Messages in this thread | | | Date | Mon, 13 Mar 2006 23:55:31 +0100 | From | Stefan <> | Subject | Crash when bunring CD/DVD |
| |
Hello,
When I try to burn CD's/DVD's my computer crashes.
It seems to be independently from the recording software and from the drive. It occurs with cdrecord (cdrecord-clone version 2.01.01a01 from debian) and growisofs (version 5.21 from debian), and with the drives NEC ND-4550A and LG GMA-4020B.
The problem occurs at least with the kernels 2.6.14.7, 2.6.15.4 and 2.6.16-rc6 (The earlier verions I tested are very unstable. Mostly it was not possible even to boot.)
Unfortunately I cant obtain any error messages, even with several debug options turned on. Here is a screenshot :-) of crashed cdrecord, but there is nothing unnormal to see: http://www.simg.de/tmp10/cd-2.6.16-rc6.png
That is my .config: http://www.simg.de/tmp10/2.6.16-rc6-config
My hardware is: Mainboard: Tyan S2466 (AMD 760MPX Dual Athlon board, latest BIOS) CPU's: 2 x Barton MP 2133 MHz Memory: 2GB registred ECC Drives: see below PCI: see bolow
More Info is attached below. Please mail me, if you need more.
Best regards, Stefan
---------------------------------------------------------------------------------- /proc/scsi:
Attached devices: Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: MAXTOR Model: ATLAS15K2_73SCA Rev: JNZM Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 01 Id: 01 Lun: 00 Vendor: FUJITSU Model: MAN3367MP Rev: 0109 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: _NEC Model: DVD_RW ND-4550A Rev: 1.07 Type: CD-ROM ANSI SCSI revision: ffffffff Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GMA-4020B Rev: A109 Type: CD-ROM ANSI SCSI revision: ffffffff Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: Generic Model: STORAGE DEVICE Rev: 9317 Type: Direct-Access ANSI SCSI revision: 02
---------------------------------------------------------------------------------- ide/scsi boot messages:
Mar 13 20:33:39 ws2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 13 20:33:39 ws2 kernel: AMD7441: IDE controller at PCI slot 0000:00:07.1 Mar 13 20:33:39 ws2 kernel: AMD7441: chipset revision 4 Mar 13 20:33:39 ws2 kernel: AMD7441: not 100%% native mode: will probe irqs later Mar 13 20:33:39 ws2 kernel: AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller Mar 13 20:33:39 ws2 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Mar 13 20:33:39 ws2 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Mar 13 20:33:39 ws2 kernel: hda: HDT722525DLAT80, ATA DISK drive Mar 13 20:33:39 ws2 kernel: hdb: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive Mar 13 20:33:39 ws2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 13 20:33:39 ws2 kernel: hdc: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive Mar 13 20:33:39 ws2 kernel: hdd: HL-DT-ST DVDRAM GMA-4020B, ATAPI CD/DVD-ROM drive Mar 13 20:33:39 ws2 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Mar 13 20:33:39 ws2 kernel: hda: max request size: 1024KiB Mar 13 20:33:39 ws2 kernel: hda: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(100) Mar 13 20:33:39 ws2 kernel: hda: cache flushes supported Mar 13 20:33:39 ws2 kernel: hda: hda1 hda2 hda3 Mar 13 20:33:39 ws2 kernel: hdb: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66) Mar 13 20:33:39 ws2 kernel: Uniform CD-ROM driver Revision: 3.20 Mar 13 20:33:39 ws2 kernel: ide-cd: passing drive hdc to ide-scsi emulation. Mar 13 20:33:39 ws2 kernel: ide-cd: passing drive hdd to ide-scsi emulation. Mar 13 20:33:39 ws2 kernel: qla1280: QLA12160 found on PCI bus 0, dev 9 Mar 13 20:33:39 ws2 kernel: scsi(0): Reading NVRAM Mar 13 20:33:39 ws2 kernel: scsi(0:0): Resetting SCSI BUS Mar 13 20:33:39 ws2 kernel: scsi(0:1): Resetting SCSI BUS Mar 13 20:33:39 ws2 kernel: scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter Mar 13 20:33:39 ws2 kernel: Firmware version: 10.04.42, Driver version 3.25 Mar 13 20:33:39 ws2 kernel: Vendor: MAXTOR Model: ATLAS15K2_73SCA Rev: JNZM Mar 13 20:33:39 ws2 kernel: Type: Direct-Access ANSI SCSI revision: 03 Mar 13 20:33:39 ws2 kernel: scsi(0:1:0:0): Sync: period 9, offset 24, Wide, DT Mar 13 20:33:39 ws2 kernel: Vendor: FUJITSU Model: MAN3367MP Rev: 0109 Mar 13 20:33:39 ws2 kernel: Type: Direct-Access ANSI SCSI revision: 03 Mar 13 20:33:39 ws2 kernel: scsi(0:1:1:0): Sync: period 9, offset 24, Wide, DT Mar 13 20:33:39 ws2 kernel: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device Mar 13 20:33:39 ws2 kernel: scsi1 : SCSI host adapter emulation for IDE ATAPI devices Mar 13 20:33:39 ws2 kernel: Vendor: _NEC Model: DVD_RW ND-4550A Rev: 1.07 Mar 13 20:33:39 ws2 kernel: Type: CD-ROM ANSI SCSI revision: 00 Mar 13 20:33:39 ws2 kernel: scsi2 : SCSI host adapter emulation for IDE ATAPI devices Mar 13 20:33:39 ws2 kernel: Vendor: HL-DT-ST Model: DVDRAM GMA-4020B Rev: A109 Mar 13 20:33:39 ws2 kernel: Type: CD-ROM ANSI SCSI revision: 00 Mar 13 20:33:39 ws2 kernel: SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB) Mar 13 20:33:39 ws2 kernel: SCSI device sda: drive cache: write through Mar 13 20:33:39 ws2 kernel: SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB) Mar 13 20:33:39 ws2 kernel: SCSI device sda: drive cache: write through Mar 13 20:33:39 ws2 kernel: sda: sda1 sda2 sda3 sda4 Mar 13 20:33:39 ws2 kernel: Attached scsi disk sda at scsi0, channel 1, id 0, lun 0 Mar 13 20:33:39 ws2 kernel: SCSI device sdb: 71771688 512-byte hdwr sectors (36747 MB) Mar 13 20:33:39 ws2 kernel: SCSI device sdb: drive cache: write back Mar 13 20:33:39 ws2 kernel: SCSI device sdb: 71771688 512-byte hdwr sectors (36747 MB) Mar 13 20:33:39 ws2 kernel: SCSI device sdb: drive cache: write back Mar 13 20:33:39 ws2 kernel: sdb: sdb1 sdb2 Mar 13 20:33:39 ws2 kernel: Attached scsi disk sdb at scsi0, channel 1, id 1, lun 0 Mar 13 20:33:39 ws2 kernel: sr0: scsi3-mmc drive: 0x/0x caddy Mar 13 20:33:39 ws2 kernel: sr1: scsi3-mmc drive: 0x/0x caddy Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg0 at scsi0, channel 1, id 0, lun 0, type 0 Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg1 at scsi0, channel 1, id 1, lun 0, type 0 Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 5 Mar 13 20:33:39 ws2 kernel: Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 0, type 5
----------------------------------------------------------------------------------
/proc/interrupts: CPU0 CPU1 0: 503595 744635 IO-APIC-edge timer 1: 5040 7016 IO-APIC-edge i8042 2: 0 0 XT-PIC cascade 8: 2 2 IO-APIC-edge rtc 12: 159728 195845 IO-APIC-edge i8042 14: 28317 29306 IO-APIC-edge ide0 15: 0 13 IO-APIC-edge ide1 16: 15882 15870 IO-APIC-level bttv0, ehci_hcd:usb1 17: 44864 44277 IO-APIC-level qla1280, ohci1394 18: 8 8 IO-APIC-level ohci_hcd:usb2, Ensoniq AudioPCI 19: 19338 19233 IO-APIC-level saa7146 (0), ohci_hcd:usb3, eth0 NMI: 64670 98880 LOC: 1248159 1248158 ERR: 0 MIS:
----------------------------------------------------------------------------------
/proc/iomem: 00000000-0009e3ff : System RAM 0009e400-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000ccfff : Video ROM 000cd000-000cd7ff : Adapter ROM 000cd800-000cffff : Adapter ROM 000f0000-000fffff : System ROM 00100000-7fffffff : System RAM 00100000-0042edeb : Kernel code 0042edec-0055e44b : Kernel data 88000000-8801ffff : 0000:00:09.0 c0000000-c0000fff : 0000:00:09.0 c0100000-c01fffff : PCI Bus #01 c0100000-c010ffff : 0000:01:05.0 c0110000-c011ffff : 0000:01:05.1 c0120000-c013ffff : 0000:01:05.0 c0200000-c03fffff : PCI Bus #02 c0201000-c02011ff : 0000:02:07.0 c0201000-c02011ff : saa7146 c0201400-c020147f : 0000:02:08.0 c0300000-c03fffff : PCI Bus #03 c0300000-c0300fff : 0000:03:09.0 c0300000-c0300fff : ohci_hcd c0301000-c0301fff : 0000:03:09.1 c0301000-c0301fff : ohci_hcd c0302000-c03027ff : 0000:03:08.0 c0302000-c03027ff : ohci1394 c0302800-c03028ff : 0000:03:09.2 c0302800-c03028ff : ehci_hcd c0600000-c0600fff : 0000:00:00.0 c4000000-c7ffffff : 0000:00:00.0 d0000000-efffffff : PCI Bus #01 d0000000-dfffffff : 0000:01:05.0 d0000000-dfffffff : vesafb e0000000-efffffff : 0000:01:05.1 f0000000-f00fffff : PCI Bus #02 f0000000-f0000fff : 0000:02:04.0 f0000000-f0000fff : bttv0 f0001000-f0001fff : 0000:02:04.1 f0020000-f003ffff : 0000:02:08.0 fec00000-fec07fff : reserved fee00000-fee00fff : reserved fff80000-ffffffff : reserved
----------------------------------------------------------------------------------
/proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 0c00-0c07 : w83627hf 0cf8-0cff : PCI conf1 1000-10ff : 0000:00:09.0 1410-1413 : 0000:00:00.0 2000-2fff : PCI Bus #01 2000-20ff : 0000:01:05.0 3000-4fff : PCI Bus #02 3000-307f : 0000:02:08.0 3000-307f : 0000:02:08.0 3080-30bf : 0000:02:06.0 3080-30bf : Ensoniq AudioPCI 4000-4fff : PCI Bus #03 4000-407f : 0000:03:08.0 80e0-80ef : amd756-smbus f000-f00f : 0000:00:07.1 f000-f007 : ide0 f008-f00f : ide1
----------------------------------------------------------------------------------
/proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) MP 2800+ stepping : 0 cpu MHz : 2133.684 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow bogomips : 4276.53
processor : 1 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) Processor stepping : 0 cpu MHz : 2133.684 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow bogomips : 4267.23
----------------------------------------------------------------------------------
lspci -vvv 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at c4000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at c0600000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at 1410 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 00002000-00002fff Memory behind bridge: c0100000-c01fffff Prefetchable memory behind bridge: d0000000-efffffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at f000 [size=16]
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03) Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:09.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06) Subsystem: QLogic Corp.: Unknown device 0007 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 88000000 [disabled] [size=128K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=03, sec-latency=69 I/O behind bridge: 00003000-00004fff Memory behind bridge: c0200000-c03fffff Prefetchable memory behind bridge: f0000000-f00fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:01:05.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] (prog-if 00 [VGA]) Subsystem: C.P. Technology Co. Ltd PowerColor R96A-C3N Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at c0120000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:05.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) Subsystem: C.P. Technology Co. Ltd: Unknown device 2065 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: Memory at c0110000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=4K]
0000:02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0001000 (32-bit, prefetchable) [size=4K]
0000:02:05.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x10 (64 bytes) Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: c0300000-c03fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [90] #06 [0080]
0000:02:06.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 3080 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: TERRATEC Electronic GmbH: Unknown device 1156 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=512]
0000:02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) Subsystem: Tyan Computer Tiger MPX S2466 (3C920 Integrated Fast Ethernet Controller) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 3000 [size=128] Region 1: Memory at c0201400 (32-bit, non-prefetchable) [size=128] Expansion ROM at f0020000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 17 Region 0: Memory at c0302000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at 4000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:09.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 2098:2100 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 18 Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:09.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 2098:2100 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 0x10 (64 bytes) Interrupt: pin B routed to IRQ 19 Region 0: Memory at c0301000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:09.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI]) Subsystem: Unknown device 2098:2000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 0x10 (64 bytes) Interrupt: pin C routed to IRQ 16 Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
----------------------------------------------------------------------------------
ver_linux output (Debian 3.1 system) Gnu C 3.3.5 Gnu make 3.80 binutils 2.15 util-linux 2.12p mount 2.12p module-init-tools 3.2-pre1 e2fsprogs 1.37 reiserfsprogs line reiser4progs line PPP 2.4.3 nfs-utils 1.0.6 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.2.1 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.2.1 Modules Loaded - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |