lkml.org 
[lkml]   [2009]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] x86: move find_smp_config early

move find_smp_config calling before bootmem initialized.
use reserve_early instead of reserve_bootmem in it.

so could only call find_smp_config one time and remove unneeded reserve parameter

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/include/asm/mpspec.h | 11 ++--------
arch/x86/include/asm/x86_init.h | 2 -
arch/x86/kernel/apic/numaq_32.c | 5 ----
arch/x86/kernel/mpparse.c | 44 ++++++++++------------------------------
arch/x86/kernel/setup.c | 10 ++++-----
arch/x86/kernel/visws_quirks.c | 2 -
arch/x86/mm/k8topology_64.c | 12 ----------
7 files changed, 22 insertions(+), 64 deletions(-)

Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -71,12 +71,7 @@ static inline void early_get_smp_config(

static inline void find_smp_config(void)
{
- x86_init.mpparse.find_smp_config(1);
-}
-
-static inline void early_find_smp_config(void)
-{
- x86_init.mpparse.find_smp_config(0);
+ x86_init.mpparse.find_smp_config();
}

#ifdef CONFIG_X86_MPPARSE
@@ -89,7 +84,7 @@ extern void default_mpc_oem_bus_info(str
# else
# define default_mpc_oem_bus_info NULL
# endif
-extern void default_find_smp_config(unsigned int reserve);
+extern void default_find_smp_config(void);
extern void default_get_smp_config(unsigned int early);
#else
static inline void early_reserve_e820_mpc_new(void) { }
@@ -97,7 +92,7 @@ static inline void early_reserve_e820_mp
#define default_mpc_apic_id NULL
#define default_smp_read_mpc_oem NULL
#define default_mpc_oem_bus_info NULL
-#define default_find_smp_config x86_init_uint_noop
+#define default_find_smp_config x86_init_noop
#define default_get_smp_config x86_init_uint_noop
#endif

Index: linux-2.6/arch/x86/include/asm/x86_init.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/x86_init.h
+++ linux-2.6/arch/x86/include/asm/x86_init.h
@@ -26,7 +26,7 @@ struct x86_init_mpparse {
void (*smp_read_mpc_oem)(struct mpc_table *mpc);
void (*mpc_oem_pci_bus)(struct mpc_bus *m);
void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
- void (*find_smp_config)(unsigned int reserve);
+ void (*find_smp_config)(void);
void (*get_smp_config)(unsigned int early);
};

Index: linux-2.6/arch/x86/kernel/apic/numaq_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/numaq_32.c
+++ linux-2.6/arch/x86/kernel/apic/numaq_32.c
@@ -264,11 +264,6 @@ static void __init smp_read_mpc_oem(stru
static __init void early_check_numaq(void)
{
/*
- * Find possible boot-time SMP configuration:
- */
- early_find_smp_config();
-
- /*
* get boot-time SMP configuration:
*/
if (smp_found_config)
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -667,36 +667,18 @@ void __init default_get_smp_config(unsig
*/
}

-static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
+static void __init smp_reserve_memory(struct mpf_intel *mpf)
{
unsigned long size = get_mpc_size(mpf->physptr);
-#ifdef CONFIG_X86_32
- /*
- * We cannot access to MPC table to compute table size yet,
- * as only few megabytes from the bottom is mapped now.
- * PC-9800's MPC table places on the very last of physical
- * memory; so that simply reserving PAGE_SIZE from mpf->physptr
- * yields BUG() in reserve_bootmem.
- * also need to make sure physptr is below than max_low_pfn
- * we don't need reserve the area above max_low_pfn
- */
- unsigned long end = max_low_pfn * PAGE_SIZE;

- if (mpf->physptr < end) {
- if (mpf->physptr + size > end)
- size = end - mpf->physptr;
- reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
- }
-#else
- reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-#endif
+ reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
}

-static int __init smp_scan_config(unsigned long base, unsigned long length,
- unsigned reserve)
+static int __init smp_scan_config(unsigned long base, unsigned long length)
{
unsigned int *bp = phys_to_virt(base);
struct mpf_intel *mpf;
+ unsigned long mem;

apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
bp, length);
@@ -717,12 +699,10 @@ static int __init smp_scan_config(unsign
printk(KERN_INFO "found SMP MP-table at [%p] %llx\n",
mpf, (u64)virt_to_phys(mpf));

- if (!reserve)
- return 1;
- reserve_bootmem_generic(virt_to_phys(mpf), sizeof(*mpf),
- BOOTMEM_DEFAULT);
+ mem = virt_to_phys(mpf);
+ reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
if (mpf->physptr)
- smp_reserve_bootmem(mpf);
+ smp_reserve_memory(mpf);

return 1;
}
@@ -732,7 +712,7 @@ static int __init smp_scan_config(unsign
return 0;
}

-void __init default_find_smp_config(unsigned int reserve)
+void __init default_find_smp_config(void)
{
unsigned int address;

@@ -744,9 +724,9 @@ void __init default_find_smp_config(unsi
* 2) Scan the top 1K of base RAM
* 3) Scan the 64K of bios
*/
- if (smp_scan_config(0x0, 0x400, reserve) ||
- smp_scan_config(639 * 0x400, 0x400, reserve) ||
- smp_scan_config(0xF0000, 0x10000, reserve))
+ if (smp_scan_config(0x0, 0x400) ||
+ smp_scan_config(639 * 0x400, 0x400) ||
+ smp_scan_config(0xF0000, 0x10000))
return;
/*
* If it is an SMP machine we should know now, unless the
@@ -767,7 +747,7 @@ void __init default_find_smp_config(unsi

address = get_bios_ebda();
if (address)
- smp_scan_config(address, 0x400, reserve);
+ smp_scan_config(address, 0x400);
}

#ifdef CONFIG_X86_IO_APIC
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -946,6 +946,11 @@ void __init setup_arch(char **cmdline_p)

early_acpi_boot_init();

+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
@@ -960,11 +965,6 @@ void __init setup_arch(char **cmdline_p)

initmem_init(0, max_pfn, acpi, k8);

- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
-
reserve_crashkernel();

#ifdef CONFIG_X86_64
Index: linux-2.6/arch/x86/kernel/visws_quirks.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/visws_quirks.c
+++ linux-2.6/arch/x86/kernel/visws_quirks.c
@@ -197,7 +197,7 @@ static void __init MP_processor_info(str
apic_version[m->apicid] = ver;
}

-static void __init visws_find_smp_config(unsigned int reserve)
+static void __init visws_find_smp_config(void)
{
struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
Index: linux-2.6/arch/x86/mm/k8topology_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/k8topology_64.c
+++ linux-2.6/arch/x86/mm/k8topology_64.c
@@ -57,18 +57,6 @@ static __init void early_get_boot_cpu_id
* need to get boot_cpu_id so can use that to create apicid_to_node
* in k8_scan_nodes()
*/
- /*
- * Find possible boot-time SMP configuration:
- */
-#ifdef CONFIG_X86_MPPARSE
- early_find_smp_config();
-#endif
-#ifdef CONFIG_ACPI
- /*
- * Read APIC information from ACPI tables.
- */
- early_acpi_boot_init();
-#endif
#ifdef CONFIG_X86_MPPARSE
/*
* get boot-time SMP configuration:

\
 
 \ /
  Last update: 2009-11-22 10:19    [W:1.278 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site