Technologies Ltd.
/sys/class/dmi/id/bios_version:04IA.M005.20090921.KSY
/sys/class/dmi/id/board_name:X420/X520
grep: /sys/class/dmi/id/board_serial: Permission denied
/sys/class/dmi/id/board_vendor:SAMSUNG ELECTRONICS CO., LTD.
/sys/class/dmi/id/board_version:Not Applicable
/sys/class/dmi/id/chassis_asset_tag:No Asset Tag
grep: /sys/class/dmi/id/chassis_serial: Permission denied
/sys/class/dmi/id/chassis_type:10
/sys/class/dmi/id/chassis_vendor:SAMSUNG ELECTRONICS CO., LTD.
/sys/class/dmi/id/chassis_version:N/A
/sys/class/dmi/id/modalias:dmi:bvnPhoenixTechnologiesLtd.:bvr04IA.M005.20090921.KSY:bd09/21/2009:svnSAMSUNGELECTRONICSCO.,LTD.:pnX420/X520:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnX420/X520:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct10:cvrN/A:
/sys/class/dmi/id/product_name:X420/X520
grep: /sys/class/dmi/id/product_serial: Permission denied
grep: /sys/class/dmi/id/product_uuid: Permission denied
/sys/class/dmi/id/product_version:Not Applicable
/sys/class/dmi/id/sys_vendor:SAMSUNG ELECTRONICS CO., LTD.
/sys/class/dmi/id/uevent:MODALIAS=dmi:bvnPhoenixTechnologiesLtd.:bvr04IA.M005.20090921.KSY:bd09/21/2009:svnSAMSUNGELECTRONICSCO.,LTD.:pnX420/X520:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnX420/X520:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct10:cvrN/A:
I have added these lines to your source file

668a669,677
>               {
>               .ident = "X520",
>               .matches = {
>                       DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
>                       DMI_MATCH(DMI_PRODUCT_NAME, "X520"),
>                       DMI_MATCH(DMI_BOARD_NAME, "X520"),
>               },
>               .callback = dmi_check_cb,
>       },

When I load the module with the option debug=1,
it turns on and off my backligth and my wireless card,
so I think it is working fine.
Here what dmesg says:

samsung_laptop: module is from the staging directory, the quality is
unknown, you have been warned.
samsung_laptop: found laptop model 'X520'
This computer supports SABI==f48b4
SABI header:
 SMI Port Number = 0x00b2
 SMI Interface Function = 0xc0
 SMI enable memory buffer = 0xc1
 SMI restore memory buffer = 0xc2
 SABI data offset = 0x0f00
 SABI data segment = 0xdf01
ifaceP = 0x000dff10
sabi_iface = ffff8800000dff10
backlight = 0x01
backlight should be off
backlight = 0x00
backlight should be on
backlight = 0x01
wireless led = 0x01
wireless led should be off
wireless led = 0x00
wireless led should be on
wireless led = 0x01
brightness = 0x08
atkbd serio0: Unknown key pressed (translated set 2, code 0x89 on
isa0060/serio0).
atkbd serio0: Use 'setkeycodes e009 <keycode>' to make it known.
Now I think I need only to use the setkeycodes command to have
these new commands under my fingers :)

Thanks for that!!

Tom

PS: I'm not subscribed to the list, so please CC me if you need some other info
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-05-05 19:05    [W:0.035 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site