lkml.org 
[lkml]   [2009]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] fix spidev compilation when VERBOSE is defined
Date
(please CC me as I am not subscribed to spi-devel-general).

When VERBOSE is defined in the spidev module, the compilation
will throw an error on 'spi' not being defined:

CC [M] drivers/spi/spidev.o
drivers/spi/spidev.c: In function 'spidev_message':
drivers/spi/spidev.c:266: error: 'spi' undeclared (first use in this function)
drivers/spi/spidev.c:266: error: (Each undeclared identifier is reported only once
drivers/spi/spidev.c:266: error: for each function it appears in.)

instead of using spi-> we should actually use spidev->spi.
This patch fixes the build failure.

CC: David Brownell <dbrownell@users.sourceforge.net>
CC: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
--
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4..c80c31b 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -262,15 +262,15 @@ static int spidev_message(struct spidev_data *spidev,
k_tmp->delay_usecs = u_tmp->delay_usecs;
k_tmp->speed_hz = u_tmp->speed_hz;
#ifdef VERBOSE
- dev_dbg(&spi->dev,
+ dev_dbg(&spidev->spi->dev,
" xfer len %zd %s%s%s%dbits %u usec %uHz\n",
u_tmp->len,
u_tmp->rx_buf ? "rx " : "",
u_tmp->tx_buf ? "tx " : "",
u_tmp->cs_change ? "cs " : "",
- u_tmp->bits_per_word ? : spi->bits_per_word,
+ u_tmp->bits_per_word ? : spidev->spi->bits_per_word,
u_tmp->delay_usecs,
- u_tmp->speed_hz ? : spi->max_speed_hz);
+ u_tmp->speed_hz ? : spidev->spi->max_speed_hz);
#endif
spi_message_add_tail(k_tmp, &msg);
}


\
 
 \ /
  Last update: 2009-10-06 18:11    [W:0.039 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site