lkml.org 
[lkml]   [2009]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectsata_nv times out for BD-ROM iHOS104-08
Hello,

I recently got the iHOS-104-08 Blu-ray reader from LiteOn after hearing
customer reviews and a company statement that it works in Linux, but it
just doesn't work on my hardware combination. I saw previous posts here
and elsewhere on sata_nv specific problems, so I hope you can help me, or
at least I can report this properly for future fixes.

I have an ASUS P5NSLI motherboard with a Core2Duo E6400 CPU and a Nvidia
MCP51 SATA controller (rev a1). On this, I have two other SATA disks (in
Nvidia RAID0 configuration) that I boot from both in Linux and Windows and
I have been using this computer for several years without problems. The
LiteOn BD-ROM is attached to the 3rd SATA port (RAID disabled in BIOS) and
I was able to read DVDs on Windows XP. In Linux, with the latest stable
kernel 2.6.32 (note I'm running a 32-bit linux on 64-bit machine for
historical reasons), this is what I get at boot time:

# dmesg | grep ata3
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 20
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata3.00: configured for UDMA/100
ata3.00: qc timeout (cmd 0xa0)
ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3.00: qc timeout (cmd 0xa0)
ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
ata3: limiting SATA link speed to 1.5 Gbps
ata3.00: limiting speed to UDMA/100:PIO3
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3.00: qc timeout (cmd 0xa0)
ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
ata3.00: disabled
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: EH complete

In the end the device does not appear in my SCSI device list (see output
of lsscsi below) and I cannot access it. Curiously, I get 0 interrupts
from this SATA controller (see /proc/interrupts at bottom of email).

I tried playing with both sata_nv options, such as ADMA, MSI and SWNCQ. I
learned from posts here that MCP51 doesn't have support for ADMA, but
either way the messages I get did not change. I also failed to force DMA
and speed selection behavior using libata.dma and libata.force on the
kernel command-line. I wasn't able to influence sata_nv's decisions any
bit. "acpi=off noapic" and "acpi_use_time_override" also did not help. I
have a working HPET timer in the BIOS.

I was unable to get another driver like the SATA AHCI or one of the PATA
drivers to take over this device. Is that even possible?

I would appreciate any suggestions and would happily debug this a little
further. And, of course, happy holidays everybody. Details of my
configuration follow.
--
Cengiz Gunay

SYSTEM DETAILS:
---------------------------------
I have a Debian unstable/experimental system:
# uname -a
Linux salon 2.6.32 #1 SMP PREEMPT Mon Dec 21 10:40:35 EST 2009 i686
GNU/Linux

Dmesg snippet (full listing attached) showing sata_nv initialization and
irq assignment:
--
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) ->
IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi1 : sata_nv
PM: Adding info for scsi:host1
PM: Adding info for No Bus:host1
scsi2 : sata_nv
PM: Adding info for scsi:host2
PM: Adding info for No Bus:host2
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) ->
IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi3 : sata_nv
PM: Adding info for scsi:host3
PM: Adding info for No Bus:host3
scsi4 : sata_nv
PM: Adding info for scsi:host4
PM: Adding info for No Bus:host4
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 20
--

# lsscsi
[0:0:0:0] disk Generic USB SD Reader 1.00 /dev/sdc
[0:0:0:1] disk Generic USB CF Reader 1.01 /dev/sdd
[0:0:0:2] disk Generic USB SM Reader 1.02 /dev/sde
[0:0:0:3] disk Generic USB MS Reader 1.03 /dev/sdf
[1:0:0:0] disk ATA SAMSUNG SP2504C VT10 /dev/sda
[2:0:0:0] disk ATA ST3250620AS 3.AA /dev/sdb
[5:0:0:0] disk USB DISK 2.0 0403 /dev/sdg

I get 0 interrupts from IRQ 20 assigned to 2nd SATA channel (ata3 and
ata4).
# cat /proc/interrupts
CPU0 CPU1
0: 144 0 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
15: 6483 0 IO-APIC-edge ide0
16: 147431 0 IO-APIC-fasteoi ohci1394, nvidia
17: 95671 0 IO-APIC-fasteoi eth1
20: 6 0 IO-APIC-fasteoi sata_nv
21: 53915 0 IO-APIC-fasteoi sata_nv
22: 67354 0 IO-APIC-fasteoi ehci_hcd:usb2
23: 633 0 IO-APIC-fasteoi ohci_hcd:usb1, HDA Intel
NMI: 0 0 Non-maskable interrupts
LOC: 2572087 2602175 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 32606 35770 Rescheduling interrupts
CAL: 349 609 Function call interrupts
TLB: 2548 3449 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 8 8 Machine check polls
ERR: 1
MIS: 0

# lspci (full "lspci -vv" attached)
00:00.0 Host bridge: nVidia Corporation Device 0071 (rev a3)
00:00.1 RAM memory: nVidia Corporation Device 007f (rev a1)
00:00.2 RAM memory: nVidia Corporation Device 0075 (rev a1)
00:00.3 RAM memory: nVidia Corporation Device 006f (rev a1)
00:00.4 RAM memory: nVidia Corporation Device 00b4 (rev a1)
00:01.0 RAM memory: nVidia Corporation Device 0076 (rev a1)
00:01.1 RAM memory: nVidia Corporation Device 0078 (rev a1)
00:01.2 RAM memory: nVidia Corporation Device 0079 (rev a1)
00:01.3 RAM memory: nVidia Corporation Device 007a (rev a1)
00:01.4 RAM memory: nVidia Corporation Device 007b (rev a1)
00:01.5 RAM memory: nVidia Corporation Device 007c (rev a1)
00:01.6 RAM memory: nVidia Corporation Device 007d (rev a1)
00:02.0 PCI bridge: nVidia Corporation Device 007e (rev a2)
00:04.0 PCI bridge: nVidia Corporation Device 007e (rev a2)
00:05.0 PCI bridge: nVidia Corporation Device 007e (rev a2)
00:06.0 PCI bridge: nVidia Corporation Device 007e (rev a2)
00:07.0 PCI bridge: nVidia Corporation Device 007e (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 RAID bus controller: nVidia Corporation MCP51 Serial ATA
Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev
a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev
a2)
01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900
GT/GTO] (rev a1)
06:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller (rev 46)
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)

# lspci -vv -s 00:0f.0 (full "lspci -vv" attached)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev
a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: Memory at d5005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv

# lspci -vv -s 00:0e.0
00:0e.0 RAID bus controller: nVidia Corporation MCP51 Serial ATA
Controller (rev a1) (prog-if 85)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nvLinux version 2.6.32 (root@salon) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP PREEMPT Mon Dec 21 10:40:35 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7fef0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 36bb4000 - 37fef756
Allocated new RAMDISK: 013e6000 - 02821756
Move RAMDISK from 0000000036bb4000 - 0000000037fef755 to 013e6000 - 02821755
ACPI: RSDP 000f7900 00024 (v02 Nvidia)
ACPI: XSDT 7fef30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 7fefa600 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 7fef3240 07354 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 7fef0000 00040
ACPI: HPET 7fefa840 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 7fefa8c0 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 7fefa740 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 7fefae20 0032C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
1158MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00013de7c4] TEXT DATA BSS ==> [0001000000 - 00013de7c4]
#4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000]
#5 [00013df000 - 00013e5149] BRK ==> [00013df000 - 00013e5149]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [00013e6000 - 0002821756] NEW RAMDISK ==> [00013e6000 - 0002821756]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f5d50] f5d50
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x0007fef0
On node 0 totalpages: 523900
free_area_init_node: node 0, pgdat c1324fc0, node_mem_map c2823200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3948 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2318 pages used for memmap
HighMem zone: 294372 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @c3c00000 s23512 r0 d21544 u1048576
pcpu-alloc: s23512 r0 d21544 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519806
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32 root=/dev/mapper/nvidia_ceebaiib1 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007fef0)
Memory: 2052264k/2096064k available (2319k kernel code, 42132k reserved, 912k data, 404k init, 1186760k highmem)
virtual kernel memory layout:
fixmap : 0xfff6b000 - 0xfffff000 ( 592 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1329000 - 0xc138e000 ( 404 kB)
.data : 0xc1243e41 - 0xc1328128 ( 912 kB)
.text : 0xc1000000 - 0xc1243e41 (2319 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:384
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2133.579 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4267.15 BogoMIPS (lpj=2133579)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4266.83 BogoMIPS (lpj=2133419)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8533.99 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
PM: Adding info for No Bus:platform
Time: 9:28:46 Date: 12/22/09
NET: Registered protocol family 16
PM: Adding info for No Bus:vtcon0
EISA bus registered
ACPI: bus type pci registered
PM: Adding info for No Bus:id
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
PM: Adding info for No Bus:default
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:LNXSYSTM:00
PM: Adding info for acpi:LNXCPU:00
PM: Adding info for acpi:LNXCPU:01
PM: Adding info for acpi:LNXCPU:02
PM: Adding info for acpi:LNXCPU:03
PM: Adding info for acpi:LNXSYBUS:00
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:device:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:device:17
PM: Adding info for acpi:device:18
PM: Adding info for acpi:device:19
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0103:00
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0800:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:device:1a
PM: Adding info for acpi:device:1b
PM: Adding info for acpi:device:1c
PM: Adding info for acpi:device:1d
PM: Adding info for acpi:device:1e
PM: Adding info for acpi:device:1f
PM: Adding info for acpi:NVRAIDBUS:00
PM: Adding info for acpi:ATK0110:00
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:PNP0C0F:08
PM: Adding info for acpi:PNP0C0F:09
PM: Adding info for acpi:PNP0C0F:0a
PM: Adding info for acpi:PNP0C0F:0b
PM: Adding info for acpi:PNP0C0F:0c
PM: Adding info for acpi:PNP0C0F:0d
PM: Adding info for acpi:PNP0C0F:0e
PM: Adding info for acpi:PNP0C0F:0f
PM: Adding info for acpi:PNP0C0F:10
PM: Adding info for acpi:PNP0C0F:11
PM: Adding info for acpi:PNP0C0F:12
PM: Adding info for acpi:PNP0C0F:13
PM: Adding info for acpi:PNP0C0F:14
PM: Adding info for acpi:PNP0C0F:15
PM: Adding info for acpi:PNP0C0F:16
PM: Adding info for acpi:PNP0C0F:17
PM: Adding info for acpi:PNP0C0F:18
PM: Adding info for acpi:PNP0C0F:19
PM: Adding info for acpi:PNP0C0F:1a
PM: Adding info for acpi:PNP0C0F:1b
PM: Adding info for acpi:PNP0C0F:1c
PM: Adding info for acpi:PNP0C0F:1d
PM: Adding info for acpi:PNP0C0F:1e
PM: Adding info for acpi:PNP0C0F:1f
PM: Adding info for acpi:PNP0C0F:20
PM: Adding info for acpi:PNP0C0F:21
PM: Adding info for acpi:PNP0C0F:22
PM: Adding info for acpi:PNP0C0F:23
PM: Adding info for acpi:PNP0C0F:24
PM: Adding info for acpi:PNP0C0F:25
PM: Adding info for acpi:PNP0C0F:26
PM: Adding info for acpi:PNP0C0F:27
PM: Adding info for acpi:PNP0C0F:28
PM: Adding info for acpi:PNP0C02:02
PM: Adding info for acpi:PNP0C01:00
PM: Adding info for acpi:LNXTHERM:00
PM: Adding info for acpi:PNP0C0B:00
PM: Adding info for acpi:LNXTHERM:01
PM: Adding info for acpi:LNXPWRBN:00
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for No Bus:0000:00
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f]
pci 0000:00:0a.1: reg 24 io port: [0x5100-0x513f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: reg 10 32bit mmio: [0xd5006000-0xd5006fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10 32bit mmio: [0xd5007000-0xd50070ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
pci 0000:00:0e.0: reg 20 io port: [0xd400-0xd40f]
pci 0000:00:0e.0: reg 24 32bit mmio: [0xd5004000-0xd5004fff]
pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
pci 0000:00:0f.0: reg 20 io port: [0xe800-0xe80f]
pci 0000:00:0f.0: reg 24 32bit mmio: [0xd5005000-0xd5005fff]
pci 0000:00:10.1: reg 10 32bit mmio: [0xd5000000-0xd5003fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd0ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xd1000000-0xd1ffffff]
pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd2000000-0xd201ffff]
pci 0000:00:02.0: bridge io port: [0xa000-0xafff]
pci 0000:00:02.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:06:06.0: reg 10 32bit mmio: [0xd4001000-0xd40017ff]
pci 0000:06:06.0: reg 14 io port: [0xb000-0xb07f]
pci 0000:06:06.0: supports D2
pci 0000:06:06.0: PME# supported from D2 D3hot D3cold
pci 0000:06:06.0: PME# disabled
pci 0000:06:07.0: reg 10 io port: [0xb400-0xb4ff]
pci 0000:06:07.0: reg 14 32bit mmio: [0xd4000000-0xd40000ff]
pci 0000:06:07.0: reg 30 32bit mmio pref: [0xd3000000-0xd301ffff]
pci 0000:06:07.0: supports D1 D2
pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:07.0: PME# disabled
pci 0000:00:10.0: transparent bridge
pci 0000:00:10.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:10.0: bridge 32bit mmio: [0xd3000000-0xd4ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:00.1
PM: Adding info for pci:0000:00:00.2
PM: Adding info for pci:0000:00:00.3
PM: Adding info for pci:0000:00:00.4
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:01.1
PM: Adding info for pci:0000:00:01.2
PM: Adding info for pci:0000:00:01.3
PM: Adding info for pci:0000:00:01.4
PM: Adding info for pci:0000:00:01.5
PM: Adding info for pci:0000:00:01.6
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:04.0
PM: Adding info for pci:0000:00:05.0
PM: Adding info for pci:0000:00:06.0
PM: Adding info for pci:0000:00:07.0
PM: Adding info for pci:0000:00:09.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0a.1
PM: Adding info for pci:0000:00:0a.2
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:0b.1
PM: Adding info for pci:0000:00:0d.0
PM: Adding info for pci:0000:00:0e.0
PM: Adding info for pci:0000:00:0f.0
PM: Adding info for pci:0000:00:10.0
PM: Adding info for pci:0000:00:10.1
PM: Adding info for pci:0000:01:00.0
PM: Adding info for No Bus:0000:01
PM: Adding info for No Bus:0000:02
PM: Adding info for No Bus:0000:03
PM: Adding info for No Bus:0000:04
PM: Adding info for No Bus:0000:05
PM: Adding info for pci:0000:06:06.0
PM: Adding info for pci:0000:06:07.0
PM: Adding info for No Bus:0000:06
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
PM: Adding info for No Bus:vga_arbiter
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PM: Adding info for No Bus:lo
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:02: ioport range 0x880-0x88f has been reserved
system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0xdbc00-0xdbfff has been reserved
system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
system 00:09: iomem range 0xfc000-0xfffff could not be reserved
system 00:09: iomem range 0xfeff0000-0xfeff00ff has been reserved
system 00:09: iomem range 0x7fef0000-0x7fefffff could not be reserved
system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0x100000-0x7feeffff could not be reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: iomem range 0xfeff0000-0xfeff03ff could not be reserved
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
pci 0000:06:07.0: BAR 6: address space collision on of device [0xd3000000-0xd301ffff]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xa000-0xafff
pci 0000:00:02.0: MEM window: 0xd0000000-0xd2ffffff
pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:04
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: disabled
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:05
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:10.0: PCI bridge, secondary bus 0000:06
pci 0000:00:10.0: IO window: 0xb000-0xbfff
pci 0000:00:10.0: MEM window: 0xd3000000-0xd4ffffff
pci 0000:00:10.0: PREFETCH window: 0x80000000-0x800fffff
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:06: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:06: resource 1 mem: [0xd3000000-0xd4ffffff]
pci_bus 0000:06: resource 2 pref mem [0x80000000-0x800fffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20717k freed
PM: Adding info for No Bus:mcelog
PM: Adding info for No Bus:msr0
PM: Adding info for No Bus:msr1
PM: Adding info for platform:pcspkr
PM: Adding info for No Bus:snapshot
highmem bounce pool size: 64 pages
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 1733
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pcieport 0000:00:02.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:02.0:pcie08
pcieport 0000:00:04.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:04.0:pcie08
pcieport 0000:00:05.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:05.0:pcie08
pcieport 0000:00:06.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:06.0:pcie08
pcieport 0000:00:07.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:07.0:pcie08
PM: Adding info for No Bus:pnp1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:hpet
PM: Adding info for No Bus:isa
PM: Adding info for No Bus:ram0
PM: Adding info for No Bus:1:0
PM: Adding info for No Bus:ram1
PM: Adding info for No Bus:1:1
PM: Adding info for No Bus:ram2
PM: Adding info for No Bus:1:2
PM: Adding info for No Bus:ram3
PM: Adding info for No Bus:1:3
PM: Adding info for No Bus:ram4
PM: Adding info for No Bus:1:4
PM: Adding info for No Bus:ram5
PM: Adding info for No Bus:1:5
PM: Adding info for No Bus:ram6
PM: Adding info for No Bus:1:6
PM: Adding info for No Bus:ram7
PM: Adding info for No Bus:1:7
PM: Adding info for No Bus:ram8
PM: Adding info for No Bus:1:8
PM: Adding info for No Bus:ram9
PM: Adding info for No Bus:1:9
PM: Adding info for No Bus:ram10
PM: Adding info for No Bus:1:10
PM: Adding info for No Bus:ram11
PM: Adding info for No Bus:1:11
PM: Adding info for No Bus:ram12
PM: Adding info for No Bus:1:12
PM: Adding info for No Bus:ram13
PM: Adding info for No Bus:1:13
PM: Adding info for No Bus:ram14
PM: Adding info for No Bus:1:14
PM: Adding info for No Bus:ram15
PM: Adding info for No Bus:1:15
brd: module loaded
PNP: No PS/2 controller found. Probing ports directly.
PM: Adding info for platform:i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
PM: Adding info for No Bus:mice
PM: Adding info for No Bus:psaux
mice: PS/2 mouse device common for all mice
PM: Adding info for platform:eisa.0
EISA: Probing bus 0 at eisa.0
PM: Removing info for platform:eisa.0
cpuidle: using governor ladder
TCP cubic registered
Using IPI No-Shortcut mode
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
PM: Checking image partition /dev/hda6
PM: Resume from disk failed.
Magic number: 5:569:475
Freeing unused kernel memory: 404k freed
NET: Registered protocol family 1
PM: Adding info for No Bus:cooling_device0
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
PM: Adding info for No Bus:thermal_zone0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
Uniform Multi-Platform E-IDE driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: created debug files
ohci_hcd 0000:00:0b.0: supports USB remote wakeup
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xd5006000
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
libata version 3.00 loaded.
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ohci1394 0000:06:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
PM: Adding info for ieee1394:fw-host0
PM: Adding info for No Bus:fw-host0
ohci_hcd 0000:00:0b.0: OHCI controller state
ohci_hcd 0000:00:0b.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:0b.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:0b.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:0b.0: intrstatus 0x00000044 RHSC SF
ohci_hcd 0000:00:0b.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:0b.0: hcca frame #0003
ohci_hcd 0000:00:0b.0: roothub.a 01000208 POTPGT=1 NPS NDP=8(8)
ohci_hcd 0000:00:0b.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:0b.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:0b.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
ohci_hcd 0000:00:0b.0: roothub.portstatus [1] 0x00010101 CSC PPS CCS
ohci_hcd 0000:00:0b.0: roothub.portstatus [2] 0x00010101 CSC PPS CCS
ohci_hcd 0000:00:0b.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [4] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [5] 0x00010101 CSC PPS CCS
ohci_hcd 0000:00:0b.0: roothub.portstatus [6] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [7] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32 ohci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
PM: Adding info for usb:usb1
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
PM: Adding info for usb:1-0:1.0
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: trying to enable port power on non-switchable hub
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev1.1
drivers/usb/core/inode.c: creating file '001'
PM: Adding info for No Bus:ep_00
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: reset hcs_params 0x101888 dbg=1 cc=1 pcc=8 !ppc ports=8
ehci_hcd 0000:00:0b.1: reset portroute 0 0 0 0 0 0 0 0
ehci_hcd 0000:00:0b.1: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:0b.1: park 0
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: supports USB remote wakeup
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xd5007000
ehci_hcd 0000:00:0b.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:0b.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
usb usb1: uevent
usb usb1: uevent
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
usb usb2: SerialNumber: 0000:00:0b.1
PM: Adding info for usb:usb2
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
PM: Adding info for usb:2-0:1.0
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.1
drivers/usb/core/inode.c: creating file '001'
PM: Adding info for No Bus:ep_00
amd74xx 0000:00:0d.0: UDMA133 controller
amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
amd74xx 0000:00:0d.0: IDE port disabled
amd74xx 0000:00:0d.0: BIOS didn't set cable bits correctly. Enabling workaround.
amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf008-0xf00f
Probing IDE interface ide0...
usb usb2: uevent
usb usb2: uevent
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d4001000-d40017ff] Max Packet=[2] IR/IT contexts=[4/8]
ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
r8169 0000:06:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
r8169 0000:06:07.0: no PCI Express capability
PM: Adding info for No Bus:eth0
eth0: RTL8169sb/8110sb at 0xf8d46000, 00:14:d1:1a:ac:15, XID 10000000 IRQ 17
udev: renamed network interface eth0 to eth1
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00010300 CSC LSDA PPS
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [2] = 0x00010100 CSC PPS
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] = 0x00010100 CSC PPS
ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
hub 2-0:1.0: port 1: status 0501 change 0001
ehci_hcd 0000:00:0b.1: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 2: status 0501 change 0001
ehci_hcd 0000:00:0b.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 3: status 0501 change 0001
ehci_hcd 0000:00:0b.1: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 6: status 0501 change 0001
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 8 chg 004e evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:0b.1: port 1 low speed --> companion
ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC
hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:0b.1: port 2 high speed
ehci_hcd 0000:00:0b.1: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 2-2: new high speed USB device using ehci_hcd and address 3
ehci_hcd 0000:00:0b.1: port 2 high speed
ehci_hcd 0000:00:0b.1: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 2-2: default language 0x0409
ehci_hcd 0000:00:0b.1: detected XactErr len 0/8 retry 1
ehci_hcd 0000:00:0b.1: detected XactErr len 0/8 retry 1
usb 2-2: udev 3, busnum 2, minor = 130
usb 2-2: New USB device found, idVendor=058f, idProduct=6362
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: Mass Storage Device
usb 2-2: Manufacturer: Generic
usb 2-2: SerialNumber: 058F312D81B
PM: Adding info for usb:2-2
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
PM: Adding info for usb:2-2:1.0
usb 2-2:1.0: uevent
PM: Adding info for No Bus:ep_01
PM: Adding info for No Bus:ep_82
PM: Adding info for No Bus:usbdev2.3
drivers/usb/core/inode.c: creating file '003'
PM: Adding info for No Bus:ep_00
hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
usb 2-2: uevent
usb 2-2: uevent
Initializing USB Mass Storage driver...
usb-storage 2-2:1.0: usb_probe_interface
usb-storage 2-2:1.0: usb_probe_interface - got id
scsi0 : SCSI emulation for USB Mass Storage devices
PM: Adding info for scsi:host0
PM: Adding info for No Bus:host0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ehci_hcd 0000:00:0b.1: port 3 high speed
ehci_hcd 0000:00:0b.1: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
usb 2-3: new high speed USB device using ehci_hcd and address 4
ehci_hcd 0000:00:0b.1: port 3 high speed
ehci_hcd 0000:00:0b.1: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
usb 2-3: udev 4, busnum 2, minor = 131
usb 2-3: New USB device found, idVendor=0409, idProduct=0059
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Adding info for usb:2-3
usb 2-3: uevent
usb 2-3: usb_probe_device
usb 2-3: configuration #1 chosen from 1 choice
usb 2-3: adding 2-3:1.0 (config #1, interface 0)
PM: Adding info for usb:2-3:1.0
usb 2-3:1.0: uevent
hub 2-3:1.0: usb_probe_interface
hub 2-3:1.0: usb_probe_interface - got id
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
hub 2-3:1.0: standalone hub
hub 2-3:1.0: individual port power switching
hub 2-3:1.0: individual port over-current protection
hub 2-3:1.0: Single TT
hub 2-3:1.0: TT requires at most 16 FS bit times (1332 ns)
hub 2-3:1.0: Port indicators are supported
hub 2-3:1.0: power on to power good time: 100ms
hub 2-3:1.0: local power source is good
hub 2-3:1.0: enabling power on all ports
usb 2-3: uevent
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.4
drivers/usb/core/inode.c: creating file '004'
PM: Adding info for No Bus:ep_00
hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
usb 2-3: uevent
ehci_hcd 0000:00:0b.1: port 6 high speed
ehci_hcd 0000:00:0b.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
hub 2-3:1.0: port 3: status 0101 change 0001
usb 2-6: new high speed USB device using ehci_hcd and address 5
ehci_hcd 0000:00:0b.1: port 6 high speed
ehci_hcd 0000:00:0b.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
usb 2-3: link qh256-0001/c1cfb1c0 start 1 [1/0 us]
usb 2-6: default language 0x0409
usb 2-6: udev 5, busnum 2, minor = 132
usb 2-6: New USB device found, idVendor=05e3, idProduct=0605
usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-6: Product: USB2.0 Hub
PM: Adding info for usb:2-6
usb 2-6: uevent
usb 2-6: usb_probe_device
usb 2-6: configuration #1 chosen from 1 choice
usb 2-6: adding 2-6:1.0 (config #1, interface 0)
PM: Adding info for usb:2-6:1.0
usb 2-6:1.0: uevent
hub 2-6:1.0: usb_probe_interface
hub 2-6:1.0: usb_probe_interface - got id
hub 2-6:1.0: USB hub found
usb 2-6: uevent
hub 2-6:1.0: 4 ports detected
hub 2-6:1.0: standalone hub
hub 2-6:1.0: individual port power switching
hub 2-6:1.0: individual port over-current protection
hub 2-6:1.0: Single TT
hub 2-6:1.0: TT requires at most 32 FS bit times (2664 ns)
hub 2-6:1.0: Port indicators are supported
hub 2-6:1.0: power on to power good time: 100ms
hub 2-6:1.0: local power source is good
hub 2-6:1.0: enabling power on all ports
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.5
drivers/usb/core/inode.c: creating file '005'
PM: Adding info for No Bus:ep_00
hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
usb 2-6: uevent
hub 2-6:1.0: port 1: status 0101 change 0001
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS
hub 1-0:1.0: unable to enumerate USB device on port 1
hub 2-3:1.0: state 7 ports 4 chg 0008 evt 0000
hub 2-3:1.0: port 3, status 0101, change 0000, 12 Mb/s
hub 2-3:1.0: port 3 not reset yet, waiting 10ms
usb 2-6: link qh256-0001/c1cfb380 start 2 [1/0 us]
usb 2-3.3: new full speed USB device using ehci_hcd and address 6
hub 2-3:1.0: port 3 not reset yet, waiting 10ms
usb 2-3.3: ep0 maxpacket = 8
usb 2-3.3: default language 0x0409
usb 2-3.3: udev 6, busnum 2, minor = 133
usb 2-3.3: New USB device found, idVendor=05e3, idProduct=0604
usb 2-3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-3.3: Product: USB Hub
PM: Adding info for usb:2-3.3
usb 2-3.3: uevent
usb 2-3.3: usb_probe_device
usb 2-3.3: configuration #1 chosen from 1 choice
usb 2-3.3: adding 2-3.3:1.0 (config #1, interface 0)
PM: Adding info for usb:2-3.3:1.0
usb 2-3.3:1.0: uevent
hub 2-3.3:1.0: usb_probe_interface
hub 2-3.3:1.0: usb_probe_interface - got id
hub 2-3.3:1.0: USB hub found
usb 2-3.3: uevent
hub 2-3.3:1.0: 4 ports detected
hub 2-3.3:1.0: standalone hub
hub 2-3.3:1.0: individual port power switching
hub 2-3.3:1.0: individual port over-current protection
hub 2-3.3:1.0: power on to power good time: 100ms
hub 2-3.3:1.0: local power source is good
hub 2-3.3:1.0: enabling power on all ports
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.6
drivers/usb/core/inode.c: creating file '006'
PM: Adding info for No Bus:ep_00
hub 2-6:1.0: state 7 ports 4 chg 0002 evt 0000
usb 2-3.3: uevent
hub 2-6:1.0: port 1, status 0101, change 0000, 12 Mb/s
PM: Adding info for No Bus:ide0
PM: Adding info for No Bus:ide0
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
PM: Adding info for ieee1394:001106000000bd66
PM: Adding info for No Bus:001106000000bd66
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000000bd66]
ide0 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:0.0
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi1 : sata_nv
PM: Adding info for scsi:host1
PM: Adding info for No Bus:host1
scsi2 : sata_nv
PM: Adding info for scsi:host2
PM: Adding info for No Bus:host2
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi3 : sata_nv
PM: Adding info for scsi:host3
PM: Adding info for No Bus:host3
scsi4 : sata_nv
PM: Adding info for scsi:host4
PM: Adding info for No Bus:host4
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 20
PM: Adding info for ieee1394:001a66fffee31809
PM: Adding info for No Bus:001a66fffee31809
ieee1394: Node added: ID:BUS[0-01:1023] GUID[001a66fffee31809]
PM: Adding info for ieee1394:001a66fffee31809-0
PM: Adding info for No Bus:001a66fffee31809-0
PM: Adding info for ieee1394:001a66fffee31809-1
PM: Adding info for No Bus:001a66fffee31809-1
usb 2-6.1: new high speed USB device using ehci_hcd and address 7
hub 2-3.3:1.0: port 3: status 0301 change 0001
usb 2-6.1: udev 7, busnum 2, minor = 134
usb 2-6.1: New USB device found, idVendor=0409, idProduct=0059
usb 2-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Adding info for usb:2-6.1
usb 2-6.1: uevent
usb 2-6.1: usb_probe_device
usb 2-6.1: configuration #1 chosen from 1 choice
usb 2-6.1: adding 2-6.1:1.0 (config #1, interface 0)
PM: Adding info for usb:2-6.1:1.0
usb 2-6.1:1.0: uevent
hub 2-6.1:1.0: usb_probe_interface
hub 2-6.1:1.0: usb_probe_interface - got id
hub 2-6.1:1.0: USB hub found
hub 2-6.1:1.0: 4 ports detected
hub 2-6.1:1.0: standalone hub
hub 2-6.1:1.0: individual port power switching
hub 2-6.1:1.0: individual port over-current protection
hub 2-6.1:1.0: Single TT
hub 2-6.1:1.0: TT requires at most 16 FS bit times (1332 ns)
hub 2-6.1:1.0: Port indicators are supported
hub 2-6.1:1.0: power on to power good time: 100ms
usb 2-6.1: uevent
hub 2-6.1:1.0: local power source is good
hub 2-6.1:1.0: enabling power on all ports
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.7
drivers/usb/core/inode.c: creating file '007'
PM: Adding info for No Bus:ep_00
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS
hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
usb 2-6.1: uevent
usb 2-3.3: link qh128-0e01/c1cfbf40 start 3 [1/2 us]
hub 2-6.1:1.0: port 1: status 0301 change 0001
hub 2-6.1:1.0: port 2: status 0101 change 0001
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
hub 2-6:1.0: state 7 ports 4 chg 0000 evt 0002
hub 2-3.3:1.0: state 7 ports 4 chg 0008 evt 0000
hub 2-3.3:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
usb 2-3.3.3: new low speed USB device using ehci_hcd and address 8
hub 2-3.3:1.0: port 3 not reset yet, waiting 10ms
usb 2-6.1: link qh256-0001/c1cfbf80 start 4 [1/0 us]
usb 2-3.3.3: skipped 1 descriptor after interface
usb 2-3.3.3: skipped 1 descriptor after interface
usb 2-3.3.3: default language 0x0409
usb 2-3.3.3: udev 8, busnum 2, minor = 135
usb 2-3.3.3: New USB device found, idVendor=2222, idProduct=0013
usb 2-3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.3.3: Product: Macally iKeySlim
usb 2-3.3.3: Manufacturer: Macally Peripherals
PM: Adding info for usb:2-3.3.3
usb 2-3.3.3: uevent
usb 2-3.3.3: usb_probe_device
usb 2-3.3.3: configuration #1 chosen from 1 choice
usb 2-3.3.3: uevent
usb 2-3.3.3: adding 2-3.3.3:1.0 (config #1, interface 0)
PM: Adding info for usb:2-3.3.3:1.0
usb 2-3.3.3:1.0: uevent
PM: Adding info for No Bus:ep_81
usb 2-3.3.3: adding 2-3.3.3:1.1 (config #1, interface 1)
PM: Adding info for usb:2-3.3.3:1.1
usb 2-3.3.3:1.1: uevent
PM: Adding info for No Bus:ep_82
PM: Adding info for No Bus:usbdev2.8
drivers/usb/core/inode.c: creating file '008'
PM: Adding info for No Bus:ep_00
hub 2-3.3:1.0: state 7 ports 4 chg 0000 evt 0008
usb 2-3.3.3: uevent
hub 2-6.1:1.0: state 7 ports 4 chg 0006 evt 0000
hub 2-6.1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
usbcore: registered new interface driver hiddev
usbhid 2-3.3.3:1.0: usb_probe_interface
usbhid 2-3.3.3:1.0: usb_probe_interface - got id
PM: Adding info for hid:0003:2222:0013.0001
PM: Adding info for No Bus:input0
input: Macally Peripherals Macally iKeySlim as /devices/pci0000:00/0000:00:0b.1/usb2/2-3/2-3.3/2-3.3.3/2-3.3.3:1.0/input/input0
usb 2-3.3.3: link qh8-0e01/c1d95100 start 5 [1/2 us]
generic-usb 0003:2222:0013.0001: input: USB HID v1.10 Keyboard [Macally Peripherals Macally iKeySlim] on usb-0000:00:0b.1-3.3.3/input0
usbhid 2-3.3.3:1.1: usb_probe_interface
usbhid 2-3.3.3:1.1: usb_probe_interface - got id
PM: Adding info for hid:0003:2222:0013.0002
hub 2-6.1:1.0: port 1 not reset yet, waiting 10ms
PM: Adding info for No Bus:input1
input: Macally Peripherals Macally iKeySlim as /devices/pci0000:00/0000:00:0b.1/usb2/2-3/2-3.3/2-3.3.3/2-3.3.3:1.1/input/input1
usb 2-3.3.3: link qh8-0e01/c1d95200 start 6 [1/2 us]
PM: Adding info for No Bus:mouse0
generic-usb 0003:2222:0013.0002: input: USB HID v1.10 Mouse [Macally Peripherals Macally iKeySlim] on usb-0000:00:0b.1-3.3.3/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 2-6.1.1: new low speed USB device using ehci_hcd and address 9
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
hub 2-6.1:1.0: port 1 not reset yet, waiting 10ms
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
PM: Adding info for scsi:target1:0:0
PM: Adding info for scsi:1:0:0:0
PM: Adding info for No Bus:1:0:0:0
PM: Adding info for No Bus:1:0:0:0
usb 2-6.1.1: skipped 1 descriptor after interface
usb 2-6.1.1: skipped 1 descriptor after interface
usb 2-6.1.1: default language 0x0409
usb 2-6.1.1: udev 9, busnum 2, minor = 136
usb 2-6.1.1: New USB device found, idVendor=10d5, idProduct=0004
usb 2-6.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-6.1.1: Product: PS2 to USB AdapterA3
PM: Adding info for usb:2-6.1.1
usb 2-6.1.1: uevent
usb 2-6.1.1: usb_probe_device
usb 2-6.1.1: configuration #1 chosen from 1 choice
usb 2-6.1.1: uevent
usb 2-6.1.1: adding 2-6.1.1:1.0 (config #1, interface 0)
PM: Adding info for usb:2-6.1.1:1.0
usb 2-6.1.1:1.0: uevent
usbhid 2-6.1.1:1.0: usb_probe_interface
usbhid 2-6.1.1:1.0: usb_probe_interface - got id
PM: Adding info for hid:0003:10D5:0004.0003
PM: Adding info for No Bus:input2
input: PS2 to USB AdapterA3 as /devices/pci0000:00/0000:00:0b.1/usb2/2-6/2-6.1/2-6.1.1/2-6.1.1:1.0/input/input2
usb 2-6.1.1: link qh8-0e01/c1d955c0 start 7 [1/2 us]
generic-usb 0003:10D5:0004.0003: input: USB HID v1.10 Keyboard [PS2 to USB AdapterA3] on usb-0000:00:0b.1-6.1.1/input0
PM: Adding info for No Bus:ep_81
usb 2-6.1.1: adding 2-6.1.1:1.1 (config #1, interface 1)
PM: Adding info for usb:2-6.1.1:1.1
usb 2-6.1.1:1.1: uevent
usbhid 2-6.1.1:1.1: usb_probe_interface
usbhid 2-6.1.1:1.1: usb_probe_interface - got id
PM: Adding info for hid:0003:10D5:0004.0004
PM: Adding info for No Bus:input3
input: PS2 to USB AdapterA3 as /devices/pci0000:00/0000:00:0b.1/usb2/2-6/2-6.1/2-6.1.1/2-6.1.1:1.1/input/input3
usb 2-6.1.1: link qh8-0e01/c1d95680 start 0 [1/2 us]
PM: Adding info for No Bus:mouse1
generic-usb 0003:10D5:0004.0004: input: USB HID v1.10 Mouse [PS2 to USB AdapterA3] on usb-0000:00:0b.1-6.1.1/input1
PM: Adding info for No Bus:ep_82
PM: Adding info for No Bus:usbdev2.9
drivers/usb/core/inode.c: creating file '009'
PM: Adding info for No Bus:ep_00
usb 2-6.1.1: uevent
hub 2-6.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
hub 2-6.1:1.0: port 2 not reset yet, waiting 10ms
usb 2-6.1.2: new high speed USB device using ehci_hcd and address 10
hub 2-6.1:1.0: port 2 not reset yet, waiting 10ms
usb 2-6.1.2: default language 0x0409
usb 2-6.1.2: udev 10, busnum 2, minor = 137
usb 2-6.1.2: New USB device found, idVendor=05e3, idProduct=0605
usb 2-6.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-6.1.2: Product: USB2.0 Hub
PM: Adding info for usb:2-6.1.2
usb 2-6.1.2: uevent
usb 2-6.1.2: usb_probe_device
usb 2-6.1.2: configuration #1 chosen from 1 choice
usb 2-6.1.2: adding 2-6.1.2:1.0 (config #1, interface 0)
PM: Adding info for usb:2-6.1.2:1.0
usb 2-6.1.2:1.0: uevent
hub 2-6.1.2:1.0: usb_probe_interface
hub 2-6.1.2:1.0: usb_probe_interface - got id
hub 2-6.1.2:1.0: USB hub found
hub 2-6.1.2:1.0: 4 ports detected
hub 2-6.1.2:1.0: standalone hub
hub 2-6.1.2:1.0: individual port power switching
hub 2-6.1.2:1.0: individual port over-current protection
hub 2-6.1.2:1.0: Single TT
hub 2-6.1.2:1.0: TT requires at most 32 FS bit times (2664 ns)
hub 2-6.1.2:1.0: Port indicators are supported
hub 2-6.1.2:1.0: power on to power good time: 100ms
usb 2-6.1.2: uevent
hub 2-6.1.2:1.0: local power source is good
hub 2-6.1.2:1.0: enabling power on all ports
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.10
drivers/usb/core/inode.c: creating file '010'
PM: Adding info for No Bus:ep_00
hub 2-3.3:1.0: state 7 ports 4 chg 0000 evt 0002
usb 2-6.1.2: uevent
hub 2-3.3:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 2-6.1.2:1.0: port 1: status 0101 change 0001
hub 2-6.1.2:1.0: port 2: status 0301 change 0001
hub 2-3.3:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 2-3.3.1: new low speed USB device using ehci_hcd and address 11
usb 2-6.1.2: link qh256-0001/c1d957c0 start 9 [1/0 us]
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 2-3.3.1: skipped 1 descriptor after interface
usb 2-3.3.1: default language 0x0409
usb 2-3.3.1: udev 11, busnum 2, minor = 138
usb 2-3.3.1: New USB device found, idVendor=2222, idProduct=3100
usb 2-3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.3.1: Product: Macally ECOMouse
usb 2-3.3.1: Manufacturer: Macally Peripherals
PM: Adding info for usb:2-3.3.1
usb 2-3.3.1: uevent
usb 2-3.3.1: usb_probe_device
usb 2-3.3.1: configuration #1 chosen from 1 choice
usb 2-3.3.1: adding 2-3.3.1:1.0 (config #1, interface 0)
PM: Adding info for usb:2-3.3.1:1.0
usb 2-3.3.1:1.0: uevent
usbhid 2-3.3.1:1.0: usb_probe_interface
usbhid 2-3.3.1:1.0: usb_probe_interface - got id
PM: Adding info for hid:0003:2222:3100.0005
usb 2-3.3.1: uevent
ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
PM: Adding info for No Bus:input4
input: Macally Peripherals Macally ECOMouse as /devices/pci0000:00/0000:00:0b.1/usb2/2-3/2-3.3/2-3.3.1/2-3.3.1:1.0/input/input4
PM: Adding info for No Bus:mouse2
generic-usb 0003:2222:3100.0005: input: USB HID v1.00 Mouse [Macally Peripherals Macally ECOMouse ] on usb-0000:00:0b.1-3.3.1/input0
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.11
drivers/usb/core/inode.c: creating file '011'
PM: Adding info for No Bus:ep_00
hub 2-6.1:1.0: state 7 ports 4 chg 0000 evt 0002
usb 2-3.3.1: uevent
hub 2-3.3:1.0: state 7 ports 4 chg 0000 evt 0002
hub 2-6.1.2:1.0: state 7 ports 4 chg 0006 evt 0000
hub 2-6.1.2:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb 2-6.1.2.1: new high speed USB device using ehci_hcd and address 12
ata2.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
PM: Adding info for scsi:target2:0:0
PM: Adding info for scsi:2:0:0:0
PM: Adding info for No Bus:2:0:0:0
PM: Adding info for No Bus:2:0:0:0
hub 2-6.1.2:1.0: port 1 not reset yet, waiting 10ms
usb 2-6.1.2.1: default language 0x0409
usb 2-6.1.2.1: udev 12, busnum 2, minor = 139
usb 2-6.1.2.1: New USB device found, idVendor=090c, idProduct=1000
usb 2-6.1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6.1.2.1: Product: DISK 2.0
usb 2-6.1.2.1: Manufacturer: USB
usb 2-6.1.2.1: SerialNumber: PHN84K6AD8PLXSVC
PM: Adding info for usb:2-6.1.2.1
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1: usb_probe_device
usb 2-6.1.2.1: configuration #1 chosen from 1 choice
usb 2-6.1.2.1: adding 2-6.1.2.1:1.0 (config #1, interface 0)
PM: Adding info for usb:2-6.1.2.1:1.0
usb 2-6.1.2.1:1.0: uevent
usb-storage 2-6.1.2.1:1.0: usb_probe_interface
usb-storage 2-6.1.2.1:1.0: usb_probe_interface - got id
scsi5 : SCSI emulation for USB Mass Storage devices
PM: Adding info for scsi:host5
PM: Adding info for No Bus:host5
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_02
PM: Adding info for No Bus:usbdev2.12
drivers/usb/core/inode.c: creating file '012'
PM: Adding info for No Bus:ep_00
usb-storage: device found at 12
usb-storage: waiting for device to settle before scanning
usb 2-6.1.2.1: uevent
hub 2-6.1.2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
usb 2-6.1.2.1: uevent
usb 2-6.1.2.2: new low speed USB device using ehci_hcd and address 13
hub 2-6.1.2:1.0: port 2 not reset yet, waiting 10ms
usb 2-6.1.2.2: skipped 1 descriptor after interface
usb 2-6.1.2.2: default language 0x0409
usb 2-6.1.2.2: udev 13, busnum 2, minor = 140
usb 2-6.1.2.2: New USB device found, idVendor=046d, idProduct=c00c
usb 2-6.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6.1.2.2: Product: USB Optical Mouse
usb 2-6.1.2.2: Manufacturer: Logitech
PM: Adding info for usb:2-6.1.2.2
usb 2-6.1.2.2: uevent
usb 2-6.1.2.2: usb_probe_device
usb 2-6.1.2.2: configuration #1 chosen from 1 choice
usb 2-6.1.2.2: adding 2-6.1.2.2:1.0 (config #1, interface 0)
PM: Adding info for usb:2-6.1.2.2:1.0
usb 2-6.1.2.2:1.0: uevent
usbhid 2-6.1.2.2:1.0: usb_probe_interface
usbhid 2-6.1.2.2:1.0: usb_probe_interface - got id
PM: Adding info for hid:0003:046D:C00C.0006
usb 2-6.1.2.2: uevent
PM: Adding info for No Bus:input5
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb2/2-6/2-6.1/2-6.1.2/2-6.1.2.2/2-6.1.2.2:1.0/input/input5
PM: Adding info for No Bus:mouse3
generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0b.1-6.1.2.2/input0
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.13
drivers/usb/core/inode.c: creating file '013'
PM: Adding info for No Bus:ep_00
hub 2-6.1.2:1.0: state 7 ports 4 chg 0000 evt 0004
usb 2-6.1.2.2: uevent
ohci_hcd 0000:00:0b.0: auto-stop root hub
scsi 0:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
PM: Adding info for scsi:target0:0:0
PM: Adding info for scsi:0:0:0:0
PM: Adding info for No Bus:0:0:0:0
PM: Adding info for No Bus:0:0:0:0
scsi 0:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
PM: Adding info for scsi:0:0:0:1
PM: Adding info for No Bus:0:0:0:1
PM: Adding info for No Bus:0:0:0:1
scsi 0:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
PM: Adding info for scsi:0:0:0:2
PM: Adding info for No Bus:0:0:0:2
PM: Adding info for No Bus:0:0:0:2
scsi 0:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
PM: Adding info for scsi:0:0:0:3
PM: Adding info for No Bus:0:0:0:3
PM: Adding info for No Bus:0:0:0:3
usb-storage: device scan complete
PM: Adding info for No Bus:1:0:0:0
PM: Adding info for No Bus:2:0:0:0
PM: Adding info for No Bus:0:0:0:0
PM: Adding info for No Bus:0:0:0:1
PM: Adding info for No Bus:0:0:0:2
PM: Adding info for No Bus:0:0:0:3
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sdb
sdb:
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sda:
PM: Adding info for No Bus:sdc
PM: Adding info for No Bus:8:32
PM: Adding info for No Bus:sdd
PM: Adding info for No Bus:8:48
PM: Adding info for No Bus:sde
PM: Adding info for No Bus:8:64
PM: Adding info for No Bus:sdf
PM: Adding info for No Bus:8:80
sd 0:0:0:0: [sdc] Attached SCSI removable disk
sda1 sda2 sda3 <
sd 0:0:0:1: [sdd] Attached SCSI removable disk
sd 0:0:0:2: [sde] Attached SCSI removable disk
sd 0:0:0:3: [sdf] Attached SCSI removable disk
>
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
PM: Adding info for No Bus:8:0
sd 1:0:0:0: [sda] Attached SCSI disk
unknown partition table
PM: Adding info for No Bus:8:16
sd 2:0:0:0: [sdb] Attached SCSI disk
ata3.00: qc timeout (cmd 0xa0)
ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access USB DISK 2.0 0403 PQ: 0 ANSI: 0 CCS
PM: Adding info for scsi:target5:0:0
PM: Adding info for scsi:5:0:0:0
PM: Adding info for No Bus:5:0:0:0
PM: Adding info for No Bus:5:0:0:0
PM: Adding info for No Bus:5:0:0:0
usb-storage: device scan complete
sd 5:0:0:0: [sdg] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB)
sd 5:0:0:0: [sdg] Write Protect is off
sd 5:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdg] Assuming drive cache: write through
PM: Adding info for No Bus:sdg
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
PM: Adding info for No Bus:sdg1
PM: Adding info for No Bus:8:96
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sd 5:0:0:0: [sdg] Attached SCSI removable disk
ata3.00: qc timeout (cmd 0xa0)
ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
ata3: limiting SATA link speed to 1.5 Gbps
ata3.00: limiting speed to UDMA/100:PIO3
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3.00: qc timeout (cmd 0xa0)
ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
ata3.00: disabled
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: EH complete
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.1: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
ide-cd driver 5.00
PM: Adding info for No Bus:0.0
ide-cd: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
PM: Adding info for No Bus:device-mapper
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
PM: Adding info for No Bus:dm-0
PM: Adding info for No Bus:254:0
PM: Adding info for No Bus:dm-1
PM: Adding info for No Bus:254:1
PM: Adding info for No Bus:dm-2
PM: Adding info for No Bus:254:2
PM: Adding info for No Bus:dm-3
PM: Adding info for No Bus:254:3
PM: Adding info for No Bus:dm-4
PM: Adding info for No Bus:254:4
PM: Adding info for No Bus:dm-5
PM: Adding info for No Bus:254:5
PM: Adding info for No Bus:hda
PM: Adding info for No Bus:3:0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7516.000 MB/sec
xor: using function: pIII_sse (7516.000 MB/sec)
raid6: int32x1 878 MB/s
raid6: int32x2 839 MB/s
raid6: int32x4 703 MB/s
raid6: int32x8 585 MB/s
raid6: mmxx1 2742 MB/s
raid6: mmxx2 3167 MB/s
raid6: sse1x1 1890 MB/s
raid6: sse1x2 2441 MB/s
raid6: sse2x1 3546 MB/s
raid6: sse2x2 4222 MB/s
raid6: using algorithm sse2x2 (4222 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
PM: Marking nosave pages: 000000000009c000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udev: starting version 146
usb usb1: uevent
usb 1-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-3: uevent
usb 2-3.3: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-3.3.3: uevent
usb 2-3.3.3:1.0: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3:1.0: uevent
usb 2-3:1.0: uevent
usb 2-6: uevent
usb 2-6.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.0: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.2: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.2:1.0: uevent
usb 2-6.1:1.0: uevent
usb 2-6:1.0: uevent
usb usb1: uevent
usb usb2: uevent
usb usb1: uevent
usb usb2: uevent
usb 2-6: uevent
usb 2-2: uevent
usb 2-3: uevent
usb 2-6: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-3: uevent
PM: Adding info for No Bus:input6
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
PM: Adding info for No Bus:input7
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
usb 2-6.1: uevent
usb 2-2:1.0: uevent
usb 2-6.1: uevent
usb 2-3.3: uevent
usb 2-3.3: uevent
usb 2-6.1.2: uevent
usb 2-3.3.1: uevent
PM: Adding info for No Bus:rtc
Real Time Clock Driver v1.12b
usb 2-6.1.2: uevent
usb 2-3.3.1: uevent
usb 2-6.1.1: uevent
usb 2-3.3.3: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.1: uevent
usb 2-3.3.3: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.1: uevent
ACPI: SSDT 7fefa940 00175 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
PM: Adding info for No Bus:cooling_device1
processor LNXCPU:00: registered as cooling_device1
ACPI: SSDT 7fefad50 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
PM: Adding info for No Bus:cooling_device2
processor LNXCPU:01: registered as cooling_device2
PM: Adding info for No Bus:raw1394
ieee1394: raw1394: /dev/raw1394 device initialized
PM: Adding info for No Bus:hwmon0
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:event1
PM: Adding info for No Bus:event2
PM: Adding info for No Bus:event3
PM: Adding info for No Bus:event4
PM: Adding info for No Bus:event5
PM: Adding info for No Bus:event6
PM: Adding info for No Bus:event7
usb 2-3.3.3:1.0: uevent
usb 2-3.3.3: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.1:1.0: uevent
usb 2-6.1.1: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3.3: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3.3: uevent
usb 2-3.3.3:1.0: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.1:1.0: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3.3:1.1: uevent
usb 2-6.1.2.2:1.0: uevent
ACPI: I/O resource nForce2_smbus [0x5000-0x503f] conflicts with ACPI region SM00 [0x5000-0x5005]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
nForce2_smbus 0000:00:0a.1: Error probing SMB1.
PM: Adding info for i2c:i2c-0
i2c i2c-0: nForce2 SMBus adapter at 0x5100
usb 2-3.3.1:1.0: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-3.3.1:1.0: uevent
PM: Adding info for No Bus:dv1394-0
usb 2-6.1.1:1.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.1: uevent
PM: Adding info for No Bus:timer
PM: Adding info for No Bus:seq
hda: UDMA/66 mode selected
PM: Adding info for No Bus:sequencer
PM: Adding info for No Bus:sequencer2
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
HDA Intel 0000:00:10.1: setting latency timer to 64
PM: Adding info for No Bus:input8
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input8
PM: Adding info for No Bus:event8
PM: Adding info for No Bus:card0
PM: Adding info for No Bus:pcmC0D1p
PM: Adding info for No Bus:adsp
PM: Adding info for No Bus:pcmC0D0p
PM: Adding info for No Bus:pcmC0D0c
PM: Adding info for No Bus:dsp
PM: Adding info for No Bus:audio
PM: Adding info for No Bus:hwC0D0
PM: Adding info for No Bus:controlC0
PM: Adding info for No Bus:mixer
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
hda: UDMA/66 mode selected
EXT3 FS on dm-1, internal journal
i2c /dev entries driver
PM: Adding info for No Bus:i2c-0
it87: Found IT8712F chip at 0x290, revision 7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
fuse init (API version 7.13)
PM: Adding info for No Bus:fuse
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
PM: Adding info for No Bus:254:2-fuseblk
PM: Adding info for No Bus:254:5-fuseblk
Adding 4194296k swap on /mnt/oldlin/4G-memory.swap. Priority:-1 extents:1057 across:4264956k
r8169: eth1: link up
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PM: Adding info for No Bus:0:16
PM: Adding info for No Bus:0:17
PM: Adding info for No Bus:0:18
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
usb 2-3.3.1: link qh8-0e01/f739a940 start 2 [1/2 us]
usb 2-6.1.2.2: link qh8-0e01/f739a900 start 3 [1/2 us]
usb 2-3.3.1: unlink qh8-0e01/f739a940 start 2 [1/2 us]
usb 2-6.1.2.2: unlink qh8-0e01/f739a900 start 3 [1/2 us]
ehci_hcd 0000:00:0b.1: reused qh f739a940 schedule
usb 2-3.3.1: link qh8-0e01/f739a940 start 2 [1/2 us]
ehci_hcd 0000:00:0b.1: reused qh f739a900 schedule
usb 2-6.1.2.2: link qh8-0e01/f739a900 start 3 [1/2 us]
irda_init()
NET: Registered protocol family 23
usbcore: registered new interface driver stir4200
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.1: uevent
usb 2-2:1.0: uevent
usb 2-6.1.2.1:1.0: uevent
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
usb usb1: uevent
usb 1-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-3: uevent
usb 2-3.3: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-3.3.3: uevent
usb 2-3.3.3:1.0: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3:1.0: uevent
usb 2-3:1.0: uevent
usb 2-6: uevent
usb 2-6.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.0: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.2: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.2:1.0: uevent
usb 2-6.1:1.0: uevent
usb 2-6:1.0: uevent
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
PM: Adding info for i2c:i2c-1
PM: Adding info for No Bus:i2c-1
PM: Adding info for i2c:i2c-2
PM: Adding info for No Bus:i2c-2
PM: Adding info for i2c:i2c-3
PM: Adding info for No Bus:i2c-3
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x50 { LastFailedSense=0x05 }
hda: possibly failed opcode: 0xa0
end_request: I/O error, dev hda, sector 768856
Buffer I/O error on device hda, logical block 96107
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x50 { LastFailedSense=0x05 }
hda: possibly failed opcode: 0xa0
end_request: I/O error, dev hda, sector 768856
Buffer I/O error on device hda, logical block 96107
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x50 { LastFailedSense=0x05 }
hda: possibly failed opcode: 0xa0
end_request: I/O error, dev hda, sector 768856
Buffer I/O error on device hda, logical block 96107
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x50 { LastFailedSense=0x05 }
hda: possibly failed opcode: 0xa0
end_request: I/O error, dev hda, sector 768856
Buffer I/O error on device hda, logical block 96107
usb usb1: uevent
usb 1-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-3: uevent
usb 2-3:1.0: uevent
usb 2-6: uevent
usb 2-6:1.0: uevent
usb 2-3.3: uevent
usb 2-3.3:1.0: uevent
usb 2-6.1: uevent
usb 2-6.1:1.0: uevent
usb 2-3.3.3: uevent
usb 2-3.3.3:1.0: uevent
usb 2-3.3.3:1.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.0: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.2: uevent
usb 2-6.1.2:1.0: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.2.2:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-3: uevent
usb 2-3.3: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-3.3.3: uevent
usb 2-3.3.3:1.0: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3:1.0: uevent
usb 2-3:1.0: uevent
usb 2-6: uevent
usb 2-6.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.0: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.2: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.2:1.0: uevent
usb 2-6.1:1.0: uevent
usb 2-6:1.0: uevent
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
usb usb1: uevent
usb 1-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-3: uevent
usb 2-3.3: uevent
usb 2-3.3.1: uevent
usb 2-3.3.1:1.0: uevent
usb 2-3.3.3: uevent
usb 2-3.3.3:1.0: uevent
usb 2-3.3.3:1.1: uevent
usb 2-3.3:1.0: uevent
usb 2-3:1.0: uevent
usb 2-6: uevent
usb 2-6.1: uevent
usb 2-6.1.1: uevent
usb 2-6.1.1:1.0: uevent
usb 2-6.1.1:1.1: uevent
usb 2-6.1.2: uevent
usb 2-6.1.2.1: uevent
usb 2-6.1.2.1:1.0: uevent
usb 2-6.1.2.2: uevent
usb 2-6.1.2.2:1.0: uevent
usb 2-6.1.2:1.0: uevent
usb 2-6.1:1.0: uevent
usb 2-6:1.0: uevent
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
r8169: eth1: link up
ehci_hcd 0000:00:0b.1: detected XactErr len 0/31 retry 1
ieee1394: Node paused: ID:BUS[0-01:1023] GUID[001a66fffee31809]
ieee1394: Node reactivated: ID:BUS[0-01:1023] GUID[001a66fffee31809]
salon
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=D8F42417-5326-DB11-B746-517A9EEA8F7C
*-core
description: Motherboard
product: P5NSLI
vendor: ASUSTeK Computer INC.
physical id: 0
version: 1.XX
serial: 123456789000
*-firmware
description: BIOS
vendor: Phoenix Technologies, LTD
physical id: 0
version: ASUS P5NSLI ACPI BIOS Revision 1801 (11/18/2008)
size: 128KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.6
serial: 0000-06F6-0000-0000-0000-0000
slot: Socket 775
size: 2133MHz
capacity: 3800MHz
width: 64 bits
clock: 266MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow cpufreq
configuration: id=0
*-cache:0
description: L1 cache
physical id: a
slot: L1 Cache
size: 32KiB
capacity: 32KiB
capabilities: synchronous internal write-back data
*-cache:1
description: L2 cache
physical id: b
slot: L2 Cache
size: 2MiB
capacity: 2MiB
capabilities: synchronous internal write-back unified
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 64 bits
capabilities: logical
*-memory
description: System Memory
physical id: 34
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 0
serial: None
slot: DIMM_A1
size: 1GiB
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM [empty]
product: None
vendor: None
physical id: 1
serial: None
slot: DIMM_A2
*-bank:2
description: DIMM DDR2 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 2
serial: None
slot: DIMM_B1
size: 1GiB
clock: 667MHz (1.5ns)
*-bank:3
description: DIMM [empty]
product: None
vendor: None
physical id: 3
serial: None
slot: DIMM_B2
*-cpu:1
physical id: 1
bus info: cpu@1
version: 6.15.6
serial: 0000-06F6-0000-0000-0000-0000
size: 2133MHz
capacity: 2133MHz
capabilities: vmx ht cpufreq
configuration: id=0
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
capabilities: logical
*-pci
description: Host bridge
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: a3
width: 32 bits
clock: 66MHz
*-memory:0 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:00:00.1
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:1 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.2
bus info: pci@0000:00:00.2
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:2 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.3
bus info: pci@0000:00:00.3
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:3 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.4
bus info: pci@0000:00:00.4
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: bus_master
configuration: latency=0
*-memory:4 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:5 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:6 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:7 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1.3
bus info: pci@0000:00:01.3
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:8 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1.4
bus info: pci@0000:00:01.4
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:9 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1.5
bus info: pci@0000:00:01.5
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:10 UNCLAIMED
description: RAM memory
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 1.6
bus info: pci@0000:00:01.6
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-pci:0
description: PCI bridge
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:0 ioport:a000(size=4096) memory:d0000000-d2ffffff ioport:c0000000(size=268435456)
*-display
description: VGA compatible controller
product: G71 [GeForce 7900 GT/GTO]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:16 memory:d0000000-d0ffffff memory:c0000000-cfffffff(prefetchable) memory:d1000000-d1ffffff ioport:a000(size=128) memory:d2000000-d201ffff(prefetchable)
*-pci:1
description: PCI bridge
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 4
bus info: pci@0000:00:04.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:0
*-pci:2
description: PCI bridge
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:0
*-pci:3
description: PCI bridge
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:0
*-pci:4
description: PCI bridge
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:0
*-memory:11 UNCLAIMED
description: RAM memory
product: MCP51 Host Bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP51 LPC Bridge
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:0a.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-serial
description: SMBus
product: MCP51 SMBus
vendor: nVidia Corporation
physical id: a.1
bus info: pci@0000:00:0a.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:11 ioport:5000(size=64) ioport:5100(size=64)
*-memory:12 UNCLAIMED
description: RAM memory
product: MCP51 Memory Controller 0
vendor: nVidia Corporation
physical id: a.2
bus info: pci@0000:00:0a.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP51 USB Controller
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:23 memory:d5006000-d5006fff
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.32 ohci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=8 speed=12.0MB/s
*-usb:1
description: USB Controller
product: MCP51 USB Controller
vendor: nVidia Corporation
physical id: b.1
bus info: pci@0000:00:0b.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:22 memory:d5007000-d50070ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.32 ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-usb:0
description: Mass storage device
product: Mass Storage Device
vendor: Generic
physical id: 2
bus info: usb@2:2
logical name: scsi0
version: 1.26
serial: 058F312D81B
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=100mA speed=480.0MB/s
*-disk:0
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sdc
*-disk:1
description: SCSI Disk
physical id: 0.0.1
bus info: scsi@0:0.0.1
logical name: /dev/sdd
*-disk:2
description: SCSI Disk
physical id: 0.0.2
bus info: scsi@0:0.0.2
logical name: /dev/sde
*-disk:3
description: SCSI Disk
physical id: 0.0.3
bus info: scsi@0:0.0.3
logical name: /dev/sdf
*-usb:1
description: USB hub
product: HighSpeed Hub
vendor: NEC Corp.
physical id: 3
bus info: usb@2:3
version: 1.00
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480.0MB/s
*-usb
description: USB hub
product: USB Hub
vendor: Genesys Logic, Inc.
physical id: 3
bus info: usb@2:3.3
version: 3.05
capabilities: usb-1.10
configuration: driver=hub maxpower=100mA slots=4 speed=12.0MB/s
*-usb:0
description: Mouse
product: Macally ECOMouse
vendor: Macally Peripherals
physical id: 1
bus info: usb@2:3.3.1
version: 51.04
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-usb:1
description: Keyboard
product: Macally iKeySlim
vendor: Macally Peripherals
physical id: 3
bus info: usb@2:3.3.3
version: 1.01
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-usb:2
description: USB hub
product: USB2.0 Hub
vendor: Genesys Logic, Inc.
physical id: 6
bus info: usb@2:6
version: 6.0b
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480.0MB/s
*-usb
description: USB hub
product: HighSpeed Hub
vendor: NEC Corp.
physical id: 1
bus info: usb@2:6.1
version: 1.00
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480.0MB/s
*-usb:0
description: Keyboard
product: PS2 to USB AdapterA3
vendor: Uni Class Technology Co., Ltd
physical id: 1
bus info: usb@2:6.1.1
version: 0.01
capabilities: usb-1.10
configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
*-usb:1
description: USB hub
product: USB2.0 Hub
vendor: Genesys Logic, Inc.
physical id: 2
bus info: usb@2:6.1.2
version: 6.0b
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480.0MB/s
*-usb:0
description: Mass storage device
product: DISK 2.0
vendor: USB
physical id: 1
bus info: usb@2:6.1.2.1
logical name: scsi5
version: 4.03
serial: PHN84K6AD8PLXSVC
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=100mA speed=480.0MB/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@5:0.0.0
logical name: /dev/sdg
size: 1944MiB (2038MB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: guid=44a4b1dc-a2a3-4289-993a-f99b28f82c34
*-volume:0 UNCLAIMED
description: EFI partition
physical id: 1
bus info: scsi@5:0.0.0,1
serial: 39a6a1b7-06c1-4e87-97aa-6233c448cae8
capacity: 95MiB
configuration: name=primary
*-volume:1 UNCLAIMED
description: Windows reserved partition
physical id: 2
bus info: scsi@5:0.0.0,2
serial: 2c9a9f6c-f9ff-45db-8808-7da0d594cf25
capacity: 1848MiB
capabilities: nofs
*-usb:1
description: Mouse
product: USB Optical Mouse
vendor: Logitech
physical id: 2
bus info: usb@2:6.1.2.2
version: 21.10
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-ide:0
description: IDE interface
product: MCP51 IDE
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=AMD_IDE latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
*-ide
description: IDE Channel 1
physical id: 0
bus info: ide@0
logical name: ide0
clock: 66MHz
*-cdrom
description: DVD writer
product: PIONEER DVD-RW DVR-111D
vendor: Pioneer
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
logical name: /media/Indigo CD1
version: 1.23
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy pm audio cd-r cd-rw dvd dvd-r
configuration: mode=udma4 mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,uid=501 state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/hda
logical name: /media/Indigo CD1
configuration: mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,uid=501 state=mounted
*-storage
description: RAID bus controller
product: MCP51 Serial ATA Controller
vendor: nVidia Corporation
physical id: e
bus info: pci@0000:00:0e.0
logical name: scsi1
logical name: scsi2
version: a1
width: 32 bits
clock: 66MHz
capabilities: storage pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:21 ioport:9f0(size=8) ioport:bf0(size=4) ioport:970(size=8) ioport:b70(size=4) ioport:d400(size=16) memory:d5004000-d5004fff
*-disk:0
description: ATA Disk
product: SAMSUNG SP2504C
physical id: 0
bus info: scsi@1:0.0.0
logical name: /dev/sda
version: VT10
serial: S09QJ1NL410815
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=9df59df5
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sda1
version: 1.0
serial: 9370b0bb-092a-4a6f-b68d-c5f7b87390ef
size: 13GiB
capacity: 13GiB
capabilities: primary journaled recover ext3 ext2 initialized
configuration: created=2006-09-11 10:48:14 filesystem=ext3 modified=2009-12-20 20:10:31 mounted=2009-12-22 04:29:12 state=clean
*-volume:1
description: HPFS/NTFS partition
physical id: 2
bus info: scsi@1:0.0.0,2
logical name: /dev/sda2
capacity: 112GiB
capabilities: primary bootable
*-disk:1
description: ATA Disk
product: ST3250620AS
vendor: Seagate
physical id: 1
bus info: scsi@2:0.0.0
logical name: /dev/sdb
version: 3.AA
serial: 5QE0AXQ8
size: 232GiB (250GB)
configuration: ansiversion=5
*-ide:1
description: IDE interface
product: MCP51 Serial ATA Controller
vendor: nVidia Corporation
physical id: f
bus info: pci@0000:00:0f.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:20 ioport:9e0(size=8) ioport:be0(size=4) ioport:960(size=8) ioport:b60(size=4) ioport:e800(size=16) memory:d5005000-d5005fff
*-pci:5
description: PCI bridge
product: MCP51 PCI Bridge
vendor: nVidia Corporation
physical id: 10
bus info: pci@0000:00:10.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
resources: ioport:b000(size=4096) memory:d3000000-d4ffffff memory:80000000-800fffff(prefetchable)
*-firewire
description: FireWire (IEEE 1394)
product: VT6306 Fire II IEEE 1394 OHCI Link Layer Controller
vendor: VIA Technologies, Inc.
physical id: 6
bus info: pci@0000:06:06.0
version: 46
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci1394 latency=32 maxlatency=32
resources: irq:16 memory:d4001000-d40017ff ioport:b000(size=128)
*-network
description: Ethernet interface
product: RTL-8169 Gigabit Ethernet
vendor: Realtek Semiconductor Co., Ltd.
physical id: 7
bus info: pci@0000:06:07.0
logical name: eth1
version: 10
serial: 00:14:d1:1a:ac:15
size: 1GB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.33 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=1GB/s
resources: irq:17 ioport:b400(size=256) memory:d4000000-d40000ff memory:80000000-8001ffff(prefetchable)
*-multimedia
description: Audio device
product: MCP51 High Definition Audio
vendor: nVidia Corporation
physical id: 10.1
bus info: pci@0000:00:10.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:d5000000-d5003fff
00:00.0 Host bridge: nVidia Corporation Device 0071 (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 8189
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [40] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd-
Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 0.16

00:00.1 RAM memory: nVidia Corporation Device 007f (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 RAM memory: nVidia Corporation Device 0075 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory: nVidia Corporation Device 006f (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory: nVidia Corporation Device 00b4 (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 RAM memory: nVidia Corporation Device 0076 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.1 RAM memory: nVidia Corporation Device 0078 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.2 RAM memory: nVidia Corporation Device 0079 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 RAM memory: nVidia Corporation Device 007a (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.4 RAM memory: nVidia Corporation Device 007b (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.5 RAM memory: nVidia Corporation Device 007c (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.6 RAM memory: nVidia Corporation Device 007d (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 PCI bridge: nVidia Corporation Device 007e (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport

00:04.0 PCI bridge: nVidia Corporation Device 007e (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport

00:05.0 PCI bridge: nVidia Corporation Device 007e (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport

00:06.0 PCI bridge: nVidia Corporation Device 007e (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 8, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport

00:07.0 PCI bridge: nVidia Corporation Device 007e (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 10, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport

00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 800MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000

00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5100 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81bc
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d5006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d5007000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: AMD_IDE
Kernel modules: pata_amd, amd74xx

00:0e.0 RAID bus controller: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: Memory at d5005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d3000000-d4ffffff
Prefetchable memory behind bridge: 80000000-800fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat+ DiscTmrSERREn-
Capabilities: [b8] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000

00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 818f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GT/GTO] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device c584
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at d2000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

06:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at d4000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
Kernel modules: r8169

\
 
 \ /
  Last update: 2009-12-22 17:47    [W:2.298 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site