lkml.org 
[lkml]   [2008]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 01/10] ide: add ide_drive_t.dma flag
Date
From
This flag is to accomodate ide-cd functionality into ide atapi.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 9 +++++----
include/linux/ide.h | 1 +
2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index a1d8c35..d557841 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -545,7 +545,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
u16 bcount;
- u8 dma = 0, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
+ u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);

/* We haven't transferred any data yet */
pc->xferred = 0;
@@ -566,15 +566,16 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
(drive->dev_flags & IDE_DFLAG_USING_DMA)) {
if (scsi)
hwif->sg_mapped = 1;
- dma = !hwif->dma_ops->dma_setup(drive);
+ drive->dma = !hwif->dma_ops->dma_setup(drive);
if (scsi)
hwif->sg_mapped = 0;
}

- if (!dma)
+ if (!drive->dma)
pc->flags &= ~PC_FLAG_DMA_OK;

- ide_pktcmd_tf_load(drive, scsi ? 0 : IDE_TFLAG_OUT_DEVICE, bcount, dma);
+ ide_pktcmd_tf_load(drive, scsi ? 0 : IDE_TFLAG_OUT_DEVICE, bcount,
+ drive->dma);

/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 540959f..7c1b00a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -601,6 +601,7 @@ struct ide_drive_s {
u8 select; /* basic drive/head select reg value */
u8 retry_pio; /* retrying dma capable host in pio */
u8 waiting_for_dma; /* dma currently in progress */
+ u8 dma; /* atapi dma flag */

u8 quirk_list; /* considered quirky, set for a specific host */
u8 init_speed; /* transfer rate set at boot */
--
1.5.5.1


\
 
 \ /
  Last update: 2008-09-14 13:39    [W:0.243 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site