lkml.org 
[lkml]   [2010]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: via 8237 sata errors
Date
On May 30, 2010, Thomas Fjellstrom wrote:
> On May 30, 2010, Robert Hancock wrote:
> > On Sun, May 30, 2010 at 1:33 PM, Thomas Fjellstrom
> >
> > <tfjellstrom@strangesoft.net> wrote:
> > > On May 30, 2010, Thomas Fjellstrom wrote:
> > >> On May 30, 2010, Robert Hancock wrote:
> > >> > On 05/29/2010 08:46 PM, Thomas Fjellstrom wrote:
> > >> > > I'm getting a rather nasty set of messages from dmesg when
> > >> > > trying to use a couple SATA II WD 2TB Green drives with an
> > >> > > older system (via 8237 based). They seem to work fine on a
> > >> > > newer p35 based system.
> > >> >
> > >> > ..
> > >> >
> > >> > > [ 283.308963] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0
> > >> > > action 0x0 [ 283.309007] ata2.00: BMDMA stat 0x4
> > >> > > [ 283.309045] ata2.00: failed command: READ DMA
> > >> > > [ 283.309089] ata2.00: cmd c8/00:08:08:08:30/00:00:00:00:00/e0
> > >> > > tag 0 dma 4096 in [ 283.309091] res
> > >> > > 41/04:00:08:08:30/00:00:00:00:00/e0 Emask 0x1 (device error) [
> > >> > > 283.309171] ata2.00: status: { DRDY ERR }
> > >> > > [ 283.309207] ata2.00: error: { ABRT }
> > >> > > [ 283.324886] ata2.00: configured for UDMA/133
> > >> > > [ 283.324904] ata2: EH complete
> > >> >
> > >> > It's not really clear why the drive is returning command aborted
> > >> > on a read, there's no other error bits to indicate an
> > >> > uncorrectable error or a CRC error. Is it only the one drive
> > >> > that's giving the errors?
> > >>
> > >> I'm not entirely sure if its the same drive each time. I can make
> > >> sure today. The fun part is it works fine in a different machine.
> > >> Where as it will start erroring out like that almost right away in
> > >> the via based machine. When its doing that, its also making some
> > >> fairly scary (for a hard drive) noises, but since it doesn't do
> > >> that in the p35 machine I'm really hoping it isn't the drive.
> > >
> > > I've started up a dd on each drive, just for kicks, and reading from
> > > both of them at the same time seems to work fine on the via chipset.
> > > Given this little tid-bit, it seems its only once md-raid is setup on
> > > the drives does one of them freak out.
> >
> > If the problem happens mostly when both drives are in use then it
> > could be a power supply issue. Some drives are rather sensitive to
> > power fluctuations. You could try and move the drives to separate
> > power cables if they're on the same one, or maybe the power supply's
> > just not up to snuff.
>
> I'll give that a shot too. But I have dd running on both drives right now
> (dd if=/dev/sdX of=/dev/null), and its running fine. I'm also going to
> run some other tests, see if maybe there isn't a ram problem, it could
> be the cause.

Interesting, after moving each WD drive to its own power cable, that
particular problem seems to have gone away. However another problem seems to
have popped up, which I'm not sure is related so I'll post another thread
(unable to handle kernel paging request).

> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> > in the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/


--
Thomas Fjellstrom
tfjellstrom@strangesoft.net


\
 
 \ /
  Last update: 2010-05-31 03:21    [W:0.051 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site