lkml.org 
[lkml]   [2010]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: sata_nv times out for BD-ROM iHOS104-08
2009/12/24 Tejun Heo <tj@kernel.org>:
> I don't think the controller has anything to do with the issue but
> just in case can you please try it with a different controller?

I tried the iHOS BD-ROM with a VIA VT6412 SATA controller today and it worked:

snippet from dmesg:
---
sata_via 0000:06:06.0: version 2.4
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
sata_via 0000:06:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
sata_via 0000:06:06.0: routed to hard irq line 5
scsi0 : sata_via
PM: Adding info for scsi:host0
PM: Adding info for No Bus:host0
scsi1 : sata_via
PM: Adding info for scsi:host1
PM: Adding info for No Bus:host1
scsi2 : sata_via
PM: Adding info for scsi:host2
PM: Adding info for No Bus:host2
ata1: SATA max UDMA/133 port i16@0x9000 bmdma 0xa000 irq 16
ata2: SATA max UDMA/133 port i16@0x9400 bmdma 0xa008 irq 16
ata3: PATA max UDMA/133 port i16@0x9800 bmdma 0xa010 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM ATAPI iHOS104 WL08 PQ: 0 ANSI: 5
---

output of lsscsi:
---
[0:0:0:0] cd/dvd ATAPI iHOS104 WL08 /dev/sr0
---

I also tried my sata_nv with a 64-bit kernel 2.6.22-3-amd64. I got
these messages where it looks like ata3 is finally reset and set at a
UDMA/66, but I don't get the drive recognized afterwards:

dmesg:
---
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: limiting speed to UDMA/66:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/66
ata3: EH complete
hdc: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
---

I contacted LiteON technical support in the meantime, but they are no
help. They said they tested with one Linux system and it worked.

I will probably buy one of the above VIA cards and use it for this drive.

Thanks for helping!
--
Cengiz


\
 
 \ /
  Last update: 2010-01-16 22:37    [W:0.084 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site