lkml.org 
[lkml]   [2011]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] serial: core, move termios handling to uart_startup
Date
We should not fiddle with speed and cflags in .dtr_rts hook. Actually
we might not have tty at that moment already.

So move the console cflag copy and speed setup into uart_startup.
Actually the speed setup is already there, but we need to call it
unconditionally (uart_startup is called from uart_open with hw_init =
0).

This means we move uart_change_speed before dtr/rts setup in .dtr_rts.
But this should not matter as the setup should be called after
uart_change_speed anyway.
Before: After:
dtr/rts setup (dtr_rts) uart_change_speed (startup)
uart_change_speed (update_termios) dtr/rts setup (dtr_rts)
dtr/rts setup (update_termios) dtr/rts setup (update_termios)

The second setup will dismiss with the next patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
---
drivers/tty/serial/serial_core.c | 24 +++++++++---------------
1 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index d6e7240..47657cf 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -172,12 +172,16 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in

retval = uport->ops->startup(uport);
if (retval == 0) {
- if (init_hw) {
- /*
- * Initialise the hardware port settings.
- */
- uart_change_speed(tty, state, NULL);
+ if (uart_console(uport) && uport->cons->cflag) {
+ tty->termios->c_cflag = uport->cons->cflag;
+ uport->cons->cflag = 0;
+ }
+ /*
+ * Initialise the hardware port settings.
+ */
+ uart_change_speed(tty, state, NULL);

+ if (init_hw) {
/*
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
@@ -1481,11 +1485,6 @@ static void uart_update_termios(struct tty_struct *tty,
{
struct uart_port *port = state->uart_port;

- if (uart_console(port) && port->cons->cflag) {
- tty->termios->c_cflag = port->cons->cflag;
- port->cons->cflag = 0;
- }
-
/*
* If the device failed to grab its irq resources,
* or some other error occurred, don't try to talk
@@ -1493,11 +1492,6 @@ static void uart_update_termios(struct tty_struct *tty,
*/
if (!(tty->flags & (1 << TTY_IO_ERROR))) {
/*
- * Make termios settings take effect.
- */
- uart_change_speed(tty, state, NULL);
-
- /*
* And finally enable the RTS and DTR signals.
*/
if (tty->termios->c_cflag & CBAUD)
--
1.7.4.1



\
 
 \ /
  Last update: 2011-03-30 00:13    [W:0.029 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site