lkml.org 
[lkml]   [2007]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update

Subject: Add support to OProfile for profiling Cell BE SPUs

From: Maynard Johnson <maynardj@us.ibm.com>

This patch updates the existing arch/powerpc/oprofile/op_model_cell.c
to add in the SPU profiling capabilities. In addition, a 'cell' subdirectory
was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling
code.

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>

Index: linux-2.6.20-rc1/arch/powerpc/configs/cell_defconfig
===================================================================
--- linux-2.6.20-rc1.orig/arch/powerpc/configs/cell_defconfig 2007-01-18 16:43:14.230540320 -0600
+++ linux-2.6.20-rc1/arch/powerpc/configs/cell_defconfig 2007-01-29 10:32:03.386789608 -0600
@@ -1403,7 +1403,7 @@
# Instrumentation Support
#
CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set

#
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/cell/pr_util.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/cell/pr_util.h 2007-01-29 10:32:03.388789304 -0600
@@ -0,0 +1,75 @@
+ /*
+ * Cell Broadband Engine OProfile Support
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author: Maynard Johnson <maynardj@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef PR_UTIL_H
+#define PR_UTIL_H
+
+#include <linux/cpumask.h>
+#include <linux/oprofile.h>
+#include <asm/cell-pmu.h>
+#include <asm/spu.h>
+
+#define number_of_online_nodes(nodes) { \
+ u32 cpu; u32 tmp; \
+ nodes = 0; \
+ for_each_online_cpu(cpu) { \
+ tmp = cbe_cpu_to_node(cpu) + 1;\
+ if (tmp > nodes) \
+ nodes++; \
+ } \
+}
+
+
+/* Defines used for sync_start */
+#define SKIP_GENERIC_SYNC 0
+#define SYNC_START_ERROR -1
+#define DO_GENERIC_SYNC 1
+
+typedef struct vma_map
+{
+ struct vma_map *next;
+ unsigned int vma;
+ unsigned int size;
+ unsigned int offset;
+ unsigned int guard_ptr;
+ unsigned int guard_val;
+} vma_map_t;
+
+/* The three functions below are for maintaining and accessing
+ * the vma-to-file offset map.
+ */
+vma_map_t * create_vma_map(const struct spu * spu, u64 objectid);
+unsigned int vma_map_lookup(vma_map_t *map, unsigned int vma,
+ const struct spu * aSpu);
+void vma_map_free(struct vma_map *map);
+
+/*
+ * Entry point for SPU profiling.
+ * cycles_reset is the SPU_CYCLES count value specified by the user.
+ */
+void start_spu_profiling(unsigned int cycles_reset);
+
+void stop_spu_profiling(void);
+
+
+/* add the necessary profiling hooks */
+int spu_sync_start(void);
+
+/* remove the hooks */
+int spu_sync_stop(void);
+
+/* Record SPU program counter samples to the oprofile event buffer. */
+void spu_sync_buffer(int spu_num, unsigned int * samples,
+ int num_samples);
+
+#endif // PR_UTIL_H
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/cell/spu_profiler.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/cell/spu_profiler.c 2007-01-29 10:32:03.392788696 -0600
@@ -0,0 +1,204 @@
+/*
+ * Cell Broadband Engine OProfile Support
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Authors: Maynard Johnson <maynardj@us.ibm.com>
+ * Carl Love <carll@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/hrtimer.h>
+#include <linux/smp.h>
+#include <linux/slab.h>
+#include <asm/cell-pmu.h>
+#include "pr_util.h"
+
+#define TRACE_ARRAY_SIZE 1024
+static u32 * samples;
+static u32 * samples_per_node;
+
+static int spu_prof_running = 0;
+static unsigned int profiling_interval = 0;
+
+extern int num_nodes;
+extern unsigned int khzfreq;
+
+/*
+ * Oprofile setup functions
+ */
+
+#define NUM_SPU_BITS_TRBUF 16
+#define SPUS_PER_TB_ENTRY 4
+#define SPUS_PER_NODE 8
+
+/*
+ * Collect the SPU program counter samples from the trace buffer.
+ * The global variable usage is as follows:
+ * samples[<total-spus>][TRACE_ARRAY_SIZE] - array to store SPU PC samples
+ * Assumption, the array will be all zeros on entry.
+ * u32 samples_per_node[num_nodes] - array of how many valid samples per node
+ */
+static void cell_spu_pc_collection(void)
+{
+ int cpu;
+ int node;
+ int spu;
+ u32 trace_addr;
+ /* the trace buffer is 128 bits */
+ u64 trace_buffer[2];
+ u64 spu_pc_lower;
+ u64 spu_pc_upper;
+ u64 spu_mask;
+ int entry, node_factor;
+ // process the collected SPU PC for each node
+ for_each_online_cpu(cpu) {
+ if (cbe_get_hw_thread_id(cpu))
+ continue;
+
+ node = cbe_cpu_to_node(cpu);
+ node_factor = node * SPUS_PER_NODE;
+ /* number of valid entries for this node */
+ entry = 0;
+
+ trace_addr = cbe_read_pm(cpu, trace_address);
+ while ((trace_addr & CBE_PM_TRACE_BUF_EMPTY) != 0x400)
+ {
+ /* there is data in the trace buffer to process */
+ cbe_read_trace_buffer(cpu, trace_buffer);
+ spu_mask = 0xFFFF000000000000;
+
+ /* Each SPU PC is 16 bits; hence, four spus in each of
+ * the two 64-bit buffer entries that make up the
+ * 128-bit trace_buffer entry. Process the upper and
+ * lower 64-bit values simultaneously.
+ */
+ for (spu = 0; spu < SPUS_PER_TB_ENTRY; spu++) {
+ spu_pc_lower = spu_mask & trace_buffer[0];
+ spu_pc_lower = spu_pc_lower >> (NUM_SPU_BITS_TRBUF
+ * (SPUS_PER_TB_ENTRY-spu-1));
+
+ spu_pc_upper = spu_mask & trace_buffer[1];
+ spu_pc_upper = spu_pc_upper >> (NUM_SPU_BITS_TRBUF
+ * (SPUS_PER_TB_ENTRY-spu-1));
+
+ spu_mask = spu_mask >> NUM_SPU_BITS_TRBUF;
+
+ /* spu PC trace entry is upper 16 bits of the
+ * 18 bit SPU program counter
+ */
+ spu_pc_lower = spu_pc_lower << 2;
+ spu_pc_upper = spu_pc_upper << 2;
+
+ samples[((node_factor + spu) * TRACE_ARRAY_SIZE) + entry]
+ = (u32) spu_pc_lower;
+ samples[((node_factor + spu + SPUS_PER_TB_ENTRY) * TRACE_ARRAY_SIZE) + entry]
+ = (u32) spu_pc_upper;
+ }
+
+ entry++;
+
+ if (entry >= TRACE_ARRAY_SIZE)
+ /* spu_samples is full */
+ break;
+
+ trace_addr = cbe_read_pm(cpu, trace_address);
+ }
+ samples_per_node[node] = entry;
+ }
+}
+
+
+static int profile_spus(struct hrtimer * timer)
+{
+ ktime_t kt;
+ int cpu, node, k, num_samples, spu_num;
+
+ if (!spu_prof_running)
+ goto STOP;
+
+ cell_spu_pc_collection();
+ for_each_online_cpu(cpu) {
+ if (cbe_get_hw_thread_id(cpu))
+ continue;
+
+ node = cbe_cpu_to_node(cpu);
+
+ num_samples = samples_per_node[node];
+ if (num_samples == 0)
+ continue;
+ for (k = 0; k < SPUS_PER_NODE; k++) {
+ spu_num = k + (node * SPUS_PER_NODE);
+ spu_sync_buffer(spu_num, samples + (spu_num * TRACE_ARRAY_SIZE), num_samples);
+ }
+ }
+ smp_wmb();
+
+ kt = ktime_set(0, profiling_interval);
+ if (!spu_prof_running)
+ goto STOP;
+ hrtimer_forward(timer, timer->base->get_time(), kt);
+ return HRTIMER_RESTART;
+
+ STOP:
+ printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n");
+ return HRTIMER_NORESTART;
+}
+
+static struct hrtimer timer;
+#define SCALE_SHIFT 14
+/*
+ * Entry point for SPU profiling.
+ * NOTE: SPU profiling is done system-wide, not per-CPU.
+ *
+ * cycles_reset is the count value specified by the user when
+ * setting up OProfile to count SPU_CYCLES.
+ */
+void start_spu_profiling(unsigned int cycles_reset) {
+
+ ktime_t kt;
+
+ /* To calculate a timeout in nanoseconds, the basic
+ * formula is ns = cycles_reset * (NSEC_PER_SEC / cpu frequency).
+ * To avoid floating point math, we use the scale math
+ * technique as described in linux/jiffies.h. We use
+ * a scale factor of SCALE_SHIFT,which provides 4 decimal places
+ * of precision, which is close enough for the purpose at hand.
+ */
+
+ /* Since cpufreq_quick_get returns frequency in kHz, we use
+ * USEC_PER_SEC here vs NSEC_PER_SEC.
+ */
+ unsigned long nsPerCyc = (USEC_PER_SEC << SCALE_SHIFT)/khzfreq;
+ profiling_interval = (nsPerCyc * cycles_reset) >> SCALE_SHIFT;
+
+ pr_debug("timer resolution: %lu\n",
+ TICK_NSEC);
+ kt = ktime_set(0, profiling_interval);
+ hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_REL);
+ timer.expires = kt;
+ timer.function = profile_spus;
+
+ /* Allocate arrays for collecting SPU PC samples */
+ samples = (u32 *) kzalloc(num_nodes * SPUS_PER_NODE * TRACE_ARRAY_SIZE * sizeof(u32), GFP_ATOMIC);
+ samples_per_node = (u32 *) kzalloc(num_nodes * sizeof(u32), GFP_ATOMIC);
+
+ spu_prof_running = 1;
+ hrtimer_start(&timer, kt, HRTIMER_REL);
+}
+
+void stop_spu_profiling(void)
+{
+
+ hrtimer_cancel(&timer);
+ kfree(samples);
+ kfree(samples_per_node);
+ pr_debug("SPU_PROF: stop_spu_profiling issued\n");
+ spu_prof_running = 0;
+}
+
+
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/cell/spu_task_sync.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/cell/spu_task_sync.c 2007-01-29 10:32:03.398787784 -0600
@@ -0,0 +1,493 @@
+/*
+ * Cell Broadband Engine OProfile Support
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author: Maynard Johnson <maynardj@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* The purpose of this file is to handle SPU event task switching
+ * and to record SPU context information into the OProfile
+ * event buffer.
+ *
+ * Additionally, the spu_sync_buffer function is provided as a helper
+ * for recoding actual SPU program counter samples to the event buffer.
+ */
+
+#include <linux/notifier.h>
+#include <linux/list.h>
+#include <linux/numa.h>
+#include <linux/mm.h>
+#include <linux/dcookies.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/oprofile.h>
+#include "pr_util.h"
+
+#define DISCARD_ALL 9999
+
+static spinlock_t buffer_lock = SPIN_LOCK_UNLOCKED;
+static int num_spu_nodes;
+int num_nodes;
+
+/* Conainer for caching information about an active SPU task.
+ * :map -- pointer to a list of vma_maps
+ * :spu -- the spu for this active SPU task
+ * :list -- potentially could be used to contain the cached_infos
+ * for inactive SPU tasks.
+ *
+ * Ideally, we would like to be able to create the cached_info for
+ * an SPU task just one time -- when libspe first loads the SPU
+ * binary file. We would store the cached_info in a list. Then, as
+ * SPU tasks are switched out and new ones switched in, the cached_info
+ * for inactive tasks would be kept, and the active one would be placed
+ * at the head of the list. But this technique may not with
+ * current spufs functionality since the spu used in bind_context may
+ * be a different spu than was used in a previous bind_context for a
+ * reactivated SPU task. Additionally, a reactivated SPU task may be
+ * assigned to run on a different physical SPE. We will investigate
+ * further if this can be done.
+ *
+ */
+struct cached_info {
+ vma_map_t * map;
+ struct spu * the_spu;
+ struct kref cache_ref;
+ struct list_head list;
+};
+
+/* A data structure for cached information about active SPU tasks.
+ * Storage is dynamically allocated, sized as
+ * "number of active nodes multplied by 8".
+ * The info_list[n] member holds 0 or more
+ * 'struct cached_info' objects for SPU#=n.
+ *
+ * As currently implemented, there will only ever be one cached_info
+ * in the list for a given SPU. If we can devise a way to maintain
+ * multiple cached_infos in our list, then it would make sense
+ * to also cache the dcookie representing the PPU task application.
+ * See above description of struct cached_info for more details.
+ */
+struct spu_info_stacks {
+ struct list_head * info_list;
+};
+
+static spinlock_t cache_lock = SPIN_LOCK_UNLOCKED;
+
+
+static struct spu_info_stacks * spu_info;
+
+static void destroy_cached_info(struct kref * kref)
+{
+ struct cached_info * info;
+ info = container_of(kref, struct cached_info, cache_ref);
+ vma_map_free(info->map);
+ kfree(info);
+}
+
+static int put_cached_info(struct cached_info * info)
+{
+ return kref_put(&info->cache_ref, &destroy_cached_info);
+}
+
+/* Return the cached_info for the passed SPU number.
+ * Current implementation is such that a list will hold, at most,
+ * one cached_info.
+ *
+ * NOTE: Clients of this function MUST call put_cached_info()
+ * when finished using the returned cached_info (if the
+ * returned value is non-null).
+ */
+static struct cached_info * get_cached_info(int spu_num)
+{
+ struct cached_info * ret_info, * info;
+ unsigned long flags = 0;
+ ret_info = NULL;
+ spin_lock_irqsave(&cache_lock, flags);
+ if (spu_info == NULL) {
+ pr_debug("SPU_PROF:%s: spu_info does not exist\n",
+ __FUNCTION__);
+ goto out;
+ }
+ if (spu_num >= num_spu_nodes) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Invalid index %d into spu info cache\n",
+ __FUNCTION__, __LINE__, spu_num);
+ goto out;
+ }
+ list_for_each_entry(info, &spu_info->info_list[spu_num], list) {
+ /* Only one item in the list, so return it. */
+ ret_info = info;
+ kref_get(&info->cache_ref);
+ break;
+ }
+
+out:
+ spin_unlock_irqrestore(&cache_lock, flags);
+ return ret_info;
+}
+
+
+/* Looks for cached info for the passed spu. If not found, the
+ * cached info is created for the passed spu.
+ * Returns 0 for success; otherwise, -1 for error.
+ */
+static int
+prepare_cached_spu_info(struct spu * spu, unsigned int objectId)
+{
+ vma_map_t * new_map;
+ unsigned long flags = 0;
+ int retval = 0;
+ /* spu->number is a system-wide value, not a per-node value. */
+ struct cached_info * info = get_cached_info(spu->number);
+ if (info == NULL) {
+ /* create cached_info and add it to the list for SPU #<n>.*/
+ info = kzalloc(sizeof(struct cached_info), GFP_ATOMIC);
+ if (!info) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: create vma_map failed\n",
+ __FUNCTION__, __LINE__);
+ goto ERR_ALLOC;
+ }
+ new_map = create_vma_map(spu, objectId);
+ if (!new_map) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: create vma_map failed\n",
+ __FUNCTION__, __LINE__);
+ goto ERR_ALLOC;
+ }
+
+ pr_debug("Created vma_map\n");
+ info->map = new_map;
+ info->the_spu = spu;
+ kref_init(&info->cache_ref);
+ spin_lock_irqsave(&cache_lock, flags);
+ list_add(&info->list, &spu_info->info_list[spu->number]);
+ spin_unlock_irqrestore(&cache_lock, flags);
+ goto OUT;
+ } else {
+ /* Immedidately put back reference to cached_info since we don't
+ * really need it -- just checking whether we have it.
+ */
+ put_cached_info(info);
+ pr_debug("Found cached SPU info.\n");
+ }
+
+ERR_ALLOC:
+ retval = -1;
+OUT:
+ return retval;
+}
+
+
+/* Discard all cached info and free the memory.
+ * NOTE: The caller is responsible for locking the
+ * spu_info struct containing the cached_info
+ * prior to calling this function.
+ */
+static int discard_cached_info(int spu_index)
+{
+ struct cached_info * info, * tmp;
+ int index, end;
+ if (spu_index == DISCARD_ALL) {
+ end = num_spu_nodes;
+ index = 0;
+ } else {
+ if (spu_index >= num_spu_nodes) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Invalid index %d into spu info cache\n",
+ __FUNCTION__, __LINE__, spu_index);
+ goto out;
+ }
+ end = spu_index +1;
+ index = spu_index;
+ }
+ for (; index < end; index++) {
+ list_for_each_entry_safe(info, tmp,
+ &spu_info->info_list[index],
+ list) {
+ list_del(&info->list);
+ put_cached_info(info);
+ }
+ }
+out:
+ return 0;
+}
+
+/* The source code for fast_get_dcookie was "borrowed"
+ * from drivers/oprofile/buffer_sync.c.
+ */
+
+/* Optimisation. We can manage without taking the dcookie sem
+ * because we cannot reach this code without at least one
+ * dcookie user still being registered (namely, the reader
+ * of the event buffer).
+ */
+static inline unsigned long fast_get_dcookie(struct dentry * dentry,
+ struct vfsmount * vfsmnt)
+{
+ unsigned long cookie;
+
+ if (dentry->d_cookie)
+ return (unsigned long)dentry;
+ get_dcookie(dentry, vfsmnt, &cookie);
+ return cookie;
+}
+
+/* Look up the dcookie for the task's first VM_EXECUTABLE mapping,
+ * which corresponds loosely to "application name". Also, determine
+ * the offset for the SPU ELF object. If computed offset is
+ * non-zero, it implies an embedded SPU object; otherwise, it's a
+ * separate SPU binary, in which case we retrieve it's dcookie.
+ */
+static unsigned long
+get_exec_dcookie_and_offset(
+ struct spu * spu, unsigned int * offsetp,
+ unsigned long * spu_bin_dcookie,
+ unsigned int spu_ref)
+{
+ unsigned long cookie = 0;
+ unsigned int my_offset = 0;
+ struct vm_area_struct * vma;
+ struct mm_struct * mm = spu->mm;
+
+ if (!mm)
+ goto OUT;
+
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ if (!vma->vm_file)
+ continue;
+ if (!(vma->vm_flags & VM_EXECUTABLE))
+ continue;
+ cookie = fast_get_dcookie(vma->vm_file->f_dentry,
+ vma->vm_file->f_vfsmnt);
+ pr_debug("got dcookie for %s\n",
+ vma->vm_file->f_dentry->d_name.name);
+ break;
+ }
+
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ if (vma->vm_start > spu_ref || vma->vm_end < spu_ref)
+ continue;
+ my_offset = spu_ref - vma->vm_start;
+ pr_debug("Found spu ELF at "
+ " %X for file %s\n", my_offset,
+ vma->vm_file->f_dentry->d_name.name);
+ *offsetp = my_offset;
+ if (my_offset == 0) {
+ if (!vma->vm_file) {
+ goto FAIL_NO_SPU_COOKIE;
+ }
+ *spu_bin_dcookie = fast_get_dcookie(
+ vma->vm_file->f_dentry,
+ vma->vm_file->f_vfsmnt);
+ pr_debug("got dcookie for %s\n",
+ vma->vm_file->f_dentry->d_name.name);
+ }
+ break;
+ }
+
+OUT:
+ return cookie;
+
+FAIL_NO_SPU_COOKIE:
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Cannot find dcookie for SPU binary\n",
+ __FUNCTION__, __LINE__);
+ goto OUT;
+}
+
+
+
+/* This function finds or creates cached context information for the
+ * passed SPU and records SPU context information into the OProfile
+ * event buffer.
+ */
+static int process_context_switch(struct spu * spu, unsigned int objectId)
+{
+ unsigned long flags = 0;
+ int retval = 0;
+ unsigned int offset = 0;
+ unsigned long spu_cookie = 0, app_dcookie = 0;
+ retval = prepare_cached_spu_info(spu, objectId);
+ if (retval == -1) {
+ goto OUT;
+ }
+ /* Get dcookie first because a mutex_lock is taken in that
+ * code path, so interrupts must not be disabled.
+ */
+ app_dcookie = get_exec_dcookie_and_offset(spu, &offset,
+ &spu_cookie, objectId);
+
+ /* Record context info in event buffer */
+ spin_lock_irqsave(&buffer_lock, flags);
+ add_event_entry(ESCAPE_CODE);
+ add_event_entry(SPU_CTX_SWITCH_CODE);
+ add_event_entry(spu->number);
+ add_event_entry(spu->pid);
+ add_event_entry(spu->tgid);
+ add_event_entry(app_dcookie);
+
+ add_event_entry(ESCAPE_CODE);
+ if (offset) {
+ /* When offset is non-zero, this means the SPU ELF was embedded;
+ * otherwise, it was loaded from a separate binary file. For the
+ * embedded case, we record the offset of the SPU ELF into the PPU
+ * executable; for the non-embedded case, we record a dcookie that
+ * points to the location of the SPU binary that was loaded.
+ */
+ add_event_entry(SPU_OFFSET_CODE);
+ add_event_entry(offset);
+ } else {
+ add_event_entry(SPU_COOKIE_CODE);
+ add_event_entry(spu_cookie);
+ }
+ spin_unlock_irqrestore(&buffer_lock, flags);
+ smp_wmb();
+OUT:
+ return retval;
+}
+
+/*
+ * This function is invoked on either a bind_context or unbind_context.
+ * If called for an unbind_context, the val arg is 0; otherwise,
+ * it is the object-id value for the spu context.
+ * The data arg is of type 'struct spu *'.
+ */
+static int spu_active_notify(struct notifier_block * self, unsigned long val,
+ void * data)
+{
+ int retval ;
+ unsigned long flags = 0;
+ struct spu * the_spu = (struct spu *) data;
+ pr_debug("SPU event notification arrived\n");
+ if (val == 0){
+ spin_lock_irqsave(&cache_lock, flags);
+ retval = discard_cached_info(the_spu->number);
+ spin_unlock_irqrestore(&cache_lock, flags);
+ } else {
+ retval = process_context_switch(the_spu, val);
+ }
+ return retval;
+}
+
+static struct notifier_block spu_active = {
+ .notifier_call = spu_active_notify,
+};
+
+/* The main purpose of this function is to synchronize
+ * OProfile with SPUFS by registering to be notified of
+ * SPU task switches.
+ *
+ * NOTE: When profiling SPUs, we must ensure that only
+ * spu_sync_start is invoked and not the generic sync_start
+ * in drivers/oprofile/oprof.c. A return value of
+ * SKIP_GENERIC_SYNC or SYNC_START_ERROR will
+ * accomplish this.
+ */
+int spu_sync_start(void) {
+ int ret = SKIP_GENERIC_SYNC;
+ int register_ret;
+ int i;
+ unsigned long flags = 0;
+ number_of_online_nodes(num_nodes);
+ num_spu_nodes = num_nodes * 8;
+ spin_lock_irqsave(&cache_lock, flags);
+ spu_info = kzalloc(sizeof(struct spu_info_stacks), GFP_ATOMIC);
+ spu_info->info_list = kzalloc(sizeof(struct list_head) * num_spu_nodes,
+ GFP_ATOMIC);
+
+ for (i = 0; i < num_spu_nodes; i++) {
+ INIT_LIST_HEAD(&spu_info->info_list[i]);
+ }
+ spin_unlock_irqrestore(&cache_lock, flags);
+
+ spin_lock_irqsave(&buffer_lock, flags);
+ add_event_entry(ESCAPE_CODE);
+ add_event_entry(SPU_PROFILING_CODE);
+ add_event_entry(num_spu_nodes);
+ spin_unlock_irqrestore(&buffer_lock, flags);
+
+ /* Register for SPU events */
+ register_ret = spu_switch_event_register(&spu_active);
+ if (register_ret) {
+ ret = SYNC_START_ERROR;
+ goto OUT;
+ }
+
+ pr_debug("spu_sync_start -- running.\n");
+OUT:
+ return ret;
+}
+
+/* Record SPU program counter samples to the oprofile event buffer. */
+void spu_sync_buffer(int spu_num, unsigned int * samples,
+ int num_samples)
+{
+ unsigned long flags = 0;
+ int i;
+ vma_map_t * map;
+ struct spu * the_spu;
+ unsigned long long spu_num_ll = spu_num;
+ unsigned long long spu_num_shifted = spu_num_ll << 32;
+ struct cached_info * c_info = get_cached_info(spu_num);
+ if (c_info == NULL) {
+/* This legitimately happens when the SPU task ends before all
+ * samples are recorded. No big deal -- so we just drop a few samples.
+ */
+ pr_debug("SPU_PROF: No cached SPU contex "
+ "for SPU #%d. Dropping samples.\n", spu_num);
+ return ;
+ }
+
+ map = c_info->map;
+ the_spu = c_info->the_spu;
+ spin_lock_irqsave(&buffer_lock, flags);
+ for (i = 0; i < num_samples; i++) {
+ unsigned long long file_offset;
+ unsigned int sample = *(samples+i);
+ if (sample == 0)
+ continue;
+ file_offset = vma_map_lookup(
+ map, sample, the_spu);
+ /* For now, we'll drop samples that can't be mapped.
+ * This can happen for generated stubs executed from
+ * the SPU stack. Do we need to record these somehow?
+ */
+ if (unlikely(file_offset == -1))
+ continue;
+ add_event_entry(file_offset | spu_num_shifted);
+ }
+ spin_unlock_irqrestore(&buffer_lock, flags);
+ put_cached_info(c_info);
+}
+
+
+int spu_sync_stop(void)
+{
+ unsigned long flags = 0;
+ int ret = spu_switch_event_unregister(&spu_active);
+ if (ret) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: spu_switch_event_unregister returned %d\n",
+ __FUNCTION__, __LINE__, ret);
+ goto OUT;
+ }
+
+ spin_lock_irqsave(&cache_lock, flags);
+ ret = discard_cached_info(DISCARD_ALL);
+ kfree(spu_info->info_list);
+ kfree(spu_info);
+ spin_unlock_irqrestore(&cache_lock, flags);
+
+OUT:
+ pr_debug("spu_sync_stop -- done.\n");
+ return ret;
+}
+
+
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/cell/vma_map.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/cell/vma_map.c 2007-01-29 10:32:03.401787328 -0600
@@ -0,0 +1,228 @@
+ /*
+ * Cell Broadband Engine OProfile Support
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author: Maynard Johnson <maynardj@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* The code in this source file is responsible for generating
+ * vma-to-fileOffset maps for both overlay and non-overlay SPU
+ * applications.
+ */
+
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/elf.h>
+#include "pr_util.h"
+
+
+void vma_map_free(struct vma_map *map)
+{
+ while (map) {
+ vma_map_t *next = map->next;
+ kfree(map);
+ map = next;
+ }
+}
+
+unsigned int vma_map_lookup(vma_map_t *map, unsigned int vma,
+ const struct spu * aSpu)
+{
+ u32 offset = -1;
+ u32 ovly_grd;
+ for (; map; map = map->next) {
+ if (vma < map->vma || vma >= map->vma + map->size)
+ continue;
+
+ if (map->guard_ptr) {
+ ovly_grd = *(u32 *)(aSpu->local_store + map->guard_ptr);
+ if (ovly_grd != map->guard_val)
+ continue;
+ }
+ break;
+ }
+
+ if (likely(map != NULL)) {
+ offset = vma - map->vma + map->offset;
+ }
+ return offset;
+}
+
+static vma_map_t *
+vma_map_add(vma_map_t *map, unsigned int vma, unsigned int size,
+ unsigned int offset, unsigned int guard_ptr,
+ unsigned int guard_val)
+{
+ vma_map_t *new = kzalloc(sizeof(vma_map_t), GFP_ATOMIC);
+ if (!new) {
+ printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
+ __FUNCTION__, __LINE__);
+ vma_map_free(map);
+ return NULL;
+ }
+
+ new->next = map;
+ new->vma = vma;
+ new->size = size;
+ new->offset = offset;
+ new->guard_ptr = guard_ptr;
+ new->guard_val = guard_val;
+
+ return new;
+}
+
+
+/* Parse SPE ELF header and generate a list of vma_maps.
+ * A pointer to the first vma_map in the generated list
+ * of vma_maps is returned. */
+vma_map_t * create_vma_map(const struct spu * aSpu,
+ unsigned long spu_elf_start)
+{
+ static const unsigned char expected[EI_PAD] = {
+ [EI_MAG0] = ELFMAG0,
+ [EI_MAG1] = ELFMAG1,
+ [EI_MAG2] = ELFMAG2,
+ [EI_MAG3] = ELFMAG3,
+ [EI_CLASS] = ELFCLASS32,
+ [EI_DATA] = ELFDATA2MSB,
+ [EI_VERSION] = EV_CURRENT,
+ [EI_OSABI] = ELFOSABI_NONE
+ };
+
+ struct vma_map *map = NULL;
+ unsigned int overlay_tbl_offset = -1;
+ unsigned long phdr_start, shdr_start;
+ Elf32_Ehdr ehdr;
+ Elf32_Phdr phdr;
+ Elf32_Shdr shdr, shdr_str;
+ Elf32_Sym sym;
+ int i, j;
+ char name[32];
+
+ unsigned int ovly_table_sym = 0;
+ unsigned int ovly_buf_table_sym = 0;
+ unsigned int ovly_table_end_sym = 0;
+ unsigned int ovly_buf_table_end_sym = 0;
+ unsigned long ovly_table;
+ unsigned int n_ovlys;
+
+ struct {
+ unsigned int vma;
+ unsigned int size;
+ unsigned int offset;
+ unsigned int buf;
+ } ovly;
+
+ /* Get and validate ELF header. */
+
+ copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr));
+ if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Unexpected value parsing SPU ELF\n",
+ __FUNCTION__, __LINE__);
+ return NULL;
+ }
+ if (ehdr.e_machine != 23) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Unexpected value parsing SPU ELF\n",
+ __FUNCTION__, __LINE__);
+
+ return NULL;
+ }
+ if (ehdr.e_type != ET_EXEC) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Unexpected value parsing SPU ELF\n",
+ __FUNCTION__, __LINE__);
+ return NULL;
+ }
+ phdr_start = spu_elf_start + ehdr.e_phoff;
+ shdr_start = spu_elf_start + ehdr.e_shoff;
+
+ /* Traverse program headers. */
+ for (i = 0; i < ehdr.e_phnum; i++) {
+ copy_from_user(&phdr, (void *) (phdr_start + i * sizeof(phdr)),
+ sizeof(phdr));
+ if (phdr.p_type != PT_LOAD)
+ continue;
+ if (phdr.p_flags & (1 << 27))
+ continue;
+
+ map = vma_map_add(map, phdr.p_vaddr, phdr.p_memsz,
+ phdr.p_offset, 0, 0);
+ if (!map)
+ return NULL;
+ }
+
+ pr_debug("SPU_PROF: Created non-overlay maps\n");
+ /* Traverse section table and search for overlay-related symbols. */
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ copy_from_user(&shdr, (void *) (shdr_start + i * sizeof(shdr)),
+ sizeof(shdr));
+ if (shdr.sh_type != SHT_SYMTAB)
+ continue;
+ if (shdr.sh_entsize != sizeof (sym))
+ continue;
+
+ copy_from_user(&shdr_str,
+ (void *) (shdr_start + shdr.sh_link * sizeof(shdr)),
+ sizeof(shdr));
+ if (shdr_str.sh_type != SHT_STRTAB)
+ return NULL;
+
+ for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
+ copy_from_user(&sym, (void *) (spu_elf_start +
+ shdr.sh_offset + j * sizeof (sym)),
+ sizeof (sym));
+ copy_from_user(name, (void *) (spu_elf_start + shdr_str.sh_offset +
+ sym.st_name),
+ 20);
+ if (memcmp(name, "_ovly_table", 12) == 0)
+ ovly_table_sym = sym.st_value;
+ if (memcmp(name, "_ovly_buf_table", 16) == 0)
+ ovly_buf_table_sym = sym.st_value;
+ if (memcmp(name, "_ovly_table_end", 16) == 0)
+ ovly_table_end_sym = sym.st_value;
+ if (memcmp(name, "_ovly_buf_table_end", 20) == 0)
+ ovly_buf_table_end_sym = sym.st_value;
+ }
+ }
+
+ /* If we don't have overlays, we're done. */
+ if (ovly_table_sym == 0 || ovly_buf_table_sym == 0
+ || ovly_table_end_sym == 0 || ovly_buf_table_end_sym == 0) {
+ pr_debug("SPU_PROF: No overlay table found\n");
+ return map;
+ }
+ else {
+ pr_debug("SPU_PROF: Overlay table found\n");
+ }
+
+ overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym, aSpu);
+ if (overlay_tbl_offset < 0) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: Error finding SPU overlay table\n",
+ __FUNCTION__, __LINE__);
+ return NULL;
+ }
+ ovly_table = spu_elf_start + overlay_tbl_offset;
+ n_ovlys = (ovly_table_end_sym - ovly_table_sym) / sizeof (ovly);
+
+ /* Traverse overlay table. */
+ for (i = 0; i < n_ovlys; i++) {
+ copy_from_user(&ovly, (void *) (ovly_table + i * sizeof (ovly)),
+ sizeof (ovly));
+ map = vma_map_add(map, ovly.vma, ovly.size, ovly.offset,
+ ovly_buf_table_sym + (ovly.buf - 1) * 4, i + 1);
+ if (!map)
+ return NULL;
+ }
+
+ return map;
+}
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/common.c
===================================================================
--- linux-2.6.20-rc1.orig/arch/powerpc/oprofile/common.c 2007-01-18 16:43:14.429510072 -0600
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/common.c 2007-01-29 10:32:03.403787024 -0600
@@ -150,6 +150,8 @@
#ifdef CONFIG_PPC_CELL_NATIVE
case PPC_OPROFILE_CELL:
model = &op_model_cell;
+ ops->sync_start = model->sync_start;
+ ops->sync_stop = model->sync_stop;
break;
#endif
case PPC_OPROFILE_RS64:
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/Kconfig
===================================================================
--- linux-2.6.20-rc1.orig/arch/powerpc/oprofile/Kconfig 2007-01-18 16:43:14.426510528 -0600
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/Kconfig 2007-01-29 10:32:03.404786872 -0600
@@ -7,7 +7,8 @@

config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING
+ default m
+ depends on SPU_FS && PROFILING && CBE_CPUFREQ
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/Makefile
===================================================================
--- linux-2.6.20-rc1.orig/arch/powerpc/oprofile/Makefile 2007-01-18 16:43:14.429510072 -0600
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/Makefile 2007-01-29 10:32:03.405786720 -0600
@@ -11,7 +11,8 @@
timer_int.o )

oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
-oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o
+oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o \
+ cell/spu_profiler.o cell/vma_map.o cell/spu_task_sync.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
oprofile-$(CONFIG_6xx) += op_model_7450.o
Index: linux-2.6.20-rc1/arch/powerpc/oprofile/op_model_cell.c
===================================================================
--- linux-2.6.20-rc1.orig/arch/powerpc/oprofile/op_model_cell.c 2007-01-24 12:16:16.225609136 -0600
+++ linux-2.6.20-rc1/arch/powerpc/oprofile/op_model_cell.c 2007-01-29 10:32:03.410785960 -0600
@@ -37,6 +37,17 @@
#include <asm/system.h>

#include "../platforms/cell/interrupt.h"
+#include "cell/pr_util.h"
+
+/* spu_cycle_reset is the number of cycles between samples.
+ * This variable is used for SPU profiling and should ONLY be set
+ * at the beginning of cell_reg_setup; otherwise, it's read-only.
+ */
+static unsigned int spu_cycle_reset = 0;
+unsigned int khzfreq;
+
+#define NUM_SPUS_PER_NODE 8
+#define SPU_CYCLES_EVENT_NUM 2 /* event number for SPU_CYCLES */

#define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */
#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying
@@ -50,7 +61,6 @@
#define NUM_TRACE_BUS_WORDS 4
#define NUM_INPUT_BUS_WORDS 2

-
struct pmc_cntrl_data {
unsigned long vcntr;
unsigned long evnts;
@@ -134,6 +144,7 @@
/*
* Firmware interface functions
*/
+
static int
rtas_ibm_cbe_perftools(int subfunc, int passthru,
void *address, unsigned long length)
@@ -480,7 +491,22 @@
struct op_system_config *sys, int num_ctrs)
{
int i, j, cpu;
+ spu_cycle_reset = 0;

+ /* The cpufreq_quick_get function requires that cbe_cpufreq module
+ * be loaded. This function is not actually provided and exported
+ * by cbe_cpufreq, but it relies on cbe_cpufreq initialize kernel
+ * data structures. Since there's no way for depmod to realize
+ * that our OProfile module depends on cbe_cpufreq, we currently
+ * are letting the userspace tool, opcontrol, ensure that the
+ * cbe_cpufreq module is loaded.
+ */
+ khzfreq = cpufreq_quick_get(smp_processor_id());
+
+ if (ctr[0].event == SPU_CYCLES_EVENT_NUM) {
+ spu_cycle_reset = ctr[0].count;
+ return;
+ }
pm_rtas_token = rtas_token("ibm,cbe-perftools");
if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n",
@@ -566,6 +592,8 @@
;
}

+
+
/* This function is called once for each cpu */
static void cell_cpu_setup(struct op_counter_config *cntr)
{
@@ -573,6 +601,9 @@
u32 num_enabled = 0;
int i;

+ if (spu_cycle_reset)
+ return;
+
/* There is one performance monitor per processor chip (i.e. node),
* so we only need to perform this function once per node.
*/
@@ -607,7 +638,121 @@
;
}

-static void cell_global_start(struct op_counter_config *ctr)
+static int calculate_lfsr(int n)
+{
+#define size 24
+ int i;
+ unsigned int newlfsr0;
+ unsigned int lfsr = 0xFFFFFF;
+ unsigned int howmany = lfsr - n;
+
+ for (i = 2; i < howmany + 2; i++) {
+ newlfsr0 = (((lfsr >> (size - 1 - 0)) & 1) ^
+ ((lfsr >> (size - 1 - 1)) & 1) ^
+ (((lfsr >> (size - 1 - 6)) & 1) ^
+ ((lfsr >> (size - 1 - 23)) & 1)));
+
+ lfsr >>= 1;
+ lfsr = lfsr | (newlfsr0 << (size - 1));
+ }
+ return lfsr;
+
+}
+
+static void pm_rtas_activate_spu_profiling(u32 node)
+{
+ int ret, i;
+ struct pm_signal pm_signal_local[NR_PHYS_CTRS];
+
+ /* Set up the rtas call to configure the debug bus to
+ * route the SPU PCs. Setup the pm_signal for each SPU */
+ for (i = 0; i < NUM_SPUS_PER_NODE; i++) {
+ pm_signal_local[i].cpu = node;
+ pm_signal_local[i].signal_group = 41;
+ pm_signal_local[i].bus_word = 1 << i / 2; /* spu i on
+ * word (i/2)
+ */
+ pm_signal_local[i].sub_unit = i; /* spu i */
+ pm_signal_local[i].bit = 63;
+ }
+
+ pm_rtas_token = rtas_token("ibm,cbe-perftools");
+ if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE \n",
+ __FUNCTION__);
+ }
+
+ ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE,
+ pm_signal_local,
+ 8 * sizeof(struct pm_signal)); //FIXME 8 to #define
+
+ if (ret)
+ printk(KERN_WARNING "%s: rtas returned: %d\n",
+ __FUNCTION__, ret);
+
+}
+
+static void cell_global_start_spu(struct op_counter_config *ctr)
+{
+ int subfunc, rtn_value;
+ unsigned int lfsr_value;
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (cbe_get_hw_thread_id(cpu))
+ continue;
+ /* Setup SPU cycle-based profiling.
+ * Set perf_mon_control bit 0 to a zero before
+ * enabling spu collection hardware.
+ */
+ cbe_write_pm(cpu, pm_control, 0);
+
+ pm_rtas_activate_spu_profiling(cbe_cpu_to_node(cpu));
+
+ if (spu_cycle_reset > 0xFFFFFE)
+ lfsr_value = calculate_lfsr(1); /* use largest possible
+ * value
+ */
+ else
+ lfsr_value = calculate_lfsr(spu_cycle_reset);
+
+ if (lfsr_value == 0) { /* must use a non zero value. Zero
+ * disables data collection.
+ */
+ lfsr_value = calculate_lfsr(1); /* use largest possible
+ * value
+ */
+ }
+
+ lfsr_value = lfsr_value << 8; /* shift lfsr to correct
+ * register location
+ */
+
+ pm_rtas_token = rtas_token("ibm,cbe-spu-perftools");
+
+ if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_ERR
+ "%s: rtas token ibm,cbe-spu-perftools unknown\n",
+ __FUNCTION__);
+ }
+
+ subfunc = 2; // 2 - activate SPU tracing, 3 - deactivate
+
+ rtn_value = rtas_call(pm_rtas_token, 3, 1, NULL, subfunc,
+ cbe_cpu_to_node(cpu), lfsr_value);
+
+ if (rtn_value != 0)
+ printk(KERN_ERR
+ "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
+ __FUNCTION__, rtn_value);
+ }
+
+ start_spu_profiling(spu_cycle_reset);
+
+ oprofile_running = 1;
+}
+
+static void cell_global_start_ppu(struct op_counter_config *ctr)
{
u32 cpu;
u32 interrupt_mask = 0;
@@ -652,7 +797,44 @@
start_virt_cntrs();
}

-static void cell_global_stop(void)
+static void cell_global_start(struct op_counter_config *ctr)
+{
+ if (spu_cycle_reset) {
+ cell_global_start_spu(ctr);
+ } else {
+ cell_global_start_ppu(ctr);
+ }
+}
+
+static void cell_global_stop_spu(void)
+{
+ int subfunc, rtn_value;
+ unsigned int lfsr_value;
+ int cpu;
+
+ oprofile_running = 0;
+
+ for_each_online_cpu(cpu) {
+ if (cbe_get_hw_thread_id(cpu))
+ continue;
+
+ subfunc = 3; // 2 - activate SPU tracing, 3 - deactivate
+ lfsr_value = 0x8f100000;
+
+ rtn_value =
+ rtas_call(pm_rtas_token, 3, 1, NULL, subfunc,
+ cbe_cpu_to_node(cpu), lfsr_value);
+
+ if (rtn_value != 0)
+ printk
+ ("ERROR, rtas call ibm,cbe-spu-perftools failed, return = %d\n",
+ rtn_value);
+ }
+
+ stop_spu_profiling();
+}
+
+static void cell_global_stop_ppu(void)
{
int cpu;

@@ -680,6 +862,16 @@
}
}

+static void cell_global_stop(void)
+{
+ if (spu_cycle_reset) {
+ cell_global_stop_spu();
+ } else {
+ cell_global_stop_ppu();
+ }
+
+}
+
static void
cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
{
@@ -748,10 +940,33 @@
spin_unlock_irqrestore(&virt_cntr_lock, flags);
}

+/* This function is called from the generic OProfile
+ * driver. When profiling PPUs, we need to do the
+ * generic sync start; otherwise, do spu_sync_start.
+ */
+static int cell_sync_start(void)
+{
+ if (spu_cycle_reset)
+ return spu_sync_start();
+ else
+ return DO_GENERIC_SYNC;
+}
+
+static int cell_sync_stop(void)
+{
+ if (spu_cycle_reset)
+ return spu_sync_stop();
+ else
+ return 1;
+}
+
+
struct op_powerpc_model op_model_cell = {
.reg_setup = cell_reg_setup,
.cpu_setup = cell_cpu_setup,
.global_start = cell_global_start,
.global_stop = cell_global_stop,
+ .sync_start = cell_sync_start,
+ .sync_stop = cell_sync_stop,
.handle_interrupt = cell_handle_interrupt,
};
Index: linux-2.6.20-rc1/arch/powerpc/platforms/cell/spufs/sched.c
===================================================================
--- linux-2.6.20-rc1.orig/arch/powerpc/platforms/cell/spufs/sched.c 2007-01-26 16:16:35.219668640 -0600
+++ linux-2.6.20-rc1/arch/powerpc/platforms/cell/spufs/sched.c 2007-01-29 10:32:03.413785504 -0600
@@ -94,7 +94,7 @@
for (node = 0; node < MAX_NUMNODES; node++) {
struct spu *spu;
mutex_lock(&spu_prio->active_mutex[node]);
- list_for_each_entry(spu, &spu_prio->active_list[node], list) {
+ list_for_each_entry(spu, &spu_prio->active_list[node], list) {
struct spu_context *ctx = spu->ctx;
spu->notify_active = 1;
wake_up_all(&ctx->stop_wq);
@@ -129,6 +129,7 @@
ctx->spu = spu;
ctx->ops = &spu_hw_ops;
spu->pid = current->pid;
+ spu->tgid = current->tgid;
spu->prio = current->prio;
spu->mm = ctx->owner;
mm_needs_global_tlbie(spu->mm);
@@ -161,6 +162,7 @@
spu->dma_callback = NULL;
spu->mm = NULL;
spu->pid = 0;
+ spu->tgid = 0;
spu->prio = MAX_PRIO;
ctx->ops = &spu_backing_ops;
ctx->spu = NULL;
Index: linux-2.6.20-rc1/drivers/oprofile/buffer_sync.c
===================================================================
--- linux-2.6.20-rc1.orig/drivers/oprofile/buffer_sync.c 2007-01-18 16:43:11.675529376 -0600
+++ linux-2.6.20-rc1/drivers/oprofile/buffer_sync.c 2007-01-29 10:32:03.415785200 -0600
@@ -26,6 +26,7 @@
#include <linux/profile.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/oprofile.h>

#include "oprofile_stats.h"
#include "event_buffer.h"
Index: linux-2.6.20-rc1/drivers/oprofile/event_buffer.h
===================================================================
--- linux-2.6.20-rc1.orig/drivers/oprofile/event_buffer.h 2007-01-18 16:43:11.673529680 -0600
+++ linux-2.6.20-rc1/drivers/oprofile/event_buffer.h 2007-01-29 10:32:03.417784896 -0600
@@ -19,28 +19,10 @@

/* wake up the process sleeping on the event file */
void wake_up_buffer_waiter(void);
-
-/* Each escaped entry is prefixed by ESCAPE_CODE
- * then one of the following codes, then the
- * relevant data.
- */
-#define ESCAPE_CODE ~0UL
-#define CTX_SWITCH_CODE 1
-#define CPU_SWITCH_CODE 2
-#define COOKIE_SWITCH_CODE 3
-#define KERNEL_ENTER_SWITCH_CODE 4
-#define KERNEL_EXIT_SWITCH_CODE 5
-#define MODULE_LOADED_CODE 6
-#define CTX_TGID_CODE 7
-#define TRACE_BEGIN_CODE 8
-#define TRACE_END_CODE 9
-
+
#define INVALID_COOKIE ~0UL
#define NO_COOKIE 0UL

-/* add data to the event buffer */
-void add_event_entry(unsigned long data);
-
extern struct file_operations event_buffer_fops;

/* mutex between sync_cpu_buffers() and the
Index: linux-2.6.20-rc1/drivers/oprofile/oprof.c
===================================================================
--- linux-2.6.20-rc1.orig/drivers/oprofile/oprof.c 2007-01-18 16:43:11.675529376 -0600
+++ linux-2.6.20-rc1/drivers/oprofile/oprof.c 2007-01-29 10:32:03.419784592 -0600
@@ -53,9 +53,23 @@
* us missing task deaths and eventually oopsing
* when trying to process the event buffer.
*/
+ if (oprofile_ops.sync_start) {
+ int sync_ret = oprofile_ops.sync_start();
+ switch (sync_ret) {
+ case 0: goto post_sync;
+ break;
+ case 1: goto do_generic;
+ break;
+ case -1: goto out3;
+ break;
+ default: goto out3;
+ }
+ }
+do_generic:
if ((err = sync_start()))
goto out3;

+post_sync:
is_setup = 1;
mutex_unlock(&start_mutex);
return 0;
@@ -118,7 +132,19 @@
void oprofile_shutdown(void)
{
mutex_lock(&start_mutex);
+ if (oprofile_ops.sync_stop) {
+ int sync_ret = oprofile_ops.sync_stop();
+ switch (sync_ret) {
+ case 0: goto post_sync;
+ break;
+ case 1: goto do_generic;
+ break;
+ default: goto post_sync;
+ }
+ }
+do_generic:
sync_stop();
+post_sync:
if (oprofile_ops.shutdown)
oprofile_ops.shutdown();
is_setup = 0;
Index: linux-2.6.20-rc1/include/asm-powerpc/oprofile_impl.h
===================================================================
--- linux-2.6.20-rc1.orig/include/asm-powerpc/oprofile_impl.h 2007-01-18 16:43:19.315566704 -0600
+++ linux-2.6.20-rc1/include/asm-powerpc/oprofile_impl.h 2007-01-29 10:32:03.421784288 -0600
@@ -47,6 +47,8 @@
void (*global_start) (struct op_counter_config *);
void (*stop) (void);
void (*global_stop) (void);
+ int (*sync_start)(void);
+ int (*sync_stop)(void);
void (*handle_interrupt) (struct pt_regs *,
struct op_counter_config *);
int num_counters;
Index: linux-2.6.20-rc1/include/asm-powerpc/spu.h
===================================================================
--- linux-2.6.20-rc1.orig/include/asm-powerpc/spu.h 2007-01-24 12:17:30.209676992 -0600
+++ linux-2.6.20-rc1/include/asm-powerpc/spu.h 2007-01-29 10:32:03.423783984 -0600
@@ -128,6 +128,7 @@
struct spu_runqueue *rq;
unsigned long long timestamp;
pid_t pid;
+ pid_t tgid;
int prio;
int class_0_pending;
spinlock_t register_lock;
Index: linux-2.6.20-rc1/include/linux/oprofile.h
===================================================================
--- linux-2.6.20-rc1.orig/include/linux/oprofile.h 2007-01-18 16:43:18.379575976 -0600
+++ linux-2.6.20-rc1/include/linux/oprofile.h 2007-01-29 10:32:03.425783680 -0600
@@ -17,6 +17,28 @@
#include <linux/spinlock.h>
#include <asm/atomic.h>

+/* Each escaped entry is prefixed by ESCAPE_CODE
+ * then one of the following codes, then the
+ * relevant data.
+ * These #defines live in this file so that arch-specific
+ * buffer sync'ing code can access them.
+ */
+#define ESCAPE_CODE ~0UL
+#define CTX_SWITCH_CODE 1
+#define CPU_SWITCH_CODE 2
+#define COOKIE_SWITCH_CODE 3
+#define KERNEL_ENTER_SWITCH_CODE 4
+#define KERNEL_EXIT_SWITCH_CODE 5
+#define MODULE_LOADED_CODE 6
+#define CTX_TGID_CODE 7
+#define TRACE_BEGIN_CODE 8
+#define TRACE_END_CODE 9
+#define XEN_ENTER_SWITCH_CODE 10
+#define SPU_PROFILING_CODE 11
+#define SPU_CTX_SWITCH_CODE 12
+#define SPU_OFFSET_CODE 13
+#define SPU_COOKIE_CODE 14
+
struct super_block;
struct dentry;
struct file_operations;
@@ -35,6 +57,14 @@
int (*start)(void);
/* Stop delivering interrupts. */
void (*stop)(void);
+ /* Arch-specific buffer sync functions.
+ * Return value = 0: Success
+ * Return value = -1: Failure
+ * Return value = 1: Run generic sync function
+ */
+ int (*sync_start)(void);
+ int (*sync_stop)(void);
+
/* Initiate a stack backtrace. Optional. */
void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
/* CPU identification string. */
@@ -56,6 +86,13 @@
void oprofile_arch_exit(void);

/**
+ * Add data to the event buffer.
+ * The data passed is free-form, but typically consists of
+ * file offsets, dcookies, context information, and ESCAPE codes.
+ */
+void add_event_entry(unsigned long data);
+
+/**
* Add a sample. This may be called from any context. Pass
* smp_processor_id() as cpu.
*/
Index: linux-2.6.20-rc1/kernel/hrtimer.c
===================================================================
--- linux-2.6.20-rc1.orig/kernel/hrtimer.c 2007-01-18 16:43:05.808489704 -0600
+++ linux-2.6.20-rc1/kernel/hrtimer.c 2007-01-29 10:32:48.321748656 -0600
@@ -335,6 +335,7 @@

return orun;
}
+EXPORT_SYMBOL_GPL(hrtimer_forward);

/*
* enqueue_hrtimer - internal function to (re)start a timer
\
 
 \ /
  Last update: 2007-01-29 20:53    [W:0.263 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site