lkml.org 
[lkml]   [2010]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 15/20] mach-ux500: add touchscreen interfaces platform data
Date
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
---
arch/arm/mach-ux500/Makefile | 1 +
arch/arm/mach-ux500/board-mop500-touchscreen.c | 170 ++++++++++++++++++++++++
arch/arm/mach-ux500/board-mop500.c | 6 +-
arch/arm/mach-ux500/board-mop500.h | 2 +-
4 files changed, 177 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-ux500/board-mop500-touchscreen.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index e1d3822..e2af105 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o
obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o
obj-$(CONFIG_U5500_MBOX) += mbox.o
obj-$(CONFIG_INPUT_KEYBOARD) += board-mop500-keypads.o
+obj-$(CONFIG_INPUT_TOUCHSCREEN) += board-mop500-touchscreen.o
diff --git a/arch/arm/mach-ux500/board-mop500-touchscreen.c b/arch/arm/mach-ux500/board-mop500-touchscreen.c
new file mode 100644
index 0000000..87cf2ac
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-touchscreen.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com>
+ *
+ * Touchscreen interfaces for various boards
+ */
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/input/bu21013.h>
+#include <../drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h>
+
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+/*
+ * Synaptics RMI4 touchscreen interface on the NUIBs
+ */
+
+/*
+ * Descriptor structure.
+ * Describes the number of i2c devices on the bus that speak RMI.
+ */
+static struct synaptics_rmi4_platform_data rmi4_i2c_dev_platformdata = {
+ .name = "synaptics_rmi4_i2c0",
+ .irq_number = NOMADIK_GPIO_TO_IRQ(84),
+ .irq_type = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
+ .x_flip = true,
+ .y_flip = false,
+ .regulator_en = true,
+};
+
+static struct i2c_board_info __initdata u8500_i2c3_devices_nuib[] = {
+ {
+ I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
+ .platform_data = &rmi4_i2c_dev_platformdata,
+ },
+};
+
+/*
+ * BU21013 ROHM touchscreen interface on the STUIBs
+ */
+
+/* tracks number of bu21013 devices being enabled */
+static int bu21013_devices;
+
+#define TOUCH_GPIO_PIN 84
+
+#define TOUCH_XMAX 384
+#define TOUCH_YMAX 704
+
+#define PRCMU_CLOCK_OCR 0x1CC
+#define TSC_EXT_CLOCK_9_6MHZ 0x840000
+
+/**
+ * bu21013_gpio_board_init : configures the touch panel.
+ * @reset_pin: reset pin number
+ * This function can be used to configures
+ * the voltage and reset the touch panel controller.
+ */
+static int bu21013_gpio_board_init(int reset_pin)
+{
+ int retval = 0;
+
+ bu21013_devices++;
+ if (bu21013_devices == 1) {
+ retval = gpio_request(reset_pin, "touchp_reset");
+ if (retval) {
+ printk(KERN_ERR "Unable to request gpio reset_pin");
+ return retval;
+ }
+ retval = gpio_direction_output(reset_pin, 1);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: gpio direction failed\n",
+ __func__);
+ return retval;
+ }
+ gpio_set_value(reset_pin, 1);
+ }
+
+ return retval;
+}
+
+/**
+ * bu21013_gpio_board_exit : deconfigures the touch panel controller
+ * @reset_pin: reset pin number
+ * This function can be used to deconfigures the chip selection
+ * for touch panel controller.
+ */
+static int bu21013_gpio_board_exit(int reset_pin)
+{
+ int retval = 0;
+
+ if (bu21013_devices == 1) {
+ retval = gpio_direction_output(reset_pin, 0);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: gpio direction failed\n",
+ __func__);
+ return retval;
+ }
+ gpio_set_value(reset_pin, 0);
+ }
+ bu21013_devices--;
+
+ return retval;
+}
+
+/**
+ * bu21013_read_pin_val : get the interrupt pin value
+ * This function can be used to get the interrupt pin value for touch panel
+ * controller.
+ */
+static int bu21013_read_pin_val(void)
+{
+ return gpio_get_value(TOUCH_GPIO_PIN);
+}
+
+static struct bu21013_platform_device tsc_plat_device = {
+ .cs_en = bu21013_gpio_board_init,
+ .cs_dis = bu21013_gpio_board_exit,
+ .irq_read_val = bu21013_read_pin_val,
+ .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+ .cs_pin = EGPIO_PIN_13,
+ .x_max_res = 480,
+ .y_max_res = 864,
+ .touch_x_max = TOUCH_XMAX,
+ .touch_y_max = TOUCH_YMAX,
+ .ext_clk = true,
+ .x_flip = true,
+ .y_flip = false,
+};
+
+static struct bu21013_platform_device tsc_cntl2_plat_device = {
+ .cs_en = bu21013_gpio_board_init,
+ .cs_dis = bu21013_gpio_board_exit,
+ .irq_read_val = bu21013_read_pin_val,
+ .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+ .cs_pin = EGPIO_PIN_13,
+ .x_max_res = 480,
+ .y_max_res = 864,
+ .touch_x_max = TOUCH_XMAX,
+ .touch_y_max = TOUCH_YMAX,
+ .ext_clk = true,
+ .x_flip = true,
+ .y_flip = false,
+};
+
+static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("bu21013_ts", 0x5C),
+ .platform_data = &tsc_plat_device,
+ },
+ {
+ I2C_BOARD_INFO("bu21013_ts", 0x5D),
+ .platform_data = &tsc_cntl2_plat_device,
+ },
+};
+
+void mop500_touchpanel_init(void)
+{
+ i2c_register_board_info(3, u8500_i2c3_devices_nuib,
+ ARRAY_SIZE(u8500_i2c3_devices_nuib));
+
+ i2c_register_board_info(3, u8500_i2c3_devices_stuib,
+ ARRAY_SIZE(u8500_i2c3_devices_stuib));
+}
+
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 703840b..63313c4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -202,8 +202,12 @@ static void __init u8500_init_machine(void)
mop500_spi_init();
mop500_uart_init();

+#ifdef CONFIG_INPUT_KEYBOARD
mop500_keypad_init();
-
+#endif
+#ifdef CONFIG_INPUT_TOUCHSCREEN
+ mop500_touchpanel_init();
+#endif
platform_device_register(&ab8500_device);

i2c_register_board_info(0, mop500_i2c0_devices,
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 3104ae2..bac81c5 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -17,5 +17,5 @@
extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
extern void mop500_keypad_init(void);
-
+extern void mop500_touchpanel_init(void);
#endif
--
1.7.2.dirty


\
 
 \ /
  Last update: 2010-12-03 16:35    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site