lkml.org 
[lkml]   [2009]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlinux-next: manual merge of the net tree with the net-current tree
Hi all,

Today's linux-next merge of the net tree got a conflict in
drivers/net/can/Kconfig between commit
b93cf3f0bb45560d2ce62bdcc2181c40660cfdbf ("can: Fix driver Kconfig
structure") from the net-current tree and commits
3758bf25db8caeec667e4e56e030da0ec3060529 ("can: add TI CAN (HECC)
driver"), e0000163e30eeb112b41486ea113fd54f64e1f17 ("can: Driver for the
Microchip MCP251x SPI CAN controllers") and
afa17a500a3667f66df450100538d06769529bba ("net/can: add driver for mscan
family & mpc52xx_mscan") from the net tree.

I fixed it up (see below) and can carry the fix for a while. (I am not
sure the fix is entirely correct.)

--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au

diff --cc drivers/net/can/Kconfig
index 772f6d2,c16e6ff..0000000
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@@ -41,10 -95,38 +41,42 @@@ config CAN_AT9
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.

+ config CAN_TI_HECC
+ depends on CAN_DEV && ARCH_OMAP3
+ tristate "TI High End CAN Controller"
+ ---help---
+ Driver for TI HECC (High End CAN Controller) module found on many
+ TI devices. The device specifications are available from www.ti.com
+
+ config CAN_MCP251X
+ tristate "Microchip MCP251x SPI CAN controllers"
+ depends on CAN_DEV && SPI
+ ---help---
+ Driver for the Microchip MCP251x SPI CAN controllers.
+
+ config CAN_MSCAN
+ depends on CAN_DEV && (PPC || M68K || M68KNOMMU)
+ tristate "Support for Freescale MSCAN based chips"
+ ---help---
+ The Motorola Scalable Controller Area Network (MSCAN) definition
+ is based on the MSCAN12 definition which is the specific
+ implementation of the Motorola Scalable CAN concept targeted for
+ the Motorola MC68HC12 Microcontroller Family.
+
+ config CAN_MPC52XX
+ tristate "Freescale MPC5xxx onboard CAN controller"
+ depends on CAN_MSCAN && PPC_MPC52xx
+ ---help---
+ If you say yes here you get support for Freescale's MPC52xx
+ onboard dualCAN controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called mpc5xxx_can.
+
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN


\
 
 \ /
  Last update: 2009-11-17 03:19    [W:0.299 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site