lkml.org 
[lkml]   [2011]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject[next-20110214] Kernel-modules with unknown parameter
From
Hi,

I have pulled Dave's drm-fixes-staging into today's linux-next and did
not see a KMS-modesetted resolution change in VT (runlevel-3).
After a quick check of my dmesg, I see also my kernel-module for sound
has "unknown parameter".
( Thus, personally I don't think it is a bug from any drm-2.6 tree. )

# dmesg | egrep -i 'unknown|param'
[ 12.431216] radeon: Unknown parameter `modeset'
[ 12.665911] snd_intel8x0m: Unknown parameter `index'
[ 37.311333] radeon: Unknown parameter `modeset'

Any idea what's going on? Stephen, Randy noticed the same like me?

Regards,
- Sedat -

P.S.: Attached are dmesg and kernel dot-config.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-rc4-686-iniza (Debian 2.6.38~rc4-8~next20110214.dileks.1) (sedat.dilek@gmail.com) (gcc version 4.6.0 20110126 (experimental) [trunk revision 169270] (Debian 4.6-20110125-1) ) #1 SMP Mon Feb 14 12:36:01 CET 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
[ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI present.
[ 0.000000] DMI: 2374SG6/2374SG6, BIOS 1RETDRWW (3.23 ) 06/18/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3ff60 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 36ac6000 - 3755b000
[ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 3ff6a672 0004C (v01 IBM TP-1R 00003230 LTP 00000000)
[ 0.000000] ACPI: FACP 3ff6a700 000F4 (v03 IBM TP-1R 00003230 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110112/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110112/tbfadt-557)
[ 0.000000] ACPI: DSDT 3ff6a8e7 0C530 (v01 IBM TP-1R 00003230 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3ff78000 00040
[ 0.000000] ACPI: SSDT 3ff6a8b4 00033 (v01 IBM TP-1R 00003230 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 3ff76e17 00052 (v01 IBM TP-1R 00003230 IBM 00000001)
[ 0.000000] ACPI: TCPA 3ff76e69 00032 (v01 IBM TP-1R 00003230 PTL 00000001)
[ 0.000000] ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003230 LTP 00000001)
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ff60
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff60
[ 0.000000] On node 0 totalpages: 261871
[ 0.000000] free_area_init_node: node 0, pgdat c140cd00, node_mem_map f62c6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 271 pages used for memmap
[ 0.000000] HighMem zone: 34387 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c00000 s27200 r0 d21952 u4194304
[ 0.000000] pcpu-alloc: s27200 r0 d21952 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259824
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc4-686-iniza root=UUID=1ceb69a7-ecf4-47e9-a231-b74e0f0a9b62 ro init=/bin/systemd radeon.modeset=1 lapic 3
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff60)
[ 0.000000] Memory: 1022152k/1047936k available (2717k kernel code, 25332k reserved, 1455k data, 360k init, 138632k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1414000 - 0xc146e000 ( 360 kB)
[ 0.000000] .data : 0xc12a75bb - 0xc1413580 (1455 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12a75bb (2717 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f5818000 soft=f581a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1694.639 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3389.27 BogoMIPS (lpj=6778556)
[ 0.008079] pid_max: default: 32768 minimum: 301
[ 0.008232] Security Framework initialized
[ 0.008274] SELinux: Disabled at boot.
[ 0.008421] Mount-cache hash table entries: 512
[ 0.008930] Initializing cgroup subsys debug
[ 0.008968] Initializing cgroup subsys ns
[ 0.009005] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009054] Initializing cgroup subsys cpuacct
[ 0.009122] Initializing cgroup subsys devices
[ 0.009158] Initializing cgroup subsys freezer
[ 0.009193] Initializing cgroup subsys net_cls
[ 0.009229] Initializing cgroup subsys blkio
[ 0.009340] mce: CPU supports 5 MCE banks
[ 0.009386] CPU0: Thermal monitoring enabled (TM2)
[ 0.009603] SMP alternatives: switching to UP code
[ 0.012757] Freeing SMP alternatives: 8k freed
[ 0.012796] ACPI: Core revision 20110112
[ 0.019636] ACPI: setting ELCR to 0200 (from 0800)
[ 0.020091] weird, boot CPU (#0) not listed by the BIOS.
[ 0.020128] SMP motherboard not detected.
[ 0.020166] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.024001] SMP disabled
[ 0.024001] Performance Events: p6 PMU driver.
[ 0.024001] ... version: 0
[ 0.024001] ... bit width: 32
[ 0.024001] ... generic registers: 2
[ 0.024001] ... value mask: 00000000ffffffff
[ 0.024001] ... max period: 000000007fffffff
[ 0.024001] ... fixed-purpose events: 0
[ 0.024001] ... event mask: 0000000000000003
[ 0.024001] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.024001] Brought up 1 CPUs
[ 0.024001] Total of 1 processors activated (3389.27 BogoMIPS).
[ 0.024001] devtmpfs: initialized
[ 0.024001] PM: Registering ACPI NVS region at 3ff77000 (8192 bytes)
[ 0.024001] print_constraints: dummy:
[ 0.024001] NET: Registered protocol family 16
[ 0.024001] ACPI: bus type pci registered
[ 0.024001] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 0.024001] PCI: Using configuration type 1 for base access
[ 0.024001] bio: create slab <bio-0> at 0
[ 0.025308] ACPI: EC: EC description table is found, configuring boot EC
[ 0.038599] ACPI: Interpreter enabled
[ 0.038638] ACPI: (supports S0 S3 S4 S5)
[ 0.038779] ACPI: Using PIC for interrupt routing
[ 0.041006] ACPI: Power Resource [PUBS] (on)
[ 0.045253] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.048738] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.048776] HEST: Table not found.
[ 0.048812] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.048892] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.049008] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.049012] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.049016] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.049021] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.049025] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.049030] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.049048] pci 0000:00:00.0: [8086:3340] type 0 class 0x000600
[ 0.049058] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.049101] pci 0000:00:01.0: [8086:3341] type 1 class 0x000604
[ 0.049160] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.049206] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
[ 0.049248] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.049294] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
[ 0.049329] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.049375] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
[ 0.049421] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.049444] pci 0000:00:1d.7: reg 10: [mem 0xc0000000-0xc00003ff]
[ 0.049526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.049532] pci 0000:00:1d.7: PME# disabled
[ 0.049553] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.049597] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[ 0.049665] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.049714] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.049767] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[ 0.049782] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.049793] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.049804] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.049816] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.049827] pci 0000:00:1f.1: reg 20: [io 0x1860-0x186f]
[ 0.049838] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.049868] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.049914] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.049953] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.049969] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff]
[ 0.049980] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff]
[ 0.049990] pci 0000:00:1f.5: reg 18: [mem 0xc0000c00-0xc0000dff]
[ 0.050001] pci 0000:00:1f.5: reg 1c: [mem 0xc0000800-0xc00008ff]
[ 0.050040] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.050046] pci 0000:00:1f.5: PME# disabled
[ 0.050063] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[ 0.050080] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff]
[ 0.050091] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f]
[ 0.050143] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.050149] pci 0000:00:1f.6: PME# disabled
[ 0.050175] pci 0000:01:00.0: [1002:4c66] type 0 class 0x000300
[ 0.050191] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.050200] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
[ 0.050209] pci 0000:01:00.0: reg 18: [mem 0xc0100000-0xc010ffff]
[ 0.050234] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.050254] pci 0000:01:00.0: supports D1 D2
[ 0.050290] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.050327] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.050332] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.050337] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
[ 0.050364] pci 0000:02:00.0: [104c:ac55] type 2 class 0x000607
[ 0.050382] pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xb0000fff]
[ 0.050402] pci 0000:02:00.0: supports D1 D2
[ 0.050405] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050411] pci 0000:02:00.0: PME# disabled
[ 0.050432] pci 0000:02:00.1: [104c:ac55] type 2 class 0x000607
[ 0.050450] pci 0000:02:00.1: reg 10: [mem 0xb1000000-0xb1000fff]
[ 0.050470] pci 0000:02:00.1: supports D1 D2
[ 0.050473] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050479] pci 0000:02:00.1: PME# disabled
[ 0.050507] pci 0000:02:01.0: [8086:101e] type 0 class 0x000200
[ 0.050527] pci 0000:02:01.0: reg 10: [mem 0xc0220000-0xc023ffff]
[ 0.050538] pci 0000:02:01.0: reg 14: [mem 0xc0200000-0xc020ffff]
[ 0.050549] pci 0000:02:01.0: reg 18: [io 0x8000-0x803f]
[ 0.050582] pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.050607] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.050613] pci 0000:02:01.0: PME# disabled
[ 0.050634] pci 0000:02:02.0: [168c:1014] type 0 class 0x000200
[ 0.050652] pci 0000:02:02.0: reg 10: [mem 0xc0210000-0xc021ffff]
[ 0.050753] pci 0000:00:1e.0: PCI bridge to [bus 02-08] (subtractive decode)
[ 0.050794] pci 0000:00:1e.0: bridge window [io 0x4000-0x8fff]
[ 0.050800] pci 0000:00:1e.0: bridge window [mem 0xc0200000-0xcfffffff]
[ 0.050806] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff pref]
[ 0.050810] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.050815] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.050893] pci_bus 0000:00: on NUMA node 0
[ 0.050897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.050951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.050980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.054685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.055032] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.055376] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.055720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.056052] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.056424] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.056795] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.057190] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.057553] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.057603] vgaarb: loaded
[ 0.057684] PCI: Using ACPI for IRQ routing
[ 0.057855] PCI: pci_cache_line_size set to 64 bytes
[ 0.057927] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.057931] reserve RAM buffer: 000000003ff60000 - 000000003fffffff
[ 0.059995] pnp: PnP ACPI init
[ 0.060036] ACPI: bus type pnp registered
[ 0.060742] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.060747] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.060751] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.060754] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.060758] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.060761] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.060765] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.060768] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.060772] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.060775] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.060779] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.060782] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.060785] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.060789] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.060792] pnp 00:00: [mem 0x00100000-0x3fffffff]
[ 0.060795] pnp 00:00: [mem 0xfec00000-0xffffffff]
[ 0.060889] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.060930] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.060970] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.061009] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.061049] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.061088] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.061128] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.061167] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.061206] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.061246] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.061285] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.061325] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.061364] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.061404] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.061445] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.061480] pnp 00:01: [bus 00-ff]
[ 0.061484] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.061487] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.061491] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.061495] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.061499] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.061503] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.061506] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.061510] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.061521] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.061525] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.061529] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.061532] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.061536] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.061540] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.061544] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.061547] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.061551] pnp 00:01: [mem 0x40000000-0xfebfffff window]
[ 0.061608] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.061732] pnp 00:02: [io 0x0010-0x001f]
[ 0.061736] pnp 00:02: [io 0x0090-0x009f]
[ 0.061739] pnp 00:02: [io 0x0024-0x0025]
[ 0.061742] pnp 00:02: [io 0x0028-0x0029]
[ 0.061745] pnp 00:02: [io 0x002c-0x002d]
[ 0.061749] pnp 00:02: [io 0x0030-0x0031]
[ 0.061752] pnp 00:02: [io 0x0034-0x0035]
[ 0.061755] pnp 00:02: [io 0x0038-0x0039]
[ 0.061758] pnp 00:02: [io 0x003c-0x003d]
[ 0.061761] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.061764] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.061767] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.061771] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.061774] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.061777] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.061780] pnp 00:02: [io 0x0050-0x0053]
[ 0.061783] pnp 00:02: [io 0x0072-0x0077]
[ 0.061786] pnp 00:02: [io 0x002e-0x002f]
[ 0.061789] pnp 00:02: [io 0x1000-0x107f]
[ 0.061793] pnp 00:02: [io 0x1180-0x11bf]
[ 0.061796] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.061799] pnp 00:02: [io 0x1600-0x162f]
[ 0.061802] pnp 00:02: [io 0x1632-0x167f]
[ 0.061805] pnp 00:02: [io 0x004e-0x004f]
[ 0.061808] pnp 00:02: [io 0x1630-0x1631]
[ 0.061913] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.061952] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.061990] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.062028] system 00:02: [io 0x1600-0x162f] has been reserved
[ 0.062066] system 00:02: [io 0x1632-0x167f] has been reserved
[ 0.062105] system 00:02: [io 0x1630-0x1631] has been reserved
[ 0.062143] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.062164] pnp 00:03: [io 0x0000-0x000f]
[ 0.062167] pnp 00:03: [io 0x0080-0x008f]
[ 0.062171] pnp 00:03: [io 0x00c0-0x00df]
[ 0.062174] pnp 00:03: [dma 4]
[ 0.062209] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.062223] pnp 00:04: [io 0x0061]
[ 0.062257] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.062270] pnp 00:05: [io 0x00f0]
[ 0.062276] pnp 00:05: [irq 13]
[ 0.062311] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.062325] pnp 00:06: [io 0x0070-0x0071]
[ 0.062328] pnp 00:06: [irq 8]
[ 0.062371] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.062385] pnp 00:07: [io 0x0060]
[ 0.062388] pnp 00:07: [io 0x0064]
[ 0.062391] pnp 00:07: [irq 1]
[ 0.062426] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.062440] pnp 00:08: [irq 12]
[ 0.062476] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.062515] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.062518] pnp 00:09: [io 0x03f7]
[ 0.062522] pnp 00:09: [irq 6]
[ 0.062525] pnp 00:09: [dma 2]
[ 0.062579] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.062686] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.062690] pnp 00:0a: [irq 4]
[ 0.062792] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.062917] pnp 00:0b: [io 0x03bc-0x03be]
[ 0.062921] pnp 00:0b: [irq 7]
[ 0.063014] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.063178] pnp 00:0c: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
[ 0.063244] pnp: PnP ACPI: found 13 devices
[ 0.064009] ACPI: ACPI bus type pnp unregistered
[ 0.064046] PnPBIOS: Disabled by ACPI PNP
[ 0.103652] Switching to clocksource acpi_pm
[ 0.103738] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ 0.103781] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[ 0.103834] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[ 0.103882] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.103919] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.103958] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.103998] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
[ 0.103998] Switched to NOHz mode on CPU #0
[ 0.103998] pci 0000:02:00.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
[ 0.103998] pci 0000:02:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.103998] pci 0000:02:00.1: BAR 15: assigned [mem 0xec000000-0xefffffff pref]
[ 0.103998] pci 0000:02:00.1: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[ 0.103998] pci 0000:02:01.0: BAR 6: assigned [mem 0xc0240000-0xc024ffff pref]
[ 0.103998] pci 0000:02:00.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.103998] pci 0000:02:00.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.103998] pci 0000:02:00.1: BAR 13: assigned [io 0x4800-0x48ff]
[ 0.103998] pci 0000:02:00.1: BAR 14: assigned [io 0x4c00-0x4cff]
[ 0.103998] pci 0000:02:00.0: CardBus bridge to [bus 03-06]
[ 0.103998] pci 0000:02:00.0: bridge window [io 0x4000-0x40ff]
[ 0.103998] pci 0000:02:00.0: bridge window [io 0x4400-0x44ff]
[ 0.103998] pci 0000:02:00.0: bridge window [mem 0xe8000000-0xebffffff pref]
[ 0.103998] pci 0000:02:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.103998] pci 0000:02:00.1: CardBus bridge to [bus 07-07]
[ 0.103998] pci 0000:02:00.1: bridge window [io 0x4800-0x48ff]
[ 0.103998] pci 0000:02:00.1: bridge window [io 0x4c00-0x4cff]
[ 0.103998] pci 0000:02:00.1: bridge window [mem 0xec000000-0xefffffff pref]
[ 0.103998] pci 0000:02:00.1: bridge window [mem 0xc8000000-0xcbffffff]
[ 0.103998] pci 0000:00:1e.0: PCI bridge to [bus 02-08]
[ 0.103998] pci 0000:00:1e.0: bridge window [io 0x4000-0x8fff]
[ 0.103998] pci 0000:00:1e.0: bridge window [mem 0xc0200000-0xcfffffff]
[ 0.103998] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff pref]
[ 0.103998] pci 0000:00:1e.0: setting latency timer to 64
[ 0.103998] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.103998] PCI: setting IRQ 11 as level-triggered
[ 0.103998] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.103998] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.103998] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.103998] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.103998] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.103998] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.103998] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[ 0.103998] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[ 0.103998] pci_bus 0000:02: resource 0 [io 0x4000-0x8fff]
[ 0.103998] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xcfffffff]
[ 0.103998] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xefffffff pref]
[ 0.103998] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.103998] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.103998] pci_bus 0000:03: resource 0 [io 0x4000-0x40ff]
[ 0.103998] pci_bus 0000:03: resource 1 [io 0x4400-0x44ff]
[ 0.103998] pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref]
[ 0.103998] pci_bus 0000:03: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.103998] pci_bus 0000:07: resource 0 [io 0x4800-0x48ff]
[ 0.103998] pci_bus 0000:07: resource 1 [io 0x4c00-0x4cff]
[ 0.103998] pci_bus 0000:07: resource 2 [mem 0xec000000-0xefffffff pref]
[ 0.103998] pci_bus 0000:07: resource 3 [mem 0xc8000000-0xcbffffff]
[ 0.103998] NET: Registered protocol family 2
[ 0.103998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.103998] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.104763] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.105951] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.105992] TCP reno registered
[ 0.106030] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.106104] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.106521] NET: Registered protocol family 1
[ 0.106689] pci 0000:01:00.0: Boot video device
[ 0.106707] PCI: CLS 32 bytes, default 64
[ 0.106797] Unpacking initramfs...
[ 0.550105] Freeing initrd memory: 10836k freed
[ 0.568412] Simple Boot Flag at 0x35 set to 0x1
[ 0.569019] audit: initializing netlink socket (disabled)
[ 0.569081] type=2000 audit(1297688322.567:1): initialized
[ 0.581082] highmem bounce pool size: 64 pages
[ 0.581126] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.584087] VFS: Disk quotas dquot_6.5.2
[ 0.584296] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.584556] msgmni has been set to 1746
[ 0.584899] alg: No test for stdrng (krng)
[ 0.585023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.585072] io scheduler noop registered
[ 0.585106] io scheduler deadline registered
[ 0.585164] io scheduler cfq registered (default)
[ 0.585491] ERST: Table is not found!
[ 0.585540] isapnp: Scanning for PnP cards...
[ 0.938475] isapnp: No Plug & Play device found
[ 0.938622] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.938763] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.939278] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.939455] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.939509] serial 0000:00:1f.6: PCI INT B disabled
[ 0.939691] Linux agpgart interface v0.103
[ 0.939878] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 0.953518] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.953793] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.960073] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960118] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.960309] mousedev: PS/2 mouse device common for all mice
[ 0.960402] rtc_cmos 00:06: RTC can wake from S4
[ 0.960507] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.960561] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.960609] cpuidle: using governor ladder
[ 0.960644] cpuidle: using governor menu
[ 0.961078] TCP cubic registered
[ 0.961364] NET: Registered protocol family 10
[ 0.962391] Mobile IPv6
[ 0.962426] NET: Registered protocol family 17
[ 0.962465] Registering the dns_resolver key type
[ 0.962527] Using IPI No-Shortcut mode
[ 0.962661] PM: Hibernation image not present or could not be loaded.
[ 0.962677] registered taskstats version 1
[ 0.962995] rtc_cmos 00:06: setting system clock to 2011-02-14 12:58:43 UTC (1297688323)
[ 0.963075] Initalizing network drop monitor service
[ 0.963179] Freeing unused kernel memory: 360k freed
[ 0.964289] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.992217] udev[40]: starting version 166
[ 1.253584] Floppy drive(s): fd0 is 1.44M
[ 1.271101] FDC 0 is a National Semiconductor PC87306
[ 1.300159] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.300204] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.300289] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.305194] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.305234] ACPI: Thermal Zone [THM0] (53 C)
[ 1.585748] Refined TSC clocksource calibration: 1694.501 MHz.
[ 1.585795] Switching to clocksource tsc
[ 1.637802] SCSI subsystem initialized
[ 1.644864] usbcore: registered new interface driver usbfs
[ 1.645101] usbcore: registered new interface driver hub
[ 1.652198] usbcore: registered new device driver usb
[ 1.658816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.658902] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.658944] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.659239] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 1.659280] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 1.659356] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.659362] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.659454] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.659538] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.663460] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.684102] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 1.701444] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.731923] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.732041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.732080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.732127] usb usb1: Product: EHCI Host Controller
[ 1.732163] usb usb1: Manufacturer: Linux 2.6.38-rc4-686-iniza ehci_hcd
[ 1.732201] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.732535] hub 1-0:1.0: USB hub found
[ 1.732575] hub 1-0:1.0: 6 ports detected
[ 1.732742] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.732782] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.732828] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.732887] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.732892] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.732940] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.733015] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 1.733095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.733134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.733181] usb usb2: Product: UHCI Host Controller
[ 1.733216] usb usb2: Manufacturer: Linux 2.6.38-rc4-686-iniza uhci_hcd
[ 1.733254] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.733424] hub 2-0:1.0: USB hub found
[ 1.733462] hub 2-0:1.0: 2 ports detected
[ 1.733574] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.733614] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.733897] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.733936] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.733989] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.733993] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.734037] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.734105] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 1.734180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.734219] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.734266] usb usb3: Product: UHCI Host Controller
[ 1.734302] usb usb3: Manufacturer: Linux 2.6.38-rc4-686-iniza uhci_hcd
[ 1.734340] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.734512] hub 3-0:1.0: USB hub found
[ 1.734551] hub 3-0:1.0: 2 ports detected
[ 1.742465] libata version 3.00 loaded.
[ 1.744504] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.744552] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.744611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.744616] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.744663] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.744741] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 1.744828] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.744867] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.744914] usb usb4: Product: UHCI Host Controller
[ 1.744950] usb usb4: Manufacturer: Linux 2.6.38-rc4-686-iniza uhci_hcd
[ 1.744988] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.752219] hub 4-0:1.0: USB hub found
[ 1.752264] hub 4-0:1.0: 2 ports detected
[ 1.764154] ata_piix 0000:00:1f.1: version 2.13
[ 1.764174] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.764227] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.764330] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.766188] scsi0 : ata_piix
[ 1.768534] scsi1 : ata_piix
[ 1.769364] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 1.769404] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 1.805644] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:0d:60:b0:62:87
[ 1.805690] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.924401] ata2.01: NODEV after polling detection
[ 1.933153] ata1.00: HPA detected: current 110257519, native 117210240
[ 1.933222] ata1.00: ATA-6: HTS726060M9AT00, MH4OA6BA, max UDMA/100
[ 1.933260] ata1.00: 110257519 sectors, multi 16: LBA
[ 1.933391] ata2.00: ATAPI: UJDA755yDVD/CDRW, 1.70, max UDMA/33
[ 1.948653] ata2.00: configured for UDMA/33
[ 1.949016] ata1.00: configured for UDMA/100
[ 1.949278] scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5
[ 1.952120] scsi 1:0:0:0: CD-ROM MATSHITA UJDA755yDVD/CDRW 1.70 PQ: 0 ANSI: 5
[ 1.988661] sd 0:0:0:0: [sda] 110257519 512-byte logical blocks: (56.4 GB/52.5 GiB)
[ 1.988790] sd 0:0:0:0: [sda] Write Protect is off
[ 1.988827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.988861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.990585] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.990626] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.991053] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.042063] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.042852] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.062099] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.062809] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.228030] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.404074] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
[ 2.404120] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.404159] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 2.404195] usb 3-1: Manufacturer: Logitech
[ 2.445623] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1
[ 2.445874] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 2.446147] usbcore: registered new interface driver usbhid
[ 2.446184] usbhid: USB HID core driver
[ 2.769353] device-mapper: uevent: version 1.0.3
[ 2.770070] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 3.090989] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.146545] systemd[1]: systemd 17 running in system mode. (+PAM -LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; debian)
[ 4.276352] systemd[1]: Set hostname to <tbox>.
[ 4.276561] IPv4 FIB: Using LC-trie version 0.409
[ 6.346149] cfg80211: Calling CRDA to update world regulatory domain
[ 6.709720] ath5k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 6.709847] ath5k 0000:02:02.0: registered as 'phy0'
[ 6.997820] ath: EEPROM regdomain: 0x61
[ 6.997823] ath: EEPROM indicates we should expect a direct regpair map
[ 6.997830] ath: Country alpha2 being used: 00
[ 6.997832] ath: Regpair used: 0x61
[ 7.213314] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.214216] Registered led device: ath5k-phy0::rx
[ 7.214243] Registered led device: ath5k-phy0::tx
[ 7.214257] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[ 7.214301] ath5k phy0: RF5111 5GHz radio found (0x17)
[ 7.214337] ath5k phy0: RF2111 2GHz radio found (0x23)
[ 8.290921] udev[234]: starting version 166
[ 8.977217] NET: Registered protocol family 23
[ 9.168553] Non-volatile memory driver v1.3
[ 9.178052] intel_rng: FWH not detected
[ 9.434755] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 9.442907] ACPI: Battery Slot [BAT0] (battery present)
[ 9.451919] ACPI: Lid Switch [LID]
[ 9.460279] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 9.460550] ACPI: Sleep Button [SLPB]
[ 9.460752] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.460888] ACPI: Power Button [PWRF]
[ 9.464688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input3
[ 9.464901] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.482642] nsc-ircc 00:0c: [io 0x02f8-0x02ff]
[ 9.482707] nsc-ircc 00:0c: [irq 3]
[ 9.482712] nsc-ircc 00:0c: [dma 1]
[ 9.483182] nsc-ircc 00:0c: activated
[ 9.483389] nsc-ircc, chip->init
[ 9.483430] nsc-ircc, Found chip at base=0x02e
[ 9.483487] nsc-ircc, driver loaded (Dag Brattli)
[ 9.487704] IrDA: Registered device irda0
[ 9.487747] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 9.512756] ACPI: AC Adapter [AC] (on-line)
[ 9.518471] ACPI: acpi_idle registered with cpuidle
[ 9.518957] Marking TSC unstable due to TSC halts in idle
[ 9.528836] Switching to clocksource acpi_pm
[ 9.570200] parport_pc 00:0b: reported by Plug and Play ACPI
[ 9.570285] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 9.572169] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.624871] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.699688] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.837115] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 10.876593] cfg80211: World regulatory domain updated:
[ 10.876639] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.876687] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.876735] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.876782] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.876830] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.876877] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.892307] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0
[ 10.892364] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 10.932811] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 11.007338] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[ 11.007397] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 11.007443] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 11.007484] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[ 11.236921] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
[ 11.236992] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[ 11.237111] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x8fff]
[ 11.237163] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[ 11.254856] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff]
[ 11.254906] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff
[ 11.255088] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref]
[ 11.255138] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff
[ 11.255720] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
[ 11.255774] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[ 11.255821] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[ 11.255861] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
[ 11.448406] systemd-fsck[241]: /dev/sda5: sauber, 144201/640848 Dateien, 1885761/2560351 Blöcke (Prüfung nach 5 Einhängevorgängen)
[ 11.452766] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 11.484920] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
[ 11.484966] yenta_cardbus 0000:02:00.1: Socket status: 30000006
[ 11.485013] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [io 0x4000-0x8fff]
[ 11.485063] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[ 11.501199] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff]
[ 11.501257] pcmcia_socket pcmcia_socket1: cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff
[ 11.501439] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref]
[ 11.501488] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff
[ 11.695487] [drm] Initialized drm 1.1.0
[ 11.844436] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 11.845661] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 11.846261] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 11.846721] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.847214] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 11.847410] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 11.847546] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 11.847686] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[ 11.848395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 11.849634] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 11.850222] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.850681] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.851173] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 11.851369] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 11.851504] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 11.851644] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 11.852524] clean.
[ 12.038481] Adding 1052244k swap on /dev/sda2. Priority:0 extents:1 across:1052244k
[ 12.116895] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 12.116937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 12.116972] thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04
[ 12.117010] thinkpad_acpi: IBM ThinkPad T40p, model 2374SG6
[ 12.118985] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 12.127317] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 12.128250] Registered led device: tpacpi::thinklight
[ 12.128565] Registered led device: tpacpi::power
[ 12.128858] Registered led device: tpacpi::standby
[ 12.134329] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 12.138218] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 12.431216] radeon: Unknown parameter `modeset'
[ 12.599562] systemd-fsck[569]: /dev/sda3: sauber, 150712/640848 Dateien, 2388150/2560359 Blöcke
[ 12.664108] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 12.664232] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 12.665911] snd_intel8x0m: Unknown parameter `index'
[ 12.857376] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: mblk_io_submit
[ 13.230797] fuse init (API version 7.16)
[ 13.588040] intel8x0_measure_ac97_clock: measured 55388 usecs (2668 samples)
[ 13.588085] intel8x0: clocking to 48000
[ 14.474323] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.744364] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 16.968551] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 18.025308] P-state transition latency capped at 20 uS
[ 18.713660] lp0: using parport0 (interrupt-driven).
[ 18.976138] ppdev: user-space parallel port driver
[ 19.641048] Bluetooth: Core ver 2.15
[ 19.641123] NET: Registered protocol family 31
[ 19.641158] Bluetooth: HCI device and connection manager initialized
[ 19.641196] Bluetooth: HCI socket layer initialized
[ 19.817421] wpa_supplicant[801]: Trying to associate with 00:04:0e:e4:00:3d (SSID='myCastle-WLAN WPA (Wireless LAN)' freq=2442 MHz)
[ 19.825088] wlan0: authenticate with 00:04:0e:e4:00:3d (try 1)
[ 19.826821] wlan0: authenticated
[ 19.826888] wlan0: associate with 00:04:0e:e4:00:3d (try 1)
[ 19.831687] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 19.831698] wlan0: associated
[ 19.833816] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.835637] wpa_supplicant[801]: Associated with 00:04:0e:e4:00:3d
[ 20.068062] Bluetooth: L2CAP socket layer initialized
[ 20.068165] Bluetooth: L2CAP ver 2.15
[ 20.068201] Bluetooth: L2CAP socket layer initialized
[ 20.168528] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.168584] Bluetooth: BNEP filters: protocol multicast
[ 20.176944] Bluetooth: RFCOMM TTY layer initialized
[ 20.176988] Bluetooth: RFCOMM socket layer initialized
[ 20.177024] Bluetooth: RFCOMM ver 1.11
[ 21.224395] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.224450] Bluetooth: SCO socket layer initialized
[ 21.239442] padlock_aes: VIA PadLock not detected.
[ 21.245666] wpa_supplicant[801]: WPA: Key negotiation completed with 00:04:0e:e4:00:3d [PTK=CCMP GTK=TKIP]
[ 21.245842] wpa_supplicant[801]: CTRL-EVENT-CONNECTED - Connection to 00:04:0e:e4:00:3d completed (auth) [id=0 id_str=]
[ 30.600045] wlan0: no IPv6 routers present
[ 37.208114] pci 0000:01:00.0: power state changed by ACPI to D0
[ 37.208120] pci 0000:01:00.0: power state changed by ACPI to D0
[ 37.208129] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 37.311333] radeon: Unknown parameter `modeset'
[ 47.583397] start_kdeinit (1242): /proc/1244/oom_adj is deprecated, please use /proc/1244/oom_score_adj instead.
[ 54.468936] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 54.684612] EXT4-fs (sda3): re-mounted. Opts: mblk_io_submit,commit=0
[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2011-02-14 13:17    [W:0.093 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site