Messages in this thread | | | Subject | [BUG] Sky2 driver in 2.6.22-rc5-git1-cfs-v17 | From | Ian Kumlien <> | Date | Thu, 21 Jun 2007 22:51:32 +0200 |
| |
Hi,
recently have started to see this in my dmesg:
NETDEV WATCHDOG: eth0: transmit timed out sky2 eth0: tx timeout sky2 eth0: transmit ring 449 .. 408 report=449 done=449 sky2 eth0: disabling interface sky2 eth0: enabling interface sky2 eth0: ram buffer 48K sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
I'm not using MSI since it seems to have caused problems in the past.
I run with a 9k mtu
sky2 eth0: transmit ring 18 .. 489 report=18 done=18 ---- I assume ring max is 512 (ie 1-512) since: Ring parameters for eth0: Current hardware settings: RX: 168 RX Mini: 0 RX Jumbo: 0 TX: 511 And 489 + 41 - 18 = 512
sky2 eth0: transmit ring 197 .. 156 report=197 done=197 sky2 eth0: transmit ring 480 .. 439 report=480 done=480 sky2 eth0: transmit ring 413 .. 372 report=413 done=413 sky2 eth0: transmit ring 320 .. 279 report=320 done=320
Else, they are all off by 41.
Is this a known bug? Comments? ideas?
Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off
-- Ian Kumlien <pomac (a) vapor ! com> -- http://pomac.netswarm.net [unhandled content-type:application/pgp-signature] | |