lkml.org 
[lkml]   [2010]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/4] vgaarb: Fix VGA Arbiter to accept PCI Domains other than 0
Update the VGA Arbiter to accept PCI Domains other than 0.

Signed-off-by: Mike Travis <travis@sgi.com>

Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Chiang <achiang@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Robin Holt <holt@sgi.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Adam Jackson <ajax@nwnk.net>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gaetan Nadon <memsize@videotron.ca>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Tiago Vignatti <tiago.vignatti@nokia.com>
Cc: Cliff Wickman <cpw@sgi.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Christian Zander <chzander@nvidia.com>
Cc: Yu Zhao <yu.zhao@intel.com>

Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: x86@kernel.org
---
drivers/gpu/vga/vgaarb.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)

--- linux.orig/drivers/gpu/vga/vgaarb.c
+++ linux/drivers/gpu/vga/vgaarb.c
@@ -954,6 +954,7 @@
}

} else if (strncmp(curr_pos, "target ", 7) == 0) {
+ struct pci_bus *pbus;
unsigned int domain, bus, devfn;
struct vga_device *vgadev;

@@ -969,18 +970,31 @@
ret_val = -EPROTO;
goto done;
}
+ pr_devel("vgaarb: %s ==> %x:%x:%x.%x\n", curr_pos,
+ domain, bus, PCI_SLOT(devfn), PCI_FUNC(devfn));

- pdev = pci_get_bus_and_slot(bus, devfn);
+ pbus = pci_find_bus(domain, bus);
+ pr_devel("vgaarb: pbus %p\n", pbus);
+ if (pbus == NULL) {
+ pr_err("vgaarb: invalid PCI domain and/or bus address %x:%x\n",
+ domain, bus);
+ ret_val = -ENODEV;
+ goto done;
+ }
+ pdev = pci_get_slot(pbus, devfn);
+ pr_devel("vgaarb: pdev %p\n", pdev);
if (!pdev) {
- pr_info("vgaarb: invalid PCI address!\n");
+ pr_err("vgaarb: invalid PCI address %x:%x\n",
+ bus, devfn);
ret_val = -ENODEV;
goto done;
}
}

vgadev = vgadev_find(pdev);
+ pr_devel("vgaarb: vgadev %p\n", vgadev);
if (vgadev == NULL) {
- pr_info("vgaarb: this pci device is not a vga device\n");
+ pr_err("vgaarb: this pci device is not a vga device\n");
pci_dev_put(pdev);
ret_val = -ENODEV;
goto done;
@@ -998,7 +1012,8 @@
}
}
if (i == MAX_USER_CARDS) {
- pr_err("vgaarb: maximum user cards number reached!\n");
+ pr_err("vgaarb: maximum user cards (%d) number reached!\n",
+ MAX_USER_CARDS);
pci_dev_put(pdev);
/* XXX: which value to return? */
ret_val = -ENOMEM;
--


\
 
 \ /
  Last update: 2010-01-18 19:37    [W:0.320 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site