lkml.org 
[lkml]   [2010]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: via 8237 sata errors
Date
On May 30, 2010, Robert Hancock wrote:
> On Sun, May 30, 2010 at 1:33 PM, Thomas Fjellstrom
>
> <tfjellstrom@strangesoft.net> wrote:
> > On May 30, 2010, Thomas Fjellstrom wrote:
> >> On May 30, 2010, Robert Hancock wrote:
> >> > On 05/29/2010 08:46 PM, Thomas Fjellstrom wrote:
> >> > > I'm getting a rather nasty set of messages from dmesg when trying
> >> > > to use a couple SATA II WD 2TB Green drives with an older system
> >> > > (via 8237 based). They seem to work fine on a newer p35 based
> >> > > system.
> >> >
> >> > ..
> >> >
> >> > > [ 283.308963] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0
> >> > > action 0x0 [ 283.309007] ata2.00: BMDMA stat 0x4
> >> > > [ 283.309045] ata2.00: failed command: READ DMA
> >> > > [ 283.309089] ata2.00: cmd c8/00:08:08:08:30/00:00:00:00:00/e0
> >> > > tag 0 dma 4096 in [ 283.309091] res
> >> > > 41/04:00:08:08:30/00:00:00:00:00/e0 Emask 0x1 (device error) [
> >> > > 283.309171] ata2.00: status: { DRDY ERR }
> >> > > [ 283.309207] ata2.00: error: { ABRT }
> >> > > [ 283.324886] ata2.00: configured for UDMA/133
> >> > > [ 283.324904] ata2: EH complete
> >> >
> >> > It's not really clear why the drive is returning command aborted on
> >> > a read, there's no other error bits to indicate an uncorrectable
> >> > error or a CRC error. Is it only the one drive that's giving the
> >> > errors?
> >>
> >> I'm not entirely sure if its the same drive each time. I can make sure
> >> today. The fun part is it works fine in a different machine. Where as
> >> it will start erroring out like that almost right away in the via
> >> based machine. When its doing that, its also making some fairly scary
> >> (for a hard drive) noises, but since it doesn't do that in the p35
> >> machine I'm really hoping it isn't the drive.
> >
> > I've started up a dd on each drive, just for kicks, and reading from
> > both of them at the same time seems to work fine on the via chipset.
> > Given this little tid-bit, it seems its only once md-raid is setup on
> > the drives does one of them freak out.
>
> If the problem happens mostly when both drives are in use then it
> could be a power supply issue. Some drives are rather sensitive to
> power fluctuations. You could try and move the drives to separate
> power cables if they're on the same one, or maybe the power supply's
> just not up to snuff.

I'll give that a shot too. But I have dd running on both drives right now
(dd if=/dev/sdX of=/dev/null), and its running fine. I'm also going to run
some other tests, see if maybe there isn't a ram problem, it could be the
cause.

> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> in the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


--
Thomas Fjellstrom
tfjellstrom@strangesoft.net


\
 
 \ /
  Last update: 2010-05-30 21:51    [W:0.050 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site