Messages in this thread | | | Date | Thu, 4 Sep 2008 01:25:44 -0700 | From | Andrew Morton <> | Subject | Re: linux-next: Tree for September 3 |
| |
On Thu, 4 Sep 2008 01:02:10 -0700 (PDT) Linus Torvalds <torvalds@linux-foundation.org> wrote:
> So this all looks ok. I'd be happier if you also actually had some actual > _device_ in the Cardbus slot and reported that that works, but the patch > clearly
<rummages for ten minutes>
<found it!>
<plugs it in>
cs: pcmcia_socket0: unable to apply power. pccard: CardBus card inserted into slot 0 pci 0000:07:00.0: supports D1 pci 0000:07:00.0: supports D2 pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:07:00.0: PME# disabled
sony:/home/akpm> lspci -s07:00 07:00.0 Ethernet controller: 3Com Corporation 3cCFE575CT CardBus [Cyclone] (rev 10)
seems OK.
<applies the patch, enables 3c59x.ko>
<reboots, plugs in card>
cs: pcmcia_socket0: unable to apply power. pccard: CardBus card inserted into slot 0 pci 0000:07:00.0: supports D1 pci 0000:07:00.0: supports D2 pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:07:00.0: PME# disabled calling vortex_init+0x0/0x9e [3c59x] 3c59x 0000:07:00.0: enabling device (0000 -> 0003) 3c59x 0000:07:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 3c59x: Donald Becker and others. 0000:07:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at f8cb2000. 3c59x 0000:07:00.0: setting latency timer to 64 initcall vortex_init+0x0/0x9e [3c59x] returned 0 after 36 msecs
can't complain about that, apart from the apparently-bogus "unable to apply power".
| |