lkml.org 
[lkml]   [2008]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/16] x86: merge 64bit setup_arch into setup_32
Date

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

Index: linux-2.6/arch/x86/kernel/setup_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_32.c
+++ linux-2.6/arch/x86/kernel/setup_32.c
@@ -372,26 +372,38 @@ static void __init reserve_initrd(void)
* global efi_enabled. This allows the same kernel image to be used on existing
* systems (with a traditional BIOS) as well as on EFI systems.
*/
+/*
+ * setup_arch - architecture-specific boot-time initializations
+ *
+ * Note: On x86_64, fixmaps are ready for use even before this is called.
+ */
+
void __init setup_arch(char **cmdline_p)
{
+#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
pre_setup_arch_hook();
early_cpu_init();
early_ioremap_init();
reserve_setup_data();
+#else
+ printk(KERN_INFO "Command line: %s\n", boot_command_line);
+#endif

ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
screen_info = boot_params.screen_info;
edid_info = boot_params.edid_info;
+#ifdef CONFIG_X86_32
apm_info.bios = boot_params.apm_bios_info;
ist_info = boot_params.ist_info;
- saved_video_mode = boot_params.hdr.vid_mode;
- if( boot_params.sys_desc_table.length != 0 ) {
+ if (boot_params.sys_desc_table.length != 0) {
set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
machine_id = boot_params.sys_desc_table.table[0];
machine_submodel_id = boot_params.sys_desc_table.table[1];
BIOS_revision = boot_params.sys_desc_table.table[2];
}
+#endif
+ saved_video_mode = boot_params.hdr.vid_mode;
bootloader_type = boot_params.hdr.type_of_loader;

#ifdef CONFIG_BLK_DEV_RAM
@@ -401,7 +413,12 @@ void __init setup_arch(char **cmdline_p)
#endif
#ifdef CONFIG_EFI
if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
- "EL32", 4)) {
+#ifdef CONFIG_X86_32
+ "EL32",
+#else
+ "EL64",
+#endif
+ 4)) {
efi_enabled = 1;
efi_reserve_early();
}
@@ -417,7 +434,11 @@ void __init setup_arch(char **cmdline_p)
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
+#ifdef CONFIG_X86_32
init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+#else
+ init_mm.brk = (unsigned long) &_end;
+#endif

code_resource.start = virt_to_phys(_text);
code_resource.end = virt_to_phys(_etext)-1;
@@ -426,6 +447,9 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;

+#ifdef CONFIG_X86_64
+ early_cpu_init();
+#endif
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;

@@ -433,16 +457,27 @@ void __init setup_arch(char **cmdline_p)

parse_early_param();

- if (acpi_mps_check()){
+ if (acpi_mps_check()) {
#ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_32
enable_local_apic = -1;
+#else
+ disable_apic = 1;
+#endif
#endif
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
}

finish_e820_parsing();

+#ifdef CONFIG_X86_32
probe_roms();
+#else
+# ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ if (init_ohci1394_dma_early)
+ init_ohci1394_dma_on_all_controllers();
+# endif
+#endif

/* after parse_early_param, so could debug it */
insert_resource(&iomem_resource, &code_resource);
@@ -452,6 +487,7 @@ void __init setup_arch(char **cmdline_p)
if (efi_enabled)
efi_init();

+#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
E820_RESERVED);
@@ -459,6 +495,9 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "fixed physical RAM map:\n");
e820_print_map("bad_ppro");
}
+#else
+ early_gart_iommu_check();
+#endif

e820_register_active_regions(0, 0, -1UL);
/*
@@ -477,14 +516,32 @@ void __init setup_arch(char **cmdline_p)
max_pfn = e820_end_of_ram();
}

+#ifdef CONFIG_X86_32
/* max_low_pfn get updated here */
find_low_pfn_range();
+#else
+ num_physpages = max_pfn;
+
+ check_efer();
+
+ /* How many end-of-memory variables you have, grandma! */
+ /* need this before calling reserve_initrd */
+ max_low_pfn = max_pfn;
+ high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+#endif

/* max_pfn_mapped is updated here */
+#ifdef CONFIG_X86_64
+ max_pfn_mapped =
+#endif
init_memory_mapping(0, (max_low_pfn << PAGE_SHIFT));

reserve_initrd();

+#ifdef CONFIG_X86_64
+ vsmp_init();
+#endif
+
dmi_scan_machine();

io_delay_init();
@@ -494,6 +551,11 @@ void __init setup_arch(char **cmdline_p)
*/
acpi_boot_table_init();

+#ifdef CONFIG_X86_64
+ /* Remove active ranges so rediscovery with NUMA-awareness happens */
+ remove_all_active_ranges();
+#endif
+
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
@@ -503,13 +565,18 @@ void __init setup_arch(char **cmdline_p)

initmem_init(0, max_pfn);

+#ifdef CONFIG_X86_64
+ dma32_reserve_bootmem();
+#endif
+
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
*/
acpi_reserve_bootmem();
#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
+#if defined(CONFIG_X86_FIND_SMP_CONFIG) && defined(CONFIG_X86_32) || \
+ defined(CONFIG_X86_MPPARSE) && defined(CONFIG_X86_64)
/*
* Find and reserve possible boot-time SMP configuration:
*/
@@ -523,7 +590,7 @@ void __init setup_arch(char **cmdline_p)
kvmclock_init();
#endif

-#ifdef CONFIG_VMI
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be after max_low_pfn is determined, and before kernel
* pagetables are setup.
@@ -533,11 +600,15 @@ void __init setup_arch(char **cmdline_p)

paging_init();

+#ifdef CONFIG_X86_64
+ map_vsyscall();
+#endif
+
/*
* NOTE: On x86-32, only from this point on, fixmaps are ready for use.
*/

-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+#if defined(CONFIG_PROVIDE_OHCI1394_DMA_INIT) && defined(CONFIG_X86_32)
if (init_ohci1394_dma_early)
init_ohci1394_dma_on_all_controllers();
#endif
@@ -553,6 +624,10 @@ void __init setup_arch(char **cmdline_p)
*/
acpi_boot_init();

+#ifdef CONFIG_X86_64
+ init_cpu_to_node();
+#endif
+
#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
/*
* get boot-time SMP configuration:
@@ -560,18 +635,26 @@ void __init setup_arch(char **cmdline_p)
if (smp_found_config)
get_smp_config();
#endif
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+
+#ifdef CONFIG_X86_64
+ init_apic_mappings();
+ ioapic_init_mappings();
+#else
+# if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
if (def_to_bigsmp)
printk(KERN_WARNING "More than 8 CPUs detected and "
"CONFIG_X86_PC cannot handle it.\nUse "
"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+# endif
#endif
kvm_guest_init();

e820_reserve_resources();
e820_mark_nosave_regions(max_low_pfn);

+#ifdef CONFIG_X86_32
request_resource(&iomem_resource, &video_ram_resource);
+#endif
reserve_standard_io_resources();

e820_setup_gap();

\
 
 \ /
  Last update: 2008-06-26 03:07    [W:0.796 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site