lkml.org 
[lkml]   [2007]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 14/21] KGDB: KGDB arch support for ARM
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
arm-lite.patch

From: Jason Wessel <jason.wessel@windriver.com>
CC: linux-arm-kernel@lists.arm.linux.org.uk
Subject: [PATCH] KGDB arch support for ARM

This adds a backend, written by Deepak Saxena <dsaxena@plexity.net>
and George Davis <gdavis@mvista.com> as well as support for the TI
OMAP boards, ADI Coyote, PXA2xx, ARM Versatile and PNX4008. Geoff
Levand <geoffrey.levand@am.sony.com>, Nicolas Pitre, and Manish
Lachwani have contributed various fixups here as well. This should
only require (on boards that don't have a custom uart) registering the
uart with KGDB to add any other boards, or using kgdboe it should Just
Work.

Signed-off-by: Milind Dumbare <milind@linsyssoft.com>
Signed-off-by: Dmitry Antipov <antipov@ru.mvista.com>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/arm/kernel/Makefile | 1
arch/arm/kernel/kgdb-jmp.S | 32 +++++
arch/arm/kernel/kgdb.c | 207 +++++++++++++++++++++++++++++++++++
arch/arm/kernel/setup.c | 5
arch/arm/kernel/traps.c | 11 +
arch/arm/mach-ixp2000/core.c | 4
arch/arm/mach-ixp2000/ixdp2x01.c | 6 +
arch/arm/mach-ixp4xx/coyote-setup.c | 4
arch/arm/mach-ixp4xx/ixdp425-setup.c | 21 ++-
arch/arm/mach-omap1/serial.c | 4
arch/arm/mach-pnx4008/core.c | 4
arch/arm/mach-pxa/Makefile | 1
arch/arm/mach-pxa/kgdb-serial.c | 97 ++++++++++++++++
arch/arm/mach-versatile/core.c | 8 +
arch/arm/mm/extable.c | 7 +
drivers/serial/Makefile | 1
drivers/serial/amba-pl011.c | 3
drivers/serial/pl011_kgdb.c | 117 +++++++++++++++++++
drivers/serial/pxa.c | 5
include/asm-arm/kgdb.h | 103 +++++++++++++++++
lib/Kconfig.kgdb | 55 ++++++++-
21 files changed, 689 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/kernel/kgdb-jmp.S
create mode 100644 arch/arm/kernel/kgdb.c
create mode 100644 arch/arm/mach-pxa/kgdb-serial.c
create mode 100644 drivers/serial/pl011_kgdb.c
create mode 100644 include/asm-arm/kgdb.h

--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
+obj-$(CONFIG_KGDB) += kgdb.o kgdb-jmp.o

obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
--- /dev/null
+++ b/arch/arm/kernel/kgdb-jmp.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/kernel/kgdb-jmp.S
+ *
+ * Trivial setjmp and longjmp procedures to support bus error recovery
+ * which may occur during kgdb memory read/write operations.
+ *
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * source@mvista.com
+ *
+ * 2002-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program as licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+#include <linux/linkage.h>
+
+ENTRY (kgdb_fault_setjmp)
+ /* Save registers */
+ stmia r0, {r0-r14}
+ str lr,[r0, #60]
+ mrs r1,cpsr
+ str r1,[r0,#64]
+ ldr r1,[r0,#4]
+ mov r0, #0
+ mov pc,lr
+
+ENTRY (kgdb_fault_longjmp)
+ /* Restore registers */
+ mov r1,#1
+ str r1,[r0]
+ ldr r1,[r0, #64]
+ msr spsr,r1
+ ldmia r0,{r0-pc}^
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ *
+ * Authors: George Davis <davis_g@mvista.com>
+ * Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+
+#include <asm/atomic.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+ int regno;
+
+ /* Initialize all to zero (??) */
+ for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ gdb_regs[regno] = 0;
+
+ gdb_regs[_R0] = kernel_regs->ARM_r0;
+ gdb_regs[_R1] = kernel_regs->ARM_r1;
+ gdb_regs[_R2] = kernel_regs->ARM_r2;
+ gdb_regs[_R3] = kernel_regs->ARM_r3;
+ gdb_regs[_R4] = kernel_regs->ARM_r4;
+ gdb_regs[_R5] = kernel_regs->ARM_r5;
+ gdb_regs[_R6] = kernel_regs->ARM_r6;
+ gdb_regs[_R7] = kernel_regs->ARM_r7;
+ gdb_regs[_R8] = kernel_regs->ARM_r8;
+ gdb_regs[_R9] = kernel_regs->ARM_r9;
+ gdb_regs[_R10] = kernel_regs->ARM_r10;
+ gdb_regs[_FP] = kernel_regs->ARM_fp;
+ gdb_regs[_IP] = kernel_regs->ARM_ip;
+ gdb_regs[_SP] = kernel_regs->ARM_sp;
+ gdb_regs[_LR] = kernel_regs->ARM_lr;
+ gdb_regs[_PC] = kernel_regs->ARM_pc;
+ gdb_regs[_CPSR] = kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+ kernel_regs->ARM_r0 = gdb_regs[_R0];
+ kernel_regs->ARM_r1 = gdb_regs[_R1];
+ kernel_regs->ARM_r2 = gdb_regs[_R2];
+ kernel_regs->ARM_r3 = gdb_regs[_R3];
+ kernel_regs->ARM_r4 = gdb_regs[_R4];
+ kernel_regs->ARM_r5 = gdb_regs[_R5];
+ kernel_regs->ARM_r6 = gdb_regs[_R6];
+ kernel_regs->ARM_r7 = gdb_regs[_R7];
+ kernel_regs->ARM_r8 = gdb_regs[_R8];
+ kernel_regs->ARM_r9 = gdb_regs[_R9];
+ kernel_regs->ARM_r10 = gdb_regs[_R10];
+ kernel_regs->ARM_fp = gdb_regs[_FP];
+ kernel_regs->ARM_ip = gdb_regs[_IP];
+ kernel_regs->ARM_sp = gdb_regs[_SP];
+ kernel_regs->ARM_lr = gdb_regs[_LR];
+ kernel_regs->ARM_pc = gdb_regs[_PC];
+ kernel_regs->ARM_cpsr = gdb_regs[_CPSR];
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs,
+ struct task_struct *task)
+{
+ int regno;
+ struct pt_regs *thread_regs;
+
+ /* Just making sure... */
+ if (task == NULL)
+ return;
+
+ /* Initialize to zero */
+ for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ gdb_regs[regno] = 0;
+
+ /* Otherwise, we have only some registers from switch_to() */
+ thread_regs = task_pt_regs(task);
+ gdb_regs[_R0] = thread_regs->ARM_r0; /* Not really valid? */
+ gdb_regs[_R1] = thread_regs->ARM_r1; /* " " */
+ gdb_regs[_R2] = thread_regs->ARM_r2; /* " " */
+ gdb_regs[_R3] = thread_regs->ARM_r3; /* " " */
+ gdb_regs[_R4] = thread_regs->ARM_r4;
+ gdb_regs[_R5] = thread_regs->ARM_r5;
+ gdb_regs[_R6] = thread_regs->ARM_r6;
+ gdb_regs[_R7] = thread_regs->ARM_r7;
+ gdb_regs[_R8] = thread_regs->ARM_r8;
+ gdb_regs[_R9] = thread_regs->ARM_r9;
+ gdb_regs[_R10] = thread_regs->ARM_r10;
+ gdb_regs[_FP] = thread_regs->ARM_fp;
+ gdb_regs[_IP] = thread_regs->ARM_ip;
+ gdb_regs[_SP] = thread_regs->ARM_sp;
+ gdb_regs[_LR] = thread_regs->ARM_lr;
+ gdb_regs[_PC] = thread_regs->ARM_pc;
+ gdb_regs[_CPSR] = thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+ int err_code, char *remcom_in_buffer,
+ char *remcom_out_buffer,
+ struct pt_regs *linux_regs)
+{
+ long addr;
+ char *ptr;
+
+ switch (remcom_in_buffer[0]) {
+ case 'D':
+ case 'k':
+ case 'c':
+ kgdb_contthread = NULL;
+
+ /*
+ * Try to read optional parameter, pc unchanged if no parm.
+ * If this was a compiled breakpoint, we need to move
+ * to the next instruction or we will just breakpoint
+ * over and over again.
+ */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr)) {
+ linux_regs->ARM_pc = addr;
+ } else if (compiled_break == 1) {
+ linux_regs->ARM_pc += 4;
+ }
+
+ compiled_break = 0;
+
+ return 0;
+ }
+
+ return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+ if (!kgdb_io_ops.read_char)
+ return 1;
+
+ kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+ return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+ if (!kgdb_io_ops.read_char)
+ return 1;
+
+ compiled_break = 1;
+ kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+ return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KGDB_BREAKINST,
+ .fn = kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KGDB_COMPILED_BREAK,
+ .fn = kgdb_compiled_brk_fn
+};
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+int kgdb_arch_init(void)
+{
+ register_undef_hook(&kgdb_brkpt_hook);
+ register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+ return 0;
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+ .gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+ .gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -837,6 +837,11 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
+
+#if defined(CONFIG_KGDB)
+ extern void __init early_trap_init(void);
+ early_trap_init();
+#endif
}


--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -302,6 +302,7 @@ asmlinkage void __exception do_undefinst
unsigned int instr;
struct undef_hook *hook;
siginfo_t info;
+ mm_segment_t fs;
void __user *pc;
unsigned long flags;

@@ -312,6 +313,8 @@ asmlinkage void __exception do_undefinst
*/
regs->ARM_pc -= correction;

+ fs = get_fs();
+ set_fs(KERNEL_DS);
pc = (void __user *)instruction_pointer(regs);

if (processor_mode(regs) == SVC_MODE) {
@@ -321,6 +324,7 @@ asmlinkage void __exception do_undefinst
} else {
get_user(instr, (u32 __user *)pc);
}
+ set_fs(fs);

spin_lock_irqsave(&undef_lock, flags);
list_for_each_entry(hook, &undef_hook, node) {
@@ -706,6 +710,13 @@ EXPORT_SYMBOL(abort);

void __init trap_init(void)
{
+#if defined(CONFIG_KGDB)
+ return;
+}
+
+void __init early_trap_init(void)
+{
+#endif
unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -25,6 +25,7 @@
#include <linux/bitops.h>
#include <linux/serial_8250.h>
#include <linux/mm.h>
+#include <linux/kgdb.h>

#include <asm/types.h>
#include <asm/setup.h>
@@ -184,6 +185,9 @@ static struct platform_device ixp2000_se
void __init ixp2000_uart_init(void)
{
platform_device_register(&ixp2000_serial_device);
+#ifdef CONFIG_KGDB_8250
+ kgdb8250_add_platform_port(0, &ixp2000_serial_port);
+#endif
}


--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -30,6 +30,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/kgdb.h>

#include <asm/io.h>
#include <asm/irq.h>
@@ -413,6 +414,11 @@ static void __init ixdp2x01_init_machine
platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
ixp2000_uart_init();
ixdp2x01_uart_init();
+
+#ifdef CONFIG_KGDB_8250
+ kgdb8250_add_platform_port(0, ixdp2x01_serial_port1);
+ kgdb8250_add_platform_port(1, ixdp2x01_serial_port1);
+#endif
}


--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -96,6 +96,10 @@ static void __init coyote_init(void)
}

platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
+
+#ifdef CONFIG_KGDB_8250
+ kgdb8250_add_platform_port(0, &coyote_uart_data);
+#endif
}

#ifdef CONFIG_ARCH_ADI_COYOTE
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/kgdb.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
@@ -152,7 +153,8 @@ static struct plat_serial8250_port ixdp4
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_SHARE_IRQ,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
@@ -161,7 +163,8 @@ static struct plat_serial8250_port ixdp4
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_SHARE_IRQ,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
@@ -219,12 +222,22 @@ static void __init ixdp425_init(void)
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
}

+static void __init ixdp425_map_io(void)
+{
+ ixp4xx_map_io();
+
+#ifdef CONFIG_KGDB_8250
+ kgdb8250_add_platform_port(0, &ixdp425_uart_data[0]);
+ kgdb8250_add_platform_port(1, &ixdp425_uart_data[1]);
+#endif
+}
+
#ifdef CONFIG_ARCH_IXDP425
MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- .map_io = ixp4xx_map_io,
+ .map_io = ixdp425_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
@@ -237,7 +250,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 De
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- .map_io = ixp4xx_map_io,
+ .map_io = ixdp425_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>
+#include <linux/kgdb.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
@@ -199,6 +200,9 @@ void __init omap_serial_init(void)
break;
}
omap_serial_reset(&serial_platform_data[i]);
+#ifdef CONFIG_KGDB_8250
+ kgdb8250_add_platform_port(i, &serial_platform_data[i]);
+#endif
}
}

--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -224,6 +224,10 @@ static void __init pnx4008_init(void)
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
/* Switch on the UART clocks */
pnx4008_uart_init();
+#ifdef CONFIG_KGDB_8250
+ kgdb8250_add_platform_port(0, &platform_serial_ports[0]);
+ kgdb8250_add_platform_port(1, &platform_serial_ports[1]);
+#endif
}

static struct map_desc pnx4008_io_desc[] __initdata = {
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS) += $(led-y)
# Misc features
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_PXA_SSP) += ssp.o
+obj-$(CONFIG_KGDB_PXA_SERIAL) += kgdb-serial.o

ifeq ($(CONFIG_PXA27x),y)
obj-$(CONFIG_PM) += standby.o
--- /dev/null
+++ b/arch/arm/mach-pxa/kgdb-serial.c
@@ -0,0 +1,97 @@
+/*
+ * linux/arch/arm/mach-pxa/kgdb-serial.c
+ *
+ * Provides low level kgdb serial support hooks for PXA2xx boards
+ *
+ * Author: Nicolas Pitre
+ * Copyright: (C) 2002-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/kgdb.h>
+#include <asm/processor.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+
+#if defined(CONFIG_KGDB_PXA_FFUART)
+
+#define UART FFUART
+#define CKEN_UART CKEN6_FFUART
+#define GPIO_RX_MD GPIO34_FFRXD_MD
+#define GPIO_TX_MD GPIO39_FFTXD_MD
+
+#elif defined(CONFIG_KGDB_PXA_BTUART)
+
+#define UART BTUART
+#define CKEN_UART CKEN7_BTUART
+#define GPIO_RX_MD GPIO42_BTRXD_MD
+#define GPIO_TX_MD GPIO43_BTTXD_MD
+
+#elif defined(CONFIG_KGDB_PXA_STUART)
+
+#define UART STUART
+#define CKEN_UART CKEN5_STUART
+#define GPIO_RX_MD GPIO46_STRXD_MD
+#define GPIO_TX_MD GPIO47_STTXD_MD
+
+#endif
+
+#define UART_BAUDRATE (CONFIG_KGDB_BAUDRATE)
+
+static volatile unsigned long *port = (unsigned long *)&UART;
+
+static int kgdb_serial_init(void)
+{
+ pxa_set_cken(CKEN_UART, 1);
+ pxa_gpio_mode(GPIO_RX_MD);
+ pxa_gpio_mode(GPIO_TX_MD);
+
+ port[UART_IER] = 0;
+ port[UART_LCR] = LCR_DLAB;
+ port[UART_DLL] = ((921600 / UART_BAUDRATE) & 0xff);
+ port[UART_DLM] = ((921600 / UART_BAUDRATE) >> 8);
+ port[UART_LCR] = LCR_WLS1 | LCR_WLS0;
+ port[UART_MCR] = 0;
+ port[UART_IER] = IER_UUE;
+ port[UART_FCR] = FCR_ITL_16;
+
+ return 0;
+}
+
+static void kgdb_serial_putchar(u8 c)
+{
+ if (!(CKEN & CKEN_UART) || port[UART_IER] != IER_UUE)
+ kgdb_serial_init();
+ while (!(port[UART_LSR] & LSR_TDRQ))
+ cpu_relax();
+ port[UART_TX] = c;
+}
+
+static void kgdb_serial_flush(void)
+{
+ if ((CKEN & CKEN_UART) && (port[UART_IER] & IER_UUE))
+ while (!(port[UART_LSR] & LSR_TEMT))
+ cpu_relax();
+}
+
+static int kgdb_serial_getchar(void)
+{
+ unsigned char c;
+ if (!(CKEN & CKEN_UART) || port[UART_IER] != IER_UUE)
+ kgdb_serial_init();
+ while (!(port[UART_LSR] & UART_LSR_DR))
+ cpu_relax();
+ c = port[UART_RX];
+ return c;
+}
+
+struct kgdb_io kgdb_io_ops = {
+ .init = kgdb_serial_init,
+ .write_char = kgdb_serial_putchar,
+ .flush = kgdb_serial_flush,
+ .read_char = kgdb_serial_getchar,
+};
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -184,6 +184,14 @@ static struct map_desc versatile_io_desc
.type = MT_DEVICE
},
#endif
+#ifdef CONFIG_KGDB_AMBA_PL011
+ {
+ .virtual = IO_ADDRESS(CONFIG_KGDB_AMBA_BASE),
+ .pfn = __phys_to_pfn(CONFIG_KGDB_AMBA_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
+#endif
#ifdef CONFIG_PCI
{
.virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
--- a/arch/arm/mm/extable.c
+++ b/arch/arm/mm/extable.c
@@ -2,6 +2,7 @@
* linux/arch/arm/mm/extable.c
*/
#include <linux/module.h>
+#include <linux/kgdb.h>
#include <asm/uaccess.h>

int fixup_exception(struct pt_regs *regs)
@@ -11,6 +12,12 @@ int fixup_exception(struct pt_regs *regs
fixup = search_exception_tables(instruction_pointer(regs));
if (fixup)
regs->ARM_pc = fixup->fixup;
+#ifdef CONFIG_KGDB
+ if (atomic_read(&debugger_active) && kgdb_may_fault)
+ /* Restore our previous state. */
+ kgdb_fault_longjmp(kgdb_fault_jmp_regs);
+ /* Not reached. */
+#endif

return fixup != NULL;
}
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mc
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+obj-$(CONFIG_KGDB_AMBA_PL011) += pl011_kgdb.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -332,7 +332,8 @@ static int pl011_startup(struct uart_por
/*
* Allocate the IRQ
*/
- retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ retval = request_irq(uap->port.irq, pl011_int, IRQF_SHARED,
+ "uart-pl011", uap);
if (retval)
goto clk_dis;

--- /dev/null
+++ b/drivers/serial/pl011_kgdb.c
@@ -0,0 +1,117 @@
+/*
+ * driver/serial/pl011_kgdb.c
+ *
+ * Support for KGDB on ARM AMBA PL011 UARTs
+ *
+ * Authors: Manish Lachwani <mlachwani@mvista.com>
+ * Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (c) 2005-2007 MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether expressor implied.
+ *
+ */
+#include <linux/kgdb.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/io.h>
+
+#include <asm/processor.h>
+#include <asm/hardware.h>
+
+static int kgdb_irq = CONFIG_KGDB_AMBA_IRQ;
+
+#define UART_DIVISOR (CONFIG_KGDB_AMBA_UARTCLK * 4 / CONFIG_KGDB_BAUDRATE)
+/*
+ * Todo: IO_ADDRESS is not very generic across ARM...
+ */
+static volatile unsigned char *kgdb_port =
+ (unsigned char *)IO_ADDRESS(CONFIG_KGDB_AMBA_BASE);
+
+/*
+ * Init code taken from amba-pl011.c.
+ */
+static int kgdb_serial_init(void)
+{
+ writew(0, kgdb_port + UART010_CR);
+
+ /* Set baud rate */
+ writew(UART_DIVISOR & 0x3f, kgdb_port + UART011_FBRD);
+ writew(UART_DIVISOR >> 6, kgdb_port + UART011_IBRD);
+
+ writew(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, kgdb_port +
+ UART010_LCRH);
+ writew(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE,
+ kgdb_port + UART010_CR);
+
+ writew(UART011_RXIM, kgdb_port + UART011_IMSC);
+
+ return 0;
+}
+
+static void kgdb_serial_putchar(u8 ch)
+{
+ unsigned int status;
+
+ do {
+ status = readw(kgdb_port + UART01x_FR);
+ } while (status & UART01x_FR_TXFF);
+
+ writew(ch, kgdb_port + UART01x_DR);
+}
+
+static int kgdb_serial_getchar(void)
+{
+ unsigned int status;
+ int ch;
+
+#ifdef CONFIG_DEBUG_LL_OLD
+ printascii("Entering serial_getchar loop");
+#endif
+ do {
+ status = readw(kgdb_port + UART01x_FR);
+ } while (status & UART01x_FR_RXFE);
+ ch = readw(kgdb_port + UART01x_DR);
+#ifdef CONFIG_DEBUG_LL_OLD
+ printascii("Exited serial_getchar loop");
+ printascii("Read char: ");
+ printch(ch);
+ printascii("\n");
+#endif
+ return ch;
+}
+
+static irqreturn_t kgdb_interrupt(int irq, void *dev_id)
+{
+ int status = readw(kgdb_port + UART011_MIS);
+
+#ifdef CONFIG_DEBUG_LL_OLD
+ printascii("KGDB irq\n");
+#endif
+ if (irq != kgdb_irq)
+ return IRQ_NONE;
+
+ if (status & 0x40)
+ breakpoint();
+
+ return IRQ_HANDLED;
+}
+
+static void __init kgdb_hookup_irq(void)
+{
+ int retval;
+ retval = request_irq(kgdb_irq, kgdb_interrupt, IRQF_SHARED,
+ "KGDB-serial", (void *)kgdb_port);
+ if (retval) {
+ printk(KERN_ERR "pl011_kgdb: ERROR requesting irq\n");
+ }
+}
+
+struct kgdb_io kgdb_io_ops = {
+ .init = kgdb_serial_init,
+ .write_char = kgdb_serial_putchar,
+ .read_char = kgdb_serial_getchar,
+ .late_init = kgdb_hookup_irq,
+};
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -42,6 +42,9 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#ifdef CONFIG_KGDB_CONSOLE
+#include <linux/kgdb.h>
+#endif

#include <asm/io.h>
#include <asm/hardware.h>
@@ -690,6 +693,8 @@ serial_pxa_console_init(void)
console_initcall(serial_pxa_console_init);

#define PXA_CONSOLE &serial_pxa_console
+#elif defined(CONFIG_KGDB_CONSOLE)
+#define PXA_CONSOLE &kgdbcons
#else
#define PXA_CONSOLE NULL
#endif
--- /dev/null
+++ b/include/asm-arm/kgdb.h
@@ -0,0 +1,103 @@
+/*
+ * include/asm-arm/kgdb.h
+ *
+ * ARM KGDB support
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ *
+ */
+
+#ifndef __ASM_KGDB_H__
+#define __ASM_KGDB_H__
+
+#include <linux/ptrace.h>
+#include <asm-generic/kgdb.h>
+
+
+/*
+ * GDB assumes that we're a user process being debugged, so
+ * it will send us an SWI command to write into memory as the
+ * debug trap. When an SWI occurs, the next instruction addr is
+ * placed into R14_svc before jumping to the vector trap.
+ * This doesn't work for kernel debugging as we are already in SVC
+ * we would loose the kernel's LR, which is a bad thing. This
+ * is bad thing.
+ *
+ * By doing this as an undefined instruction trap, we force a mode
+ * switch from SVC to UND mode, allowing us to save full kernel state.
+ *
+ * We also define a KGDB_COMPILED_BREAK which can be used to compile
+ * in breakpoints. This is important for things like sysrq-G and for
+ * the initial breakpoint from trap_init().
+ *
+ * Note to ARM HW designers: Add real trap support like SH && PPC to
+ * make our lives much much simpler. :)
+ */
+#define BREAK_INSTR_SIZE 4
+#define GDB_BREAKINST 0xef9f0001
+#define KGDB_BREAKINST 0xe7ffdefe
+#define KGDB_COMPILED_BREAK 0xe7ffdeff
+#define CACHE_FLUSH_IS_SAFE 1
+
+#ifndef __ASSEMBLY__
+
+#define BREAKPOINT() asm(".word 0xe7ffdeff")
+
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * From Kevin Hilman:
+ *
+ * gdb is expecting the following registers layout.
+ *
+ * r0-r15: 1 long word each
+ * f0-f7: unused, 3 long words each !!
+ * fps: unused, 1 long word
+ * cpsr: 1 long word
+ *
+ * Even though f0-f7 and fps are not used, they need to be
+ * present in the registers sent for correct processing in
+ * the host-side gdb.
+ *
+ * In particular, it is crucial that CPSR is in the right place,
+ * otherwise gdb will not be able to correctly interpret stepping over
+ * conditional branches.
+ */
+#define _GP_REGS 16
+#define _FP_REGS 8
+#define _EXTRA_REGS 2
+#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+
+#define KGDB_MAX_NO_CPUS 1
+#define BUFMAX 400
+#define NUMREGBYTES (GDB_MAX_REGS << 2)
+#define NUMCRITREGBYTES (32 << 2)
+
+#define _R0 0
+#define _R1 1
+#define _R2 2
+#define _R3 3
+#define _R4 4
+#define _R5 5
+#define _R6 6
+#define _R7 7
+#define _R8 8
+#define _R9 9
+#define _R10 10
+#define _FP 11
+#define _IP 12
+#define _SP 13
+#define _LR 14
+#define _PC 15
+#define _CPSR (GDB_MAX_REGS - 1)
+
+/* So that we can denote the end of a frame for tracing, in the simple
+ * case. */
+#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SP, func)
+
+#endif /* __ASM_KGDB_H__ */
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -14,7 +14,7 @@ config KGDB
bool "KGDB: kernel debugging with remote gdb"
select WANT_EXTRA_DEBUG_INFORMATION
select KGDB_ARCH_HAS_SHADOW_INFO if X86_64
- depends on DEBUG_KERNEL && (X86 || MIPS || (SUPERH && !SUPERH64) || IA64 || PPC)
+ depends on DEBUG_KERNEL && (ARM || X86 || MIPS || (SUPERH && !SUPERH64) || IA64 || PPC)
help
If you say Y here, it will be possible to remotely debug the
kernel using gdb. Documentation of kernel debugger is available
@@ -45,6 +45,8 @@ choice
default KGDB_SIBYTE if SIBYTE_SB1xxx_SOC
default KGDB_TXX9 if CPU_TX49XX
default KGDB_SH_SCI if SERIAL_SH_SCI
+ default KGDB_PXA_SERIAL if ARCH_PXA
+ default KGDB_AMBA_PL011 if ARM_AMBA
default KGDB_8250_NOMODULE
help
There are a number of different ways in which you can communicate
@@ -111,6 +113,34 @@ config KGDB_SH_SCI
depends on SUPERH && SERIAL_SH_SCI
help
Uses the SH SCI(F) serial port to communicate with the host GDB.
+
+config KGDB_AMBA_PL011
+ bool "KGDB: On ARM AMBA PL011 Serial Port"
+ depends on ARM && ARCH_VERSATILE
+ help
+ Enables the KGDB serial driver for the AMBA bus PL011 serial
+ devices from ARM.
+
+config KGDB_PXA_SERIAL
+ bool "KGDB: On the PXA2xx serial port"
+ depends on ARCH_PXA
+ help
+ Enables the KGDB serial driver for Intel PXA SOC
+endchoice
+
+choice
+ prompt "PXA UART to use for KGDB"
+ depends on KGDB_PXA_SERIAL
+ default KGDB_PXA_FFUART
+
+config KGDB_PXA_FFUART
+ bool "FFUART"
+
+config KGDB_PXA_BTUART
+ bool "BTUART"
+
+config KGDB_PXA_STUART
+ bool "STUART"
endchoice

choice
@@ -179,7 +209,7 @@ config KGDB_BAUDRATE
int "Debug serial port baud rate"
depends on (KGDB_8250 && KGDB_SIMPLE_SERIAL) || \
KGDB_MPSC || KGDB_CPM_UART || \
- KGDB_TXX9
+ KGDB_TXX9 || KGDB_PXA_SERIAL || KGDB_AMBA_PL011
default "115200"
help
gdb and the kernel stub need to agree on the baud rate to be
@@ -195,6 +225,27 @@ config KGDB_PORT_NUM
help
Pick the port number (0 based) for KGDB to use.

+config KGDB_AMBA_BASE
+ hex "AMBA PL011 Serial Port Base Address"
+ default 0x101f2000 if ARCH_VERSATILE
+ depends on KGDB_AMBA_PL011
+ help
+ Base address of the AMBA port that KGDB will use.
+
+config KGDB_AMBA_UARTCLK
+ int "AMBAPL011 Serial UART Clock Frequency"
+ default 24000000 if ARCH_VERSATILE
+ depends on KGDB_AMBA_PL011
+ help
+ Frequency (in HZ) of the ARM AMBA UART clock
+
+config KGDB_AMBA_IRQ
+ int "AMBA PL011 Serial Port IRQ"
+ default 13 if ARCH_VERSATILE
+ depends on KGDB_AMBA_PL011
+ help
+ Pick the IRQ of the AMBA port that KGDB will use.
+
config KGDB_8250_CONF_STRING
string "Configuration string for KGDB"
depends on KGDB_8250_NOMODULE && !KGDB_SIMPLE_SERIAL
\
 
 \ /
  Last update: 2007-10-15 20:51    [W:1.831 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site