lkml.org 
[lkml]   [2005]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectHOW to handle partitions on SD Card in the driver?
Date
From
Dear all,

I have problem with my new driver that tired to support the partitions
support on SD cards.

My driver supports 4 SD cards at a time.
The driver works well when there are partitions are disabled. i.e. when
alloc_disk(1); - i.e. no partitions. It absolutely fine.

Right now, I am working on getting the driver up with partitions
supported. After making below changes in the gendisk initialization, I
am able to mount the device in the socket 0 but I am NOT able mount the
devices in the rest of the sockets when partitions are enabled?

Changes made in gendisk code
----------------------------
gDisk->gd = alloc_disk(4); /* 3 -> 3 partitions */
gDisk->gd->first_minor = (iSock * 4);

i.e. iSock = device no [0-3] ( 4 devices)

Physical nodes creation
------------------------

To support partitions on device 0
---------------------------------

mknod /dev/tfa0 b 252 0 ; mknod /dev/tfa1 b 252 1
mknod /dev/tfa2 b 252 2 ; mknod /dev/tfa3 b 252 3

To support partitions on device 1
---------------------------------

mknod /dev/tfa4 b 252 4 ; mknod /dev/tfa5 b 252 5
mknod /dev/tfa6 b 252 6 ; mknod /dev/tfa7 b 252 7

To support partitions on device 2
---------------------------------

mknod /dev/tfa8 b 252 8 ; mknod /dev/tfa9 b 252 9
mknod /dev/tfa10 b 252 10 ; mknod /dev/tfa11 b 252 11

To support partitions on device 3
---------------------------------

mknod /dev/tfa12 b 252 12 ; mknod /dev/tfa13 b 252 13
mknod /dev/tfa14 b 252 14 ; mknod /dev/tfa15 b 252 15


With these physical nodes, I thought I am through & it should work.
When a card is inserted in the socket 0, I am able to mount.
#mount /dev/tfa0 /mnt (works fine & mounts)

BUT, when a card is inserted in the socket 3, I am NOT able to mount.
#mount /dev/tfa12 /mnt
Mount: /dev/tfa12 is not a valid block device


However,
I am in bit confusion whether the above mentioned changes to the gendisk
code will suffice to my partition requirement or NOT?

This gendisk is invoked at on every socket initialization i.e. when card
is inserted.

Can anyone convey me where exactly I am missing or why is it failing?
Any suggestion will be greatly helpful?

Thanks & Regards,
Mukund Jampala


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-05 08:09    [W:0.104 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site