lkml.org 
[lkml]   [2009]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/3] x86: remove MEMORY_HOTPLUG_RESERVE related code

after
| commit b263295dbffd33b0fbff670720fa178c30e3392a
| Author: Christoph Lameter <clameter@sgi.com>
| Date: Wed Jan 30 13:30:47 2008 +0100
|
| x86: 64-bit, make sparsemem vmemmap the only memory model

we don't have MEMORY_HOTPLUG_RESERVE anymore.

remove related dead code.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/include/asm/numa_64.h | 3 -
arch/x86/mm/numa_64.c | 5 --
arch/x86/mm/srat_64.c | 63 +++++++------------------------------
include/linux/mm.h | 2 -
mm/page_alloc.c | 69 -----------------------------------------
5 files changed, 12 insertions(+), 130 deletions(-)
Index: linux-2.6/arch/x86/include/asm/numa_64.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/numa_64.h
+++ linux-2.6/arch/x86/include/asm/numa_64.h
@@ -17,9 +17,6 @@ extern int compute_hash_shift(struct boo
extern void numa_init_array(void);
extern int numa_off;

-extern void srat_reserve_add_area(int nodeid);
-extern int hotadd_percent;
-
extern s16 apicid_to_node[MAX_LOCAL_APIC];

extern unsigned long numa_free_all_bootmem(void);
Index: linux-2.6/arch/x86/mm/numa_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/numa_64.c
+++ linux-2.6/arch/x86/mm/numa_64.c
@@ -272,9 +272,6 @@ void __init setup_node_bootmem(int nodei
reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start,
bootmap_pages<<PAGE_SHIFT, BOOTMEM_DEFAULT);

-#ifdef CONFIG_ACPI_NUMA
- srat_reserve_add_area(nodeid);
-#endif
node_set_online(nodeid);
}

@@ -608,8 +605,6 @@ static __init int numa_setup(char *opt)
#ifdef CONFIG_ACPI_NUMA
if (!strncmp(opt, "noacpi", 6))
acpi_numa = -1;
- if (!strncmp(opt, "hotadd=", 7))
- hotadd_percent = simple_strtoul(opt+7, NULL, 10);
#endif
return 0;
}
Index: linux-2.6/arch/x86/mm/srat_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/srat_64.c
+++ linux-2.6/arch/x86/mm/srat_64.c
@@ -31,8 +31,6 @@ static nodemask_t nodes_parsed __initdat
static nodemask_t cpu_nodes_parsed __initdata;
static struct bootnode nodes[MAX_NUMNODES] __initdata;
static struct bootnode nodes_add[MAX_NUMNODES];
-static int found_add_area __initdata;
-int hotadd_percent __initdata = 0;

static int num_node_memblks __initdata;
static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata;
@@ -66,9 +64,6 @@ static __init void cutoff_node(int i, un
{
struct bootnode *nd = &nodes[i];

- if (found_add_area)
- return;
-
if (nd->start < start) {
nd->start = start;
if (nd->end < nd->start)
@@ -86,7 +81,6 @@ static __init void bad_srat(void)
int i;
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
- found_add_area = 0;
for (i = 0; i < MAX_LOCAL_APIC; i++)
apicid_to_node[i] = NUMA_NO_NODE;
for (i = 0; i < MAX_NUMNODES; i++)
@@ -182,24 +176,21 @@ acpi_numa_processor_affinity_init(struct
pxm, apic_id, node);
}

-static int update_end_of_memory(unsigned long end) {return -1;}
-static int hotadd_enough_memory(struct bootnode *nd) {return 1;}
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
static inline int save_add_info(void) {return 1;}
#else
static inline int save_add_info(void) {return 0;}
#endif
/*
- * Update nodes_add and decide if to include add are in the zone.
- * Both SPARSE and RESERVE need nodes_add information.
- * This code supports one contiguous hot add area per node.
+ * Update nodes_add[]
+ * This code supports one contiguous hot add area per node
*/
-static int __init
-reserve_hotadd(int node, unsigned long start, unsigned long end)
+static void __init
+update_nodes_add(int node, unsigned long start, unsigned long end)
{
unsigned long s_pfn = start >> PAGE_SHIFT;
unsigned long e_pfn = end >> PAGE_SHIFT;
- int ret = 0, changed = 0;
+ int changed = 0;
struct bootnode *nd = &nodes_add[node];

/* I had some trouble with strange memory hotadd regions breaking
@@ -210,7 +201,7 @@ reserve_hotadd(int node, unsigned long s
mistakes */
if ((signed long)(end - start) < NODE_MIN_SIZE) {
printk(KERN_ERR "SRAT: Hotplug area too small\n");
- return -1;
+ return;
}

/* This check might be a bit too strict, but I'm keeping it for now. */
@@ -218,12 +209,7 @@ reserve_hotadd(int node, unsigned long s
printk(KERN_ERR
"SRAT: Hotplug area %lu -> %lu has existing memory\n",
s_pfn, e_pfn);
- return -1;
- }
-
- if (!hotadd_enough_memory(&nodes_add[node])) {
- printk(KERN_ERR "SRAT: Hotplug area too large\n");
- return -1;
+ return;
}

/* Looks good */
@@ -245,11 +231,9 @@ reserve_hotadd(int node, unsigned long s
printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
}

- ret = update_end_of_memory(nd->end);
-
if (changed)
- printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end);
- return ret;
+ printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
+ nd->start, nd->end);
}

/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
@@ -310,13 +294,10 @@ acpi_numa_memory_affinity_init(struct ac
start, end);
e820_register_active_regions(node, start >> PAGE_SHIFT,
end >> PAGE_SHIFT);
- push_node_boundaries(node, nd->start >> PAGE_SHIFT,
- nd->end >> PAGE_SHIFT);

- if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) &&
- (reserve_hotadd(node, start, end) < 0)) {
- /* Ignore hotadd region. Undo damage */
- printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
+ if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
+ update_nodes_add(node, start, end);
+ /* restore nodes[node] */
*nd = oldnode;
if ((nd->start | nd->end) == 0)
node_clear(node, nodes_parsed);
@@ -510,26 +491,6 @@ static int null_slit_node_compare(int a,
}
#endif /* CONFIG_NUMA_EMU */

-void __init srat_reserve_add_area(int nodeid)
-{
- if (found_add_area && nodes_add[nodeid].end) {
- u64 total_mb;
-
- printk(KERN_INFO "SRAT: Reserving hot-add memory space "
- "for node %d at %Lx-%Lx\n",
- nodeid, nodes_add[nodeid].start, nodes_add[nodeid].end);
- total_mb = (nodes_add[nodeid].end - nodes_add[nodeid].start)
- >> PAGE_SHIFT;
- total_mb *= sizeof(struct page);
- total_mb >>= 20;
- printk(KERN_INFO "SRAT: This will cost you %Lu MB of "
- "pre-allocated memory.\n", (unsigned long long)total_mb);
- reserve_bootmem_node(NODE_DATA(nodeid), nodes_add[nodeid].start,
- nodes_add[nodeid].end - nodes_add[nodeid].start,
- BOOTMEM_DEFAULT);
- }
-}
-
int __node_distance(int a, int b)
{
int index;
Index: linux-2.6/include/linux/mm.h
===================================================================
--- linux-2.6.orig/include/linux/mm.h
+++ linux-2.6/include/linux/mm.h
@@ -1032,8 +1032,6 @@ extern void add_active_range(unsigned in
unsigned long end_pfn);
extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
-extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn);
extern void remove_all_active_ranges(void);
extern unsigned long absent_pages_in_range(unsigned long start_pfn,
unsigned long end_pfn);
Index: linux-2.6/mm/page_alloc.c
===================================================================
--- linux-2.6.orig/mm/page_alloc.c
+++ linux-2.6/mm/page_alloc.c
@@ -150,10 +150,6 @@ static unsigned long __meminitdata dma_r
static int __meminitdata nr_nodemap_entries;
static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
- static unsigned long __meminitdata node_boundary_start_pfn[MAX_NUMNODES];
- static unsigned long __meminitdata node_boundary_end_pfn[MAX_NUMNODES];
-#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
static unsigned long __initdata required_kernelcore;
static unsigned long __initdata required_movablecore;
static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
@@ -3121,64 +3117,6 @@ void __init sparse_memory_present_with_a
}

/**
- * push_node_boundaries - Push node boundaries to at least the requested boundary
- * @nid: The nid of the node to push the boundary for
- * @start_pfn: The start pfn of the node
- * @end_pfn: The end pfn of the node
- *
- * In reserve-based hot-add, mem_map is allocated that is unused until hotadd
- * time. Specifically, on x86_64, SRAT will report ranges that can potentially
- * be hotplugged even though no physical memory exists. This function allows
- * an arch to push out the node boundaries so mem_map is allocated that can
- * be used later.
- */
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-void __init push_node_boundaries(unsigned int nid,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- mminit_dprintk(MMINIT_TRACE, "zoneboundary",
- "Entering push_node_boundaries(%u, %lu, %lu)\n",
- nid, start_pfn, end_pfn);
-
- /* Initialise the boundary for this node if necessary */
- if (node_boundary_end_pfn[nid] == 0)
- node_boundary_start_pfn[nid] = -1UL;
-
- /* Update the boundaries */
- if (node_boundary_start_pfn[nid] > start_pfn)
- node_boundary_start_pfn[nid] = start_pfn;
- if (node_boundary_end_pfn[nid] < end_pfn)
- node_boundary_end_pfn[nid] = end_pfn;
-}
-
-/* If necessary, push the node boundary out for reserve hotadd */
-static void __meminit account_node_boundary(unsigned int nid,
- unsigned long *start_pfn, unsigned long *end_pfn)
-{
- mminit_dprintk(MMINIT_TRACE, "zoneboundary",
- "Entering account_node_boundary(%u, %lu, %lu)\n",
- nid, *start_pfn, *end_pfn);
-
- /* Return if boundary information has not been provided */
- if (node_boundary_end_pfn[nid] == 0)
- return;
-
- /* Check the boundaries and update if necessary */
- if (node_boundary_start_pfn[nid] < *start_pfn)
- *start_pfn = node_boundary_start_pfn[nid];
- if (node_boundary_end_pfn[nid] > *end_pfn)
- *end_pfn = node_boundary_end_pfn[nid];
-}
-#else
-void __init push_node_boundaries(unsigned int nid,
- unsigned long start_pfn, unsigned long end_pfn) {}
-
-static void __meminit account_node_boundary(unsigned int nid,
- unsigned long *start_pfn, unsigned long *end_pfn) {}
-#endif
-
-
-/**
* get_pfn_range_for_nid - Return the start and end page frames for a node
* @nid: The nid to return the range for. If MAX_NUMNODES, the min and max PFN are returned.
* @start_pfn: Passed by reference. On return, it will have the node start_pfn.
@@ -3203,9 +3141,6 @@ void __meminit get_pfn_range_for_nid(uns

if (*start_pfn == -1UL)
*start_pfn = 0;
-
- /* Push the node boundaries out if requested */
- account_node_boundary(nid, start_pfn, end_pfn);
}

/*
@@ -3810,10 +3745,6 @@ void __init remove_all_active_ranges(voi
{
memset(early_node_map, 0, sizeof(early_node_map));
nr_nodemap_entries = 0;
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
- memset(node_boundary_start_pfn, 0, sizeof(node_boundary_start_pfn));
- memset(node_boundary_end_pfn, 0, sizeof(node_boundary_end_pfn));
-#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
}

/* Compare two active node_active_regions */

\
 
 \ /
  Last update: 2009-05-09 08:51    [from the cache]
©2003-2011 Jasper Spaans