lkml.org 
[lkml]   [2009]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 38/86] pata_it8213: fix PIO2 underclocking
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_it8213: fix PIO2 underclocking

[ port of Sergei's fixes for pata_efar from commit 5f33b3b ]

Fix the PIO mode 2 using mode 0 timings -- this driver should enable the
fast timing bank starting with PIO2, just like the PIIX/ICH drivers do.
Also, fix/rephrase some comments while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ata/pata_it8213.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

Index: b/drivers/ata/pata_it8213.c
===================================================================
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -92,18 +92,17 @@ static void it8213_set_piomode (struct a
{ 2, 1 },
{ 2, 3 }, };

- if (pio > 2)
- control |= 1; /* TIME1 enable */
+ if (pio > 1)
+ control |= 1; /* TIME */
if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */
- control |= 2; /* IORDY enable */
+ control |= 2; /* IE */
/* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */
if (adev->class != ATA_DEV_ATA)
- control |= 4;
+ control |= 4; /* PPE */

pci_read_config_word(dev, idetm_port, &idetm_data);

- /* Enable PPE, IE and TIME as appropriate */
-
+ /* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
idetm_data &= 0xCCF0;
idetm_data |= control;
@@ -122,7 +121,7 @@ static void it8213_set_piomode (struct a
pci_write_config_byte(dev, 0x44, slave_data);
}

- idetm_data |= 0x4000; /* Ensure SITRE is enabled */
+ idetm_data |= 0x4000; /* Ensure SITRE is set */
pci_write_config_word(dev, idetm_port, idetm_data);
}


\
 
 \ /
  Last update: 2009-11-25 18:55    [W:0.819 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site