lkml.org 
[lkml]   [2008]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 03/10] ide-atapi: teach ide atapi about drive->waiting_for_dma
Date
From
This is in preparation for converting ide-cd to generic code. The actual
rewiring will be done later after the issue_pc/transfer_pc code knows all about
ide-cd.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 16 +++++++++++++---
1 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index d557841..763acd7 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -487,7 +487,13 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
ide_startstop_t startstop;
u8 ireason;

- if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
+ if ((drive->media == ide_cdrom || drive->media == ide_optical) &&
+ (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT)) {
+ if (drive->dma)
+ drive->waiting_for_dma = 1;
+ }
+ else if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY,
+ WAIT_READY)) {
printk(KERN_ERR "%s: Strange, packet command initiated yet "
"DRQ isn't asserted\n", drive->name);
return startstop;
@@ -562,8 +568,10 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
ide_dma_off(drive);
}

- if ((pc->flags & PC_FLAG_DMA_OK) &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+ if (((pc->flags & PC_FLAG_DMA_OK) &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
+ ((drive->media == ide_cdrom || drive->media == ide_optical) &&
+ drive->dma)) {
if (scsi)
hwif->sg_mapped = 1;
drive->dma = !hwif->dma_ops->dma_setup(drive);
@@ -579,6 +587,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,

/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 0;
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
timeout, NULL);
return ide_started;
--
1.5.5.1


\
 
 \ /
  Last update: 2008-09-14 13:39    [W:0.204 / U:0.272 seconds]
©2003-2014 Jasper Spaans. Advertise on this site