lkml.org 
[lkml]   [2008]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 2.6.26-rc5: CFI: Found no ck804xrom @ffc00000 device at location zero
Hi John,

On Thu, 12 Jun 2008 14:34:36 -0400, John Stoffel wrote:
> I'm running a AMD X2 box with 4gb of RAM, Ubuntu 8.04 x86_64. I just
> rebooted the system and I notice the following repeated messages
> (errors? warnings?) in my dmesg output. I think this is from my
> nForce ethernet chips, but I'm not sure.
>
> [ 13.268005] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
> [ 13.336752] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
> [ 13.336786] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
> [ 13.376771] CFI: Found no ck804xrom @ffc00000 device at location zero
> [ 13.398810] JEDEC: Found no ck804xrom @ffc00000 device at location zero
> (...)

Definitely not related to i2c.

Apparently the messages are coming from drivers/mtd/chips/gen_probe.c.
So I doubt it is related to networking either...

They are debugging messages, but printk(KERN_DEBUG ...) is used where
pr_debug(...) should be. The following (untested) patch should fix it:

Subject: [MTD] No debug message when debugging is disabled

Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message
is only printed when debugging is enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
drivers/mtd/chips/gen_probe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- linux-2.6.26-rc5.orig/drivers/mtd/chips/gen_probe.c 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.26-rc5/drivers/mtd/chips/gen_probe.c 2008-06-12 22:20:12.000000000 +0200
@@ -71,8 +71,8 @@ static struct cfi_private *genprobe_iden
interleave and device type, etc. */
if (!genprobe_new_chip(map, cp, &cfi)) {
/* The probe didn't like it */
- printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
- cp->name, map->name);
+ pr_debug("%s: Found no %s device at location zero\n",
+ cp->name, map->name);
return NULL;
}


--
Jean Delvare


\
 
 \ /
  Last update: 2008-06-12 22:27    [W:0.124 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site